Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Crosley Switch

Best Seller
Crosley Dryer Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406107

The Dryer Door Switch is an OEM replacement part for Whirlpool dryers. It is a crucial safety component that monitors the opening and closing of the dryer door, preventing the dryer from operating when the door is open.

Symptoms of a faulty Dryer Door Switch include:

  • The dryer failing to start or operate with the door closed
  • The dryer continuing to run or heat even when the door is open
  • Error codes or warning lights related to the door switch sensor

Causes of a bad door switch can include normal wear and tear over time, physical damage from mishandling or impact, or electrical malfunctions.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

This part fixes the following symptoms
  • Doesn't shut off
  • Won't start
  • Will not tumble
See more...
Do-It-Yourself Stories from Customers like You Ignitor coil was not turning on   Harrison N. • El Cajon , CA • March 14, 2021

I realized my load of laundry was still wet after a normal drying cycle. My first action was to turn the dryer on (2010 gas Maytag centennial) and open the front port to look at the ignitor coil. It never turned orange so I knew there must be a problem with the primary circuit. I shut off the dryer, disconnected the power, pulled it away from the wall, shutoff the gas, and removed the back panel. I then disconnected the wires for the thermal fuse and checked its resistance with a multimeter.... Read more

More
$26.95
Compare At:
$31.80
You Save:
$4.85

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Large Surface Element Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436001

The Large Surface Element Switch is an OEM replacement part for Frigidaire ranges and cooktops. It is a component that controls the power and temperature settings for one of the larger surface heating elements on the appliance.

Symptoms of a faulty Large Surface Element Switch include:

  • Difficulty in adjusting or maintaining consistent heat settings
  • The surface element not heating up or cycling on and off unexpectedly
  • Flickering or erratic behavior of the surface element
  • Burning smell or visible signs of overheating

Causes of a bad large surface element switch can include normal wear and tear, exposure to excessive heat or moisture, or electrical malfunctions.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore range and cooktop models.

This part fixes the following symptoms
  • Won't start
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You The front left element (8 inch) would stay hot on lower control settings.   Michael S. • West Seneca , NY • September 13, 2022

After an internet search, the likely problem was a faulty "Element Switch.." I actually unplugged the stove and removed the switch (I did NOT disconnect the wires). I obtained the part number on the switch, disassembled it, observed that the contacts were highly degraded, reassembled the switch and reinstalled it back into the stove. This all provided confidence the SWITCH was faulty. One switch on the AppliancePartsPros.com website (AP2591804) looked exactly like the switch in the stove... Read more

More
$34.57
Compare At:
$41.14
You Save:
$6.57

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Lid Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8318084

The Lid Switch is an OEM part for Whirlpool washing machines that is responsible for detecting whether the washing machine lid is closed before allowing the machine to start or continue a cycle. By preventing the washer from operating with an open lid, this switch helps to avoid potential spills or accidents, making it an essential safety feature. The lid switch is activated by the closing of the machine's lid, engaging the washing cycle only when secure closure is detected.

Symptoms of a failing Lid Switch include:

  • The washing machine not starting or completing a cycle
  • The washer not spinning or draining
  • The appliance operating only when the lid is pressed down manually

Causes of a bad Lid Switch can range from mechanical wear and tear to accidental damage, such as slamming the lid too hard or frequently, which can misalign or damage the switch mechanism. Additionally, corrosion caused by moisture or detergent residue can also impair the switch's function.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Won't start
  • Timer will not advance
  • Will not drain
See more...
Do-It-Yourself Stories from Customers like You Our washing machine filled then began washing the wife opened the lid to add one more item and it would no longer wash or spin   Chris J. • Lakeland , FL • January 02, 2018

First I checked the circuit breakers and power to the outlet, then next wanted to check the lid switch, but it wasn't where I had found it on older models. I could hear it clicking on and off as I raised and lowered the lid, but it wasn't visible. I drained the tub through a siphon hose to lighten the machine, so I could slide it away from the wall to better see. Couldn't see the switch anywhere and decided it must be hiding in the raised console, but was unsure of how to attack it without... Read more

More
$34.54
Compare At:
$40.76
You Save:
$6.22

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Small Surface Element Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436000

The Small Surface Element Switch is an OEM replacement part for Frigidaire electric ranges. It serves as the control knob and circuitry to safely power one of the smaller cooking elements. 

