Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Crosley Dryer Switch

Best Seller
Crosley Dryer Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406107

The Dryer Door Switch is an OEM replacement part for Whirlpool dryers. It is a crucial safety component that monitors the opening and closing of the dryer door, preventing the dryer from operating when the door is open.

Symptoms of a faulty Dryer Door Switch include:

  • The dryer failing to start or operate with the door closed
  • The dryer continuing to run or heat even when the door is open
  • Error codes or warning lights related to the door switch sensor

Causes of a bad door switch can include normal wear and tear over time, physical damage from mishandling or impact, or electrical malfunctions.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

This part fixes the following symptoms
  • Doesn't shut off
  • Won't start
  • Will not tumble
See more...
Do-It-Yourself Stories from Customers like You Ignitor coil was not turning on   Harrison N. • El Cajon , CA • March 14, 2021

I realized my load of laundry was still wet after a normal drying cycle. My first action was to turn the dryer on (2010 gas Maytag centennial) and open the front port to look at the ignitor coil. It never turned orange so I knew there must be a problem with the primary circuit. I shut off the dryer, disconnected the power, pulled it away from the wall, shutoff the gas, and removed the back panel. I then disconnected the wires for the thermal fuse and checked its resistance with a multimeter.... Read more

More
$26.95
Compare At:
$31.80
You Save:
$4.85

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Push To Start Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10117655

The Push To Start Switch is an OEM part for Whirlpool dryers. It is the interface between the user and the dryer, initiating the drying cycle when pressed. This switch is essential for the safe and efficient operation of the dryer, ensuring that it starts only when the button is deliberately pressed, thereby preventing accidental start-ups.

Causes of a bad Push To Start Switch can include electrical failures within the switch mechanism, wear and tear from repeated use, or damage from spills or moisture exposure.

Symptoms of a bad Push To Start Switch include:

  • The dryer not starting when the button is pressed
  • The need to press the button multiple times to start the dryer
  • The dryer starting without the button being pressed 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer wouldn't start   Kha L. • Reinholds , PA • December 20, 2015

The help tech helped me troubleshoot what the problem might be, and we narrowed it down to a faulty switch. He helped us pick the right part, and the video was helpful - it gave me the confidence that I could fix it myself. The part came, and it only took me 5 minutes to change out the switch. Now my dryer works great! I saved my wife $500 for a new dryer! :) Read more

More
$53.27
Compare At:
$63.39
You Save:
$10.12

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Dryer Door Switch Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406105

The Dryer Door Switch Assembly is an OEM part for Whirlpool dryers. This component is responsible for detecting when the dryer door is open to prevent the dryer from operating during this state. It ensures safety and energy efficiency by halting the drying cycle if the door is accidentally opened, preventing heat loss and potential hazards.

Causes for a malfunctioning dryer door switch assembly include physical damage from slamming the dryer door, wear and tear from regular use, or electrical issues that impair its function.  

Symptoms of a bad Dryer Door Switch Assembly include:

  • Dryer not starting when the door is closed
  • Dryer continuing to operate when the door is opened
  • The dryer starting intermittently or requiring the door to be slammed to start

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You Roper dryer stops working then heater runs in all cycles including no heat   Eric L. • Hendersonville , TN • January 12, 2015

Background: Roper Electric Dryer model REX6634RQ0 purchased new in early 2006 by my wife. Dryer use profile is low to moderate as it was used by only one person (working from home) from 2006 to late 2007 then moved and stored in a dry basement until mid 2009. Moved and used by primarily just two people (plus occasional children visits) from mid-2009 thru late 2011 with three moves involved with in that time. Then stored in a dry shipping container until moved again in 2013. The multiple... Read more

More
$26.95
Compare At:
$31.80
You Save:
$4.85

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Dryer Door Switch Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10169313

The Door Switch Kit is an OEM part for Whirlpool dryers. This kit includes a door switch that plays a crucial safety and operational role in the dryer's function. It ensures that the dryer operates only when the door is firmly closed, preventing the machine from running with an open door, which could pose safety risks and inefficiency in the drying process.

The causes of door switch failure often include physical damage from slamming the dryer door, wear and tear over time, or electrical issues such as short circuits. 

