Craftsman Starter

When you pull the starter rope, it will engage the chainsaw starter pulley, which then makes the flywheel engage and causes the engine to fire up. The assembly consists of a few small working parts that can wear out or become damaged or lost over time. The included spring may wear or you may lose one of the screws that secure it in place. This OEM kit makes it easy to replace the entire assembly with an exact fit for compatible models. When installing this starter pulley kit, remove or disconnect the spark plug for your safety. This genuine OEM chainsaw starter pulley kit is designed for use with a variety of chainsaws that are manufactured by brands like Husqvarna, Craftsman, and Poulan. Check your user manual to confirm part number compatibility for an exact fit. This starter pulley kit is sold individually and comes with everything that you need for a quick and easy replacement.

This is a recoil starter assembly, first designed for rototillers, but also used on some models of wood chippers. It measures 7 inches in diameter and has a metal housing rather than plastic. This makes it more durable, suitable for heavy-duty lawn care responsibilities. The pull cord itself is standard nylon, well suited to pulling a heavier recoil. The purpose of a recoil starter assembly is to provide a relatively low-impact way of starting the engine. Instead of turning a crank, an operator can pull a cord, which is housed inside the starter assembly. Under ordinary circumstances, this assembly will rarely need to be entirely replaced, but damage can occur due to dropping or due to pulling the cord too hard when the engine is seized. In this case, a recoil starter assembly is a drop-in repair. Unscrew the old starter assembly, seat the new one, and screw it in. This is an OEM part sourced directly from the manufacturer, and it is sold individually.

Also known as a rewind starter, the recoil starter assembly is the part in a string trimmer that drives the engine's combustion process. When the component is engaged, the engine can be started by hand to create sufficient speed to bring all of the operating systems on board. In cases where there is damage to the recoil starter assembly, the trimmer will not turn on.Wear and tear from frequent or extended use can cause the recoil starter assembly to fail. The most common symptom of a broken or damaged recoil starter assembly is a slack pull rope. If this happens, the recoil starter will need to be replaced as the equipment cannot be used without a working recoil starter. Replacing the part will require a set of work gloves and basic tools. The housing cap and rope should be removed before replacement.This recoil starter assembly is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The starter assembly is compatible with several string trimmers manufactured by Craftsman, MTD, and Troy-Bilt.

The starter assembly is an important component found in many Craftsman string trimmers. The starter assembly is composed of various parts to ensure the engine starts running when a user pulls on the starter rope. The parts included in a starter assembly include the pulley, a return spring, a starter pull cord, and a system similar to a clutch that engages the crankshaft of the engine. Pulling on the starter cord will rotate the starter assembly and turn the crankshaft to start the engine.If any part of the starter assembly is damaged or broken, the assembly will typically need to be replaced. When this happens, the most common symptom is pulling on the starter cord to receive a broken piece of rope. If the starter assembly needs to be replaced, the screws holding it in place should be removed. Take out the old starter assembly before installing the new starter. Make sure the starter is engaged in the crankshaft before replacing screws and other components.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The starter assembly is created for use with string trimmers manufactured by Craftsman.

The string trimmer recoil starter is used to house the recoil pull cord that starts the trimmer. Pulling on the handle of the assembly will cause other elements within the trimmer to engage, so the engine can be fired up.Over time, the string trimmer recoil starter could start to wear down or there might be damage to the trimmer, which results in a broken recoil assembly. If the cover assembly is damaged, it could mean that it is no longer possible to start the trimmer, and it will need to be replaced. This is a genuine OEM replacement part that is sold individually. It will work with string trimmers from a range of different companies. Compatible brands for the string trimmer recoil starter include Craftsman, Cub Cadet, Yard Machines, and MTD.

A recoil pull-start assembly is the engine's starting mechanism. The machine operator pulls on the rope, which activates the pulley system to start the machine's engine. This part is a recoil pull-start assembly kit contains a rope, a pulley, and an innerspring, which are all of the components of the pull start assembly. A pull-start assembly kit may be needed if the recoil or pulley system has broken due to use over time. The rope may become broken or frayed and the plastic on the pulley could crack. While the rope itself is available separately, it's a good idea just to replace the entire pull start assembly kit while in the process of replacing any of the components to ensure even wear. This genuine OEM MTD part is sourced directly from the manufacturer. It is sold individually. It is used on blowers, vacuums, and trimmers that are manufactured by Craftsman, Bolens, MTD, and Troy-Bilt.

This is a genuine replacement pawl assembly for select MTD engines. This pawl assembly attaches to the crankshaft in the motor. It is responsible for rotating the shaft and flywheel as a reaction to the recoil starter rope being pulled. The part is subject to constant motion and can wear down over time or otherwise fail. If the pawl assembly goes bad, the shaft and flywheel will not be able to rotate and the engine will not run properly, if at all. A replacement part like this model will solve the problem for compatible units. This genuine OEM pawl is manufactured by MTD to exact standards to provide a fit for compatible machines from Troy-Bilt, MTD, Cub Cadet, and Yard Man, including blowers and trimmers. This pawl assembly includes the metal housing, two plastic pawls, and two springs, which makes it a complete part that requires no additional purchase. This unit is sold as an individual piece. Ensure the engine is cool prior to repair and wear gloves to ensure hand protection when working on the moving parts of the engine. Disconnect the spark plug to protect from accidental engine engagement, as well.