Symptoms of a bad surface element switch include:

  • Inability to ignite or regulate heating for its assigned zone
  • Switch knob that feels loose, won't click smoothly, or won't stay set  
  • Intermittent or unreliable power to the smaller element coils
  • Tripped circuit breakers upon use that don't reset

Causes relate to thousands of rotations wearing micro-switches and wiring terminals within the control assembly. Regular cleaning around knobs can prevent accelerated deterioration from baked-on debris conducting excess heat.

This genuine OEM replacement part is compatible with other brands including Electrolux and Kenmore as well.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Surface switches not operating properly; going from cool to very hot etc   Guy G. • Guthrie , OK • October 10, 2014

Replaced all four element switches. Switches arrived within two days of ordering. That's about normal for AppliancePartsPros. They were the correct ones; not generic, and fit the original control knobs perfectly. This kind of service is what I'm used to from ApplicanePartsPros. Read more

More
$62.64
Compare At:
$73.92
You Save:
$11.28

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W11396033

The Door Switch is an OEM part for Whirlpool refrigerators. This switch is crucial for controlling the interior lights and the activation of certain refrigerator functions when the door is opened or closed. 

Symptoms of a failing Door Switch include:

  • Interior lights staying on when the refrigerator door is closed
  • Interior lights not turning on when the door is opened
  • The refrigerator unexpectedly starting or stopping
  • Alarms or indicators malfunctioning, signaling an open door when it is closed

Causes of a bad door switch can involve mechanical failure due to wear and tear from frequent use, damage from impacts (such as slamming the door), or electrical issues like a short circuit or faulty wiring.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Light switch on bottom freezer compartment flakey (intermittant)   Alfred M. • Pahoa , HI • September 07, 2014

I watched the video on replacing the switch on a side freezer where prying out to original switch did not look difficult. I then got on the floor and tried to pry out my switch. Had a terrible time (locking tab or switch body hardened with time?) and mangled the switch terribly and the upper panel of the freezer somewhat, but the switch did come out. AND THEN the top freezer panel with the switch and light assembly fell out into my hands! I was able to unplug one Molex connector and the... Read more

More
$29.30
Compare At:
$34.87
You Save:
$5.57

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Push To Start Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10117655

The Push To Start Switch is an OEM part for Whirlpool dryers. It is the interface between the user and the dryer, initiating the drying cycle when pressed. This switch is essential for the safe and efficient operation of the dryer, ensuring that it starts only when the button is deliberately pressed, thereby preventing accidental start-ups.

Causes of a bad Push To Start Switch can include electrical failures within the switch mechanism, wear and tear from repeated use, or damage from spills or moisture exposure.

Symptoms of a bad Push To Start Switch include:

  • The dryer not starting when the button is pressed
  • The need to press the button multiple times to start the dryer
  • The dryer starting without the button being pressed 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer wouldn't start   Kha L. • Reinholds , PA • December 20, 2015

The help tech helped me troubleshoot what the problem might be, and we narrowed it down to a faulty switch. He helped us pick the right part, and the video was helpful - it gave me the confidence that I could fix it myself. The part came, and it only took me 5 minutes to change out the switch. Now my dryer works great! I saved my wife $500 for a new dryer! :) Read more

More
$53.27
Compare At:
$63.39
You Save:
$10.12

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Water-Level Pressure Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10448876

The Water-Level Pressure Switch is an OEM part for Whirlpool washing machines. It is responsible for detecting the water level inside the washer and communicating this information to the control board to regulate the filling and draining processes. This switch ensures that the washer has the correct amount of water for each cycle, contributing to efficient and effective washing.

You should replace the water-level pressure switch if it malfunctions or fails. Causes of a bad switch can include electrical issues, blockage in the pressure hose, or wear and tear over time.

