Parts for Craftsman 358795741: Crankcase / Crankshaft Parts

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This genuine Husqvarna gasket kit for a hedge trimmer or a string trimmer contains the gasket and the fastening components required to attach the gasket to the engine and seal the engine, thereby protecting it from damage. Symptoms of a blown gasket can include smoke pouring out of the exhaust, an overheating engine, or oil leakages. If any of these symptoms can be directly attributed to the gasket, it should be removed and replaced immediately before using the hedge trimmer or string trimmer again. If the blown gasket has also damaged the fastening components, a full gasket kit should be ordered to replace every component of the gasket. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This gasket kit is compatible with the following brands: MTD and Cub Cadet. This part is sold individually.

This is a genuine outer bearing replacement for use on select models of outdoor lawn and garden equipment. The outer bearing is installed on the crankshaft and helps create a flexible joint for the various components to move against. This bearing is made of durable metal material, but over time it can become worn and damaged. It may also come loose or get lost in the process of other repairs. In any case, a faulty bearing will need an immediate and original replacement. Wear gloves and allow the engine to cool completely before beginning any repairs. Be sure to take the crankshaft components apart carefully to access the bearing so that they can be reassembled properly. Bearings should also be lubricated when installed.This is an OEM part that is manufactured to exact standards. It is made by Craftsman and can be used in machines from Weed Eater, Poulan, and Craftsman. This bearing can be used in compatible blowers, edgers, trimmers, pruners, and hedge trimmers. It is sold as an individual unit and there is no additional hardware included.

A crankcase seal is what prevents the oil from leaking between the crankcase opening and the crankshaft. It is often found on the engine's front or underside and seals the timing cover to the crankshaft. Oil seals may become damaged or worn with use. Bearing seizures and grinding indicate that the crankcase seal should be replaced. If there is oil leaking from the crankcase or on the crankshaft, a replacement crankcase seal is necessary.Wear gloves and be sure to collect all the tools needed prior to starting a replacement. Replacing a crankcase seal requires Torx wrenches, a container for fuel, spark plug socket or wrench, adjustable or 10-millimeter wrench, rubber mallet, long-nosed pliers, screwdriver, adjustable pliers, socket set, starter rope, 2-cycle engine oil, ignition gapping gauge, and a razor blade. Follow the operator manual for specific directions.The crankcase seal is a genuine OEM part. It is sold individually. The crankcase seal is black, round, and made from durable, high-quality plastic and metal for extensive use. It can be used in a variety of lawn equipment, including leaf blowers, trimmers, hedge trimmers, and vacuums. It is compatible with various manufacturers, including Craftsman, Husqvarna, Weed Eater, RedMax, and Poulan Pro.

A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.

The carburetor kit has a metal body that is designed to withstand high temperatures, a rubber primer bulb, and a plastic throttle lever. The carburetor is an integral part of engines in lawn and garden equipment. This is where the air and fuel will be mixed before being sent into the engine. The air comes in through the intake tube, and it flows into a smaller tube, where the fuel is injected through small holes in the carburetor body. Then, the two are mixed and released into the engine through a butterfly valve, which controls the amount of fuel going to the engine for optimal performance. The carburetor can become clogged over time or even be broken or damaged. If the engine is not running properly, the carburetor may need to be replaced. This is a simple replacement that only requires a screwdriver. Make sure to always disconnect the spark plug and wear gloves when performing engine repairs. This kit can be used with several models of lawn and garden equipment, including brands like Weed Eater, Paramount, Poulan, Jonsered, and Husqvarna.

This part is a replacement throttle cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective throttle cable in a variety of hedge trimmer models.The throttle cable is what allows the user to change and control the speed of the engine. This part is essential to proper and safe equipment usage and thus should be replaced if snapped, stretched, or ineffective in any way. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this throttle cable, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this throttle cable is suitable for use on hedge trimmers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This muffler spring is used on a variety of lawn and garden equipment, such as blowers and trimmers. It is made of durable metal and is tasked with ensuring the muffler is held in place while cutting down on vibration when using machinery. Over time, the muffler spring can become damaged or even break. When this occurs, the muffler will no longer be held in a stable position. It can also create additional vibration and be harder to use the lawn equipment.Inspecting the muffler spring can give insight into whether it is broken or damaged and if it will need to be replaced. Remove the shroud that covers up the muffler and spring to get a good look at it. If it's dirty, it may need to be cleaned. A muffler spring with damage should be replaced. Disassemble the unit to gain access to the spring so the new part can be placed.This muffler spring is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The part can be used with string trimmers, edgers, leaf blowers, and hedge trimmers manufactured by Poulan, Craftsman, Husqvarna, and Weed Eater. This part is sold individually.

This spark muffler kit is a genuine Husqvarna part. It is manufactured as a replacement part for blowers and hedge trimmers. Mufflers reduce the noise and vibrations associated with using the blower or trimmer.If a muffler is not functioning properly, it may be uncomfortable or unsafe to operate, and the machine may not run in the first place. Replacing the muffler is a relatively simple repair, but some disassembly of the equipment may be required. Be sure to empty the fuel tank before attempting this repair. Allow the engine to cool completely, in addition to disconnecting the spark plug to prevent the equipment from starting accidentally.This spark muffler kit is a genuine OEM part sourced directly from the manufacturer. It has the parts necessary to replace the muffler and is sold individually. It is compatible with machines manufactured by Craftsman, Weed Eater, and Poulan.

The fuel line pickup assembly includes the fuel filter and fuel line. This line carries the fuel to the carburetor, passing it through the filter on the way to remove any impurities that may be in the fuel. This ensures optimal performance and keeps the carburetor in good condition and free from debris and other buildup. Over time, the filter and line can become clogged. Typically, fuel filters are a part of routine maintenance, but they can also fail intermittently from a clog or other issue. In some cases, it may be best to replace the entire pickup assembly. This genuine fuel line pickup assembly is an OEM manufacturer replacement part from Husqvarna. It is designed to be used on select models of hedge trimmers from Poulan, Craftsman, Weed Eater, and Husqvarna. The part should be installed in a well-ventilated area and fuel should always be drained before working on the carburetor or other fuel line parts. Disconnect the spark plug before beginning repairs and be sure to wear gloves for hand protection.