This is a recoil starter assembly for lawn and garden power equipment. When the recoil starter rope is pulled, this causes the spark which starts the engine.A new recoil starter assembly will be needed if the recoil or pulley system has broken. The rope may become broken or frayed and the plastic on the pulley could crack. If the rope becomes loose and there is no tension when it is pulled, then a new recoil starter assembly will be needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on engines, lawnmowers, lawn tractors, and log splitters that are manufactured by MTD, Yard-Man, Yard Machines, Cub Cadet, Husky, and Troy-Bilt.

A starter housing assembly is a plastic unit that attaches to the top of the engine to protect the starter. It is also where the starter rope is attached and it covers the flywheel that is responsible for engaging the motor. Debris can hit the cover and cause damage, or it could simply become damaged or worn over time. If this happens, you will want to replace it as soon as possible in order to ensure the safe operation of your equipment. This OEM unit includes the top cover, flange, and hardware necessary for installation. When replacing the starter housing or any other internal parts, disconnect the spark plug for safety. Be sure to wear gloves, as well, and follow all instructions for proper installation. This starter housing assembly is a genuine MTD product that can be used with various walk-behind lawnmower engines. It is compatible with select models from MTD, Troy-Bilt, Cub Cadet, Craftsman, Yardman, Yard Machines, Remington, Bolens, LawnChief, Huskee, and Ryobi. Part sold individually.

This starter pulley kit is designed for use on string trimmers. It is made to spin the flywheel so the engine will start up when the starter rope is pulled. Sometimes, the teeth on the starter pulley can wear out with extended use. This can result in teeth that do not contact the pawls on the flywheel. In some cases, the pulley will also wear in the area where the recoil spring attaches. If the string trimmer's engine isn't starting, has trouble starting, or has a pull rope that won't retract, a starter pulley kit offers the replacement parts needed. Before the replacement of the part is done, the engine should be cool to the touch. The wire and boot should also be removed from the spark plug before replacement to prevent starting the engine. This is a genuine OEM component that comes directly from the manufacturer. It's designed for use on gas-powered string trimmers by Husqvarna, Craftsman, and Poulan. It is made of hard plastic and steel and comes with the recoil spring, drive pulley, rewind pulley, and drive spring. This is sold as an individual kit.

The starter spring is what is used to create the recoil to start the engine on pull-start chainsaws, blowers, trimmers, and other lawn equipment. When the starter handle is pulled, the rope extends and pulls on the spring, causing it to tighten and then release, which creates the action to fire the motor. It may also be called the recoil spring, rewind spring, or return spring, but they all refer to the starter spring. Over time, this can become worn with use, and in some situations, it can even break completely. If the starter rope will not rewind into the housing, the spring may be twisted and need to be replaced. If so, this genuine OEM starter spring will do the job for compatible machines. This model is manufactured by Husqvarna and compatible with various Poulan and Husqvarna lawn equipment. This spring may serve as a replacement for many machines including blowers, hedge trimmers, grass trimmers, chain saws, and saws. Check the user manual for compatibility and fit, as well as part numbers. Be sure to install this according to all instructions and diagrams for safe and proper operation.

The starter pawl bridge provides the resistance for the starter rope that is required to fire the engine. The bridge connects to the flywheel and is responsible for making it spin when the starter rope is pulled. Over time, the pawl can become worn with use. In the event that other starter components go bad, those can also damage the pawl. If the flywheel does not engage, it may be a faulty pawl. Always use gloves when replacing engine components and be certain to disconnect the spark plug before working on any engine parts. This OEM starter pawl bridge is manufactured to exact standards and is made by Husqvarna. It is compatible with select Husqvarna and Jonsered trimmers. This durable replacement part is made of metal and sold individually.

This recoil starter spring is what retracts the rope back into the main starter assembly. When the rope is pulled, the spring expands. The release of the rope triggers a retraction, which pulls the rope in and activates the starter, creating the chain reaction that starts the engine. This spring can get twisted or become hyperextended with regular use, in which case the only solution would be to replace the entire spring assembly. This OEM recoil starter spring is manufactured by Husqvarna, with high-quality standards in mind. It is compatible with Poulan, Weed Eater, and Husqvarna machines, including trimmers, leaf blowers, edgers, and pruners. Owners should always consult their parts diagram or owner’s manual for exact part number compatibility. This durable metal spring is designed from high-quality materials and is sold individually. The starter rope and other parts of the assembly are sold separately. Always disconnect the spark plug and wear gloves when performing engine work.