Symptoms of a faulty Dryer Door Switch include:

  • The dryer not starting when the door is closed 
  • The dryer continuing to run when the door is opened, which poses a significant safety hazard.
  • Unusual noises from the switch area 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms
  • Doesn't shut off
  • Won't start
  • Will not tumble
See more...
Do-It-Yourself Stories from Customers like You Broken timer knob worn out door switch   Kurt H. • Quakertown , PA • January 01, 2016

The timer knob simply pulls off the shaft with a solid, steady pull. Cleaned the timer cavity of lint/dust buildup. Aligned the keying flat of the shaft and knob and pushed the new knob on with careful, steady pressure until it was obviously seated. No tools required other than a vacuum. The door switch would sometimes not shut the dryer off when the door was opened. New switch came with new fast-on connectors. Replacement required opening the top cover of the dryer and hinging it up. This... Read more

More
$21.95
Compare At:
$26.12
You Save:
$4.17

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Dryer Push To Start Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3977456

The Push to Start Switch is an OEM part for Whirlpool dryers. It is responsible for initiating the drying cycle when pressed, sending an electrical signal to start the dryer.

You should replace this push to start switch if it becomes defective. Causes of a bad switch can include electrical failures, physical damage from repeated use, or internal wear over time.

Symptoms of a bad push to start switch include:

  • The dryer not starting when the button is pressed
  • The need to press the button multiple times to start the dryer
  • No response or clicking sound when the button is pressed

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For square top push to start switch, use part number W10156101.

Do-It-Yourself Stories from Customers like You Push button start as soon as you let go of button dryer would stop   Richard S. • Poultney , VT • February 27, 2016

Replaced the duct tape with a new switch Read more

More
$28.26
Compare At:
$33.91
You Save:
$5.65

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Turn Start Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134398300

The Turn Start Switch is an OEM part for Frigidaire dryers. It is responsible for initiating the drying cycle when the switch is turned. This switch is a critical component that engages the dryer’s motor and starts the drying process, ensuring your clothes are dried effectively.

You should replace the turn start switch if it becomes faulty or unresponsive. Causes of a bad start switch can include regular wear and tear from frequent use, electrical issues, or damage due to excessive force or mishandling.

Symptoms of a bad turn start switch include:

  • Dryer not starting when the switch is turned
  • Intermittent starting issues
  • The switch feeling loose or not engaging properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Knob broke on dryer started using pliers to turn it on eventually the stem broke off the start switch   Lisa I. • Cocoa , FL • December 13, 2015

Got the model number off the dryer. Looked it up online. I wanted name brand replacement part. Found this wonderful AppliancePartsPros.com. Looked up my model number, went to top control panel section, ordered the Start Switch. In ONE DAY I received it. Removed the back part of my dryer. Easily removed the broken part. (I did watch a video online). Put on the new Start Switch. Instead of ordering a new knob. I removed a knob from the dryer that I don't use. It turns a buzzer on or off to let... Read more

More
$59.95
Compare At:
$71.34
You Save:
$11.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10237959

The Door Switch is an OEM part for Whirlpool dryers, designed to ensure the appliance operates safely by detecting whether the dryer door is open or closed. This switch plays a crucial role in the dryer's operation, as it prevents the dryer from running when the door is not securely latched, thereby ensuring safety during its use. 

The primary reasons for replacing the Door Switch often involve wear and tear from regular use, damage from an overloaded door, or accidental impacts that compromise the switch's integrity. 

Symptoms for a replacement Door Switch include:

  • The dryer not starting or operating when the door is closed
  • The dryer continuing to run when the door is opened
  • Unusual noises or the appliance starting and stopping abruptly, which may indicate a faulty connection

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Door switch on dryer stopped working.   David S. • Rockmart , GA • May 12, 2018

Went on YouTube and found out how to replace switch. Had it replaced in no time. Read more

More
$42.95
Compare At:
$51.11
You Save:
$8.16

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Door Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813601

The Door Switch is an OEM part for Frigidaire dryers. This part ensures that the dryer operates safely by only allowing the machine to run when the door is completely closed. Positioned typically at the door frame, the switch activates when the door is shut, signaling the control system that it's safe to begin the cycle.

Over time, door switches can wear out or become damaged, which can interfere with the normal operation of the dryer. 

