Craftsman String Trimmer Parts

This is a breather assembly that is made for use on many types of lawn and garden equipment. The breather is an important component that helps vent extra air from the crankcase of the engine. If the engine on the equipment is no longer running well, it could be caused by a malfunctioning or broken breather assembly. If this is the case, the part will need to be replaced.Several tools are needed to replace the breather assembly. These include a 7/16th-inch socket, a 3/8th-inch nut drive or socket, a Phillips head screwdriver, a 5/16th-inch nut drive or socket, a 3/8th-inch nut driver or socket, and a pair of pliers. The muffler will need to be removed to gain access to the breather assembly. It can be inspected for damage before being removed. A new part can be installed to get the engine running at its best.This breather assembly is a genuine OEM replacement part that is sourced directly from the manufacturer. It's sold as an individual component. This assembly is made for use with lawnmowers, chipper shredders, snowblowers, leaf blowers, generators, and pressure washers made by Briggs & Stratton, Cub Cadet, Toro, Craftsman, Lawn-Boy, and Simplicity.

The muffler on a lawn or garden machine is meant to cut down on the amount of noise that comes from the engine. It will also prevent sparks from the exhaust system from igniting materials beneath the machine (such as dried grass or other debris). A muffler can wear out after only a few seasons because of the amount of use, the level of dried soot from the engine, and from any holes or cracks that can form in the housing or hoses. This OEM replacement muffler works on a long list of brands of lawn and garden machines, including those from Briggs & Stratton, Cub Cadet, Toro, and Simplicity. It will work with an array of small engines, pressure washers, chippers, and lawn mowers. It ships as a full replacement, including gasket and bolts as well as muffler assembly.

This screw is a common piece of hardware and serves as a replacement for those that are lost, damaged, or missing. It can be used for a range of machines, but it is typically used with lawnmowers and tractors as a means to fasten elements together and to reduce vibration.Although screws are meant to last, they can wear down and break over time. They may also become corroded from the elements. When repairing the machine, there is also the risk that the screws may be lost. Regardless of the problem with the screw, it will need to be replaced before the machine can be operated. The process is usually straightforward, but this can vary based on the location of the screw.The screws can be used with many models of lawn mowers and tractors from Husqvarna, Poulan, Ryobi, Weed Eater, and Jonsered. This is a genuine OEM replacement part sourced from the manufacturer. The screw is sold individually.

This is a metal tappet that is used with many types of lawn equipment with small motors. The tappet is a component that attaches to the push rod. Tappets take the rotating motion provided by the camshaft and transfer it into linear motion so the valves operate properly. Over time, the tappet can break or become damaged and will require replacement.When replacing a tappet, users will need a set of pliers. It's best to wear work gloves during the process and make sure the spark plug wire is disconnected. Items like the mufflers, crankcase breather, and other parts will need to be removed to access the tappet. A visual inspection of the tappets can be done by removing them from the engine to check for damage. Remove the old tappet and replace it with a new part.This tappet is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The tappet is made for use with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, Yard-Man, and MTD.

This is an authentic replacement bowl drain washer for use with lawn mower engines and other types of lawn and garden equipment. The washer is used to help seal the connection between the float bowl and the bowl drain screw in the engine. Although the washer is made from metal, it may still need to be replaced at some point if it becomes corroded, bent, or otherwise damaged. This would mean that it no longer provides a proper seal and that there could be leaks. Owners should periodically take the time to inspect the bowl drain washer, along with other elements of their machine, and replace them as needed. It may be a good idea to have several of the washers on hand. The genuine OEM replacement bowl drain washer is sold individually. It will work with a range of different types of machines including lawn mowers, snowblowers, pressure washers, and other small engines. Compatible brands include Craftsman, Toro, Tecumseh, Lawn-Boy, MTD, and Briggs & Stratton. Buyers should always be sure they are choosing the correct washers for their needs.

A fuel inlet is a connector that allows gasoline from the fuel line of an engine to pass through it into the carburetor. Once in the carburetor, the fuel mixes with air and passes into the cylinder, where it ignites to create power for the engine. Thus, the fuel inlet is attached on the one side the carburetor and to the fuel pipe, or line, on the other. This inlet is used in power tools such as lawn mowers, snowblowers, edgers, pressure washers, chippers, and generators. Periodically, since it is made partially of plastic, the fuel inlet will weather and crack so that it is no longer fuel tight. The main sign to watch out for with fuel inlets is gasoline leakage. This is always a dangerous situation. The user may have to remove the carburetor housing cover to determine whether the leak comes from the fuel line or the inlet valve. It is a good idea to replace each of these pieces at the same time. When choosing a replacement part for the fuel inlet, always use a genuine OEM replacement part like this one. This inlet is compatible with power tools made by Tecumseh, Briggs & Stratton, Toro, MTD, Lawn-Boy, and Cub Cadet.