Craftsman Snow Removal Equipment Starter

This is a genuine replacement recoil spring that is designed to be used with select lawn and garden equipment engines. The recoil spring is part of the starter pulley assembly. When the starter rope is engaged, the pulley will then engage the recoil spring, which retracts to cause the spinning that helps power the engine. This spring is subject to constant use and can become stretched or even snap over time and with regular use.This genuine OEM recoil spring is manufactured by MTD and designed to exact standards. It can be used in models from MTD, as well as those from RYOBI, Troy-Bilt, Yard Man, Yard Machines, and Bolens. The recoil spring is made of durable metal and sold as an individual part. The rest of the starter components will need to be purchased separately if they need replaced. Always wear gloves when performing engine repairs and be careful when working on the starter system because the springs and pulleys can be under a lot of pressure. Allow the engine to cool completely and disconnect the power before getting started.

This is a starter recoil assembly. It is used when starting small lawn equipment and other machines. It engages the flywheel. With time and use, any or all of the recoil can wear out or become damaged, including the spring, housing, rope, or pulley. If something is damaged or worn out, the entire starter recoil assembly must be replaced. Signs that the part requires a repair include an engine that won't start or has difficulty engaging.Replacing a starter recoil assembly is easy and can be done in about 15 minutes. A nut driver and screwdriver are required for the repair. Wear gloves. Make sure the equipment is completely cooled before beginning the recoil assembly replacement. After putting tension on the spring and pulley, hold the housing securely to prevent it from releasing.The starter recoil assembly is a genuine OEM-authorized replacement part. It is sold individually. The starter recoil assembly is compatible with MTD, Cub Cadet, Yard Machines, Husky, Yard-Man, and Troy-Bilt brands. It is a complete part that includes the housing, rope, pulley, and recoil spring. It works with small engines, lawnmowers, log splitters, trimmers, and other similar equipment.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

A starter handle is a piece that works in combination with several other components to start the engine in numerous machines, including lawn equipment. It works when the user pulls the starter handle grip, attached by a mechanism to the crankshaft. It turns to start the engine. If the starter handle breaks, it will have to be replaced in order to start the machine. Starter handles can become damaged from normal use, misuse, or after an accident.Replacing the starter handle is a simple project. After locating the mechanism it attaches to, typically a sturdy rope or cord, the starter handle should be tied securely to the end of the string. Wear gloves to protect the hands during the process. Test the strength of the attachment before trying to start the machine.This starter handle is a genuine OEM replacement part. It is sold as an individual piece. This starter handle is made of durable, high-quality material. It can be used in devices from MTD, Husky, Troy-Bilt, Yard Machines, and Yard-Man. It is compatible with various lawnmowers, log splitters, trimmers, and other devices with pull start engines.

The recoil starter assembly is comprised of the housing, the recoil spring, the starter pulley, the starter rope, and the plastic starter grip. It creates the motion that spins the flywheel to engage the engine. The grip is pulled, which extends the rope and activates the starter spring, which then engages the starter pulley and the flywheel, respectively. Over time, various components of the recoil starter can become damaged or worn with regular use. This is often going to require a replacement and in most cases, it will be easier to replace the entire assembly than a single component. This genuine OEM recoil starter is manufactured by MTD and is made to exact standards. It can be used with more than 150 MTD engines on lawn equipment, including from brands like Craftsman, Bolens, Yard-Man, Yard Machines, Remington, Husky, RYOBI, and Cub Cadet. This replacement assembly includes a limited parts warranty and includes all components: the plastic housing, starter pulley, pull rope, starter grip, and starter spring. The hardware for securing this housing is sold separately.

This starter ignites the combustion engine for a compatible, small engine snowblower or chainsaw. When operating correctly, through slight force, the user is able to start the engine and associated components. Replacement becomes necessary if recoil abilities are diminished or if the engine won't start when the starter is engaged.This product is a durable metal and plastic component. Use over time or exposure to an outside environment can cause this part to crack or warp, decreasing the ability to start the machine. Replacement is simple and may require a screwdriver, nut driver, and pliers. Remove the screws from the blower housing to expose the recoil starter. Remove the old recoil starter, and replace with a compatible starter part. Refer to the owner's manual for any specific to model safety guidelines or instructions.This part is compatible with MTD, Craftsman, Cub Cadet model small engine snow blowers and chainsaws. It is also an OEM part sourced directly from the manufacturer, and it is sold individually.

This OEM starter grip is a replacement for select Briggs & Stratton engines. The starter rope grip provides the handle that is used to pull the starter rope. When it is pulled, the starter recoil spring engages the flywheel puller, which then causes the flywheel to rotate and starts the rotation of the blade as the engine fires. The starter rope grip is made of durable plastic but it can become damaged or cracked over time. If it is broken, the rope will be unable to be pulled to engage the engine until the part is replaced. This is a genuine starter grip designed to work with a variety of lawn and garden equipment that features a Briggs & Stratton engine with a pull-start. The starter grip is sold in two pieces with the grip and a cap that snaps on once the rope has been tied inside of the handle to secure it in place. The unit is sold individually. This item does not include the rope or any additional parts.

This is a recoil pull starter used in various snowblowers from major manufacturers. The recoil pull starter is a part of the starter assembly and assists with ensuring the engine gets the right amount of power to start when a user pulls the starter rope. Wear and tear or impacts can cause damage to the starter and it will eventually fail. One of the primary symptoms of a bad recoil pull starter is a slack pull cord when trying to engage the engine to use the snowblower. If this occurs, the recoil pull starter needs to be replaced.Turn off the snowblower and disconnect the spark plug wire before removing the recoil housing cap. Untie the pull rope and replace the starter with a new replacement component. Re-tension the spring with the new recoil starter before reattaching the cap that holds the pulley. Reinstall and coil the cord before reassembling other components.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The recoil pull starter is designed to be compatible with snowblowers manufactured by Lawn-Boy, Toro, Tecumseh, and Cub Cadet.

This is a starter dog that is located right next to the retainer in many types of lawn and garden equipment. It is made of durable metal. This part is responsible for engaging the recoil starting system on the engine. Sometimes the starter dog can become damaged or worn, which will result in an engine that has trouble starting. In this situation, the starter dog will need to be replaced to ensure the lawn equipment works as expected.If the starter dog needs to be replaced, a pair of pliers will be needed for the process. Place the tool on a level surface and disconnect the spark plug wire. The blade assembly and clutch assembly will need to be removed to get access to the starter dog. Take this part out of the tool and replace it with a quality new component. Reassembly the other parts before use.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is made to be compatible with lawnmowers, snowblowers, tillers, edgers, and generators manufactured by Tecumseh, Briggs & Stratton, Toro, Cub Cadet, and Craftsman. The starter dog is sold as an individual part.