Symptoms of a faulty Door Switch include:

  • The dryer not starting when the door is closed.
  • The dryer stopping unexpectedly, which might be due to a loose or faulty switch.
  • A lack of the usual "click" sound that indicates the door has latched properly, suggesting the switch isn’t engaging.
  • The dryer continuing to run when the door is opened, which poses a significant safety risk.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer will start, run for a few second, then turn off. No error codes   John M. • Waikoloa , HI • April 03, 2014

By reading the forums I first thought it may be the thermostat. I bypassed the thermostat wiring and the dryer still turned off after a few second of running. The second check was for the door switch. I couldn't find an explanation of how to bypass, so I just ordered a new one to try. It worked. Read more

More
$27.95
Compare At:
$33.26
You Save:
$5.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Switch-Pts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10420741

The Push to Start Switch is an OEM replacement part for Whirlpool dryers. Located on the control panel, it allows the user to initiate the drying cycle with the push of a button. This switch is designed to withstand the repetitive motions of starting countless loads over the dryer's lifespan.

Causes can be gradual wear of internal components like contact pads from activations, or moisture intrusion corroding circuit pathways over time.

Symptoms of a faulty push-to-start switch include:

  • The dryer failing to start even when powered on
  • Inconsistent or intermittent operation of the start button
  • The dryer starting unintentionally without input

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The push start button didn't start the dryer   Kirsten K. • Fayetteville , NC • July 21, 2016

I replaced the part i ordered and it worked great! Read more

More
$26.95
Compare At:
$31.80
You Save:
$4.85

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Temperature Selector Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399639

The Temperature Selector Switch is an OEM replacement part for Whirlpool dryers. This electro-mechanical switch allows consumers to choose between heat settings that adequately dry different fabric types.

Causes of a damaged selector switch can include regular wear from hundreds of cycles over the appliance's lifetime. Mineral deposits accumulating inside linkage mechanics may cause rotational movements to stiffen. The physical impacts of shifting internal contact positions could potentially lead to switching issues as well.

Symptoms of a faulty temperature selector involve:

  • Inability to change heat level for desired drying performance  
  • Temperature remaining stuck on highest or lowest settings
  • Lint filter or duct cleaning lights failing to illuminate properly

This OEM replacement is compatible with some Kenmore and KitchenAid electric dryer models too.

Do-It-Yourself Stories from Customers like You 1 no heat on high or low settings and sometimes on medium heat setting 2 no auto cool down   Robert H. • Renton , WA • March 11, 2015

I replaced the cycle switch, fixing the lack of heat. The timer switch replacement fixed the auto cool down. I watched a cycle switch replacement on Youtube, demonstrating removal of the top console, which answered the only question I had about the repair. The timer switch was a hundred bucks. The only thing to be said about that is that it was a lot cheaper than a repairman or replacing the dryer. Read more

More
$53.95
Compare At:
$64.20
You Save:
$10.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Door Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813600

This door switch senses whether the appliance door is closed and signals the controls to run only when it's safe. Replacing a worn or intermittent switch restores dependable starts and proper shutoff when the door opens. What it does:

  • Detects door position and allows operation only when the door is fully closed
  • Interrupts operation when the door opens for safety
  • Common symptoms include: won't start, stops when the door is moved, or "door open" message/error
  • Intermittent starts due to worn actuator or internal switch contacts
What's included:
  • 1 door switch
Install notes:
  • Disconnect power before servicing
  • Access the switch from the front or top panel; release mounting screws or tabs
  • Move wires to the new switch one at a time to maintain correct positions, then secure the switch
  • Test operation before reassembly

More
$48.95
Compare At:
$58.25
You Save:
$9.30

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Door Switch (Snap-Action)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10350906

This snap-action door switch senses whether the door is open or closed. Replacing a worn switch restores proper start/stop control and correct light/fan response tied to door operation, improving safety and reliability.

  • Detects door position and signals the control or interrupts power as designed
  • Helps prevent operation when the door is open
  • Common fix for: won't start, stops when the door shifts, or "door ajar" messages
  • Restores proper interior light or fan behavior linked to door status
What's included: 1 door switch
  • Disconnect power before servicing; for high-voltage appliances (e.g., microwaves), discharge capacitors
  • Match terminal orientation to the original and transfer wires one at a time
  • Install in the original bracket/orientation so the actuator aligns with the latch/striker
  • Verify operation with a continuity test before reassembly

More
$50.22
Compare At:
$59.76
You Save:
$9.54

IN STOCK
Ships Today Guaranteed
Add to Cart
Crosley Light Switch (Door-Activated)
Genuine Frigidaire part
By: Frigidaire
Part Number: 5309918806

This door-activated light switch controls the interior lamp in your refrigerator. Replace a worn or sticking switch to restore dependable lighting and prevent the bulb from staying on and warming the compartment when the door is closed.

  • Opens and closes the light circuit as the door is opened and closed
  • Helps prevent the light from staying on with the door shut
  • Common symptoms: interior light won't turn on, stays on with the door closed, or works intermittently
  • Physical signs may include a stuck/broken plunger or damaged housing
What's included: One light switch Install notes:
  • Disconnect power before servicing
  • Gently pry the old switch from the liner/panel and release its locking tabs
  • Transfer wires one at a time to the same terminals on the new switch
  • Press the new switch fully into place; restore power, and test

This part fixes the following symptoms
  • Light not working
See more...
Do-It-Yourself Stories from Customers like You Light didnt turn on   Robert R. • New Britain , CT • May 25, 2015

Well started with the bulb switch when that didn't work, i continue with the next switch which was the door switch, then it worked just make sure the light bulbs are good, because i went thru 4 bulbs Read more

More
$30.95
Compare At:
$36.52
You Save:
$5.57

IN STOCK
Ships Today Guaranteed
Add to Cart
Crosley Adjustable Buzzer Kit (Mini Buzzer)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694419

This adjustable buzzer kit replaces a failed or noisy mini buzzer to restore audible alerts for cycles, timers and notifications. Compact design lets the appliance signal you reliably when cycles finish or need attention. What it does:

  • Produces audible tones for cycle end, timers and other appliance notifications
  • Replaces buzzers that are silent, intermittent, weak or emitting erratic beeps
  • Helps you hear and identify completed cycles and timed alerts
  • Small, mountable unit that fits behind the control panel and connects to the control board
What's included:
  • One adjustable buzzer kit
Install notes:
  • Disconnect power before servicing to avoid shock risk
  • Access may require removing the control panel; keep fasteners organized for reassembly
  • Disconnect the buzzer wiring harness or connector before removing the old unit; connect the new buzzer the same way
  • Test buzzer function with power restored before fully reassembling

Do-It-Yourself Stories from Customers like You Replaced buzzer and heating element.   Charles B. • Sioux Falls , SD • August 26, 2018

I watched the repair video AppliancePartsPros.com had on each repair and followed the instructions. Read more

More
$64.22
Compare At:
$77.06
You Save:
$12.84

IN STOCK
Ships Today Guaranteed
Add to Cart
Crosley Finish Guard Switch (Rotary, 2-Position)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3405156

This rotary on/off switch controls the dryer's Finish Guard (also called Wrinkle Guard/Wrinkle Shield) feature. Replacing it restores proper control of the post-cycle intermittent tumbling that helps reduce wrinkles, preventing the feature from being stuck on or off.

  • Provides 2-position on/off selection for the Finish Guard/Wrinkle Guard function
  • Failure can cause the feature not to engage or to stay on after the cycle ends
  • Knob may feel loose or fail to click when the switch is worn
  • Mounts in the control console and interfaces with the external selector knob
What's included: 1 rotary switch Installation notes:
  • Disconnect power before servicing
  • Access through the control console; remove paneling as needed
  • Transfer wires one at a time or photograph connections for reference
  • Reinstall using the existing knob and mounting hardware

More
$63.22
Compare At:
$75.86
You Save:
$12.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Crosley Switch, Rocker (Bsq)
Genuine Whirlpool part
By: Whirlpool
Part Number: 74008765

 

Do-It-Yourself Stories from Customers like You My dual front element was burned out in middle (small size) & the switch to go from large to small had stopped working (melted)   Mary C. • Mt Pleasant , PA • August 14, 2016

I ordered the parts on Wednesday and they arrived on Thursday! Wow, that was F-A-S-T !! With some help from my electrician in training son, we were able to swap out the dual element and new rocker switch in about 30 mins! Works perfectly!! Thank you Appliance Parts Pros!! Read more

More
$51.28
Compare At:
$61.02
You Save:
$9.74

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Crosley dryer switch replacement parts are vital for keeping your dryer in top shape. Designed specifically for Crosley dryers, these switches manage power flow and operating functions, ensuring smooth performance. Reliable dryers are key to maintaining your wardrobe, and these replacement parts help you achieve that with ease.

Crosley dryer parts, including OEM switches, offer quality and compatibility akin to the original components. These switches are crafted to integrate seamlessly with your appliance, guaranteeing that features like power control and cycle selection operate flawlessly. Whether you're replacing a faulty switch or upgrading for better durability, these parts are essential for your dryer's longevity.

When you need Crosley dryer switch replacement parts, rest assured there are top-quality options available. These reliable and easy-to-install parts help keep your dryer running efficiently, preserving its convenience and performance.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store