Symptoms of a bad pressure switch include:

  • Incorrect water levels during cycles
  • The washer not filling or overfilling
  • The washer not advancing to the next cycle
  • Error codes related to water level issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Whirlpool washer failure to complete cycle.   Stan C. • Acworth , GA • January 02, 2019

I contacted AppliancePartsPros and gave them my symptoms and failure codes and they were able to diagnose the problem and send the correct parts to resolve the issue. This is the 3rd or 4th time I've used their service since 2012 and they have been correct on each and every repair issue I've had. Many thanks for the professional advice and help! Read more

More
$46.95
Compare At:
$55.87
You Save:
$8.92

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W11384469

The Door Switch is an OEM part for Whirlpool refrigerators. This switch plays a crucial role in monitoring the status of the refrigerator door. It detects when the door is open and closed and signals the refrigerator to suspend or resume cooling operations accordingly. 

Causes of a bad door switch can include general wear and tear over time, exposure to moisture, or impact damage. Please check for proper connection and that the wires are intact before replacing the switch.

Symptoms of a bad door switch include: 

  • The refrigerator fails to resume cooling after closing the door
  • The inside light fails to turn on when the door is opened
  • Abnormal energy usage due to improper door monitoring

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Do-It-Yourself Stories from Customers like You Fridge interior light kept going out   Phil D. • Phoenix , AZ • June 16, 2014

Replaced door switch - it took less than 5 minutes - works perfectly Read more

More
$29.30
Compare At:
$35.16
You Save:
$5.86

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Micro Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2162361

The Micro Switch is an OEM part for Whirlpool refrigerators that is responsible for controlling the ice and water dispenser. The switch operates by responding to mechanical actions, like the pressing of the dispenser paddle or button to open or close to allow water and ice to be dispensed. 

Symptoms of a bad Micro Switch include:

  • The ice or water dispenser not functioning  
  • Intermittent operation of the dispenser 
  • Stuck dispenser preventing ice or water from stopping

Causes of a bad Micro Switch can include physical damage from heavy use, wear and tear over time, or electrical issues such as short circuits that impair the switch's function.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You Water dispenser stopped working.   Mark S. • Eliot , ME • January 13, 2021

I watched the Appliance Parts Pros repair video and decided to remove the front panel to diagnose the problem. While the repair video is excellent, I could not remove the ice/water dispenser front panel with a putty knife. On my model, 106.56234400, there is no clip that can be released by sliding a putty knife up under the front panel. It took a little effort but I was able to pop the left lower corner clip just by pulling it out with my fingers. Once the cover was off I could see that the... Read more

More
$19.95
Compare At:
$23.94
You Save:
$3.99

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Dryer Door Switch Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406105

The Dryer Door Switch Assembly is an OEM part for Whirlpool dryers. This component is responsible for detecting when the dryer door is open to prevent the dryer from operating during this state. It ensures safety and energy efficiency by halting the drying cycle if the door is accidentally opened, preventing heat loss and potential hazards.

Causes for a malfunctioning dryer door switch assembly include physical damage from slamming the dryer door, wear and tear from regular use, or electrical issues that impair its function.  

Symptoms of a bad Dryer Door Switch Assembly include:

  • Dryer not starting when the door is closed
  • Dryer continuing to operate when the door is opened
  • The dryer starting intermittently or requiring the door to be slammed to start

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You Roper dryer stops working then heater runs in all cycles including no heat   Eric L. • Hendersonville , TN • January 12, 2015

Background: Roper Electric Dryer model REX6634RQ0 purchased new in early 2006 by my wife. Dryer use profile is low to moderate as it was used by only one person (working from home) from 2006 to late 2007 then moved and stored in a dry basement until mid 2009. Moved and used by primarily just two people (plus occasional children visits) from mid-2009 thru late 2011 with three moves involved with in that time. Then stored in a dry shipping container until moved again in 2013. The multiple... Read more

More
$26.95
Compare At:
$31.80
You Save:
$4.85

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Dryer Door Switch Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10169313

The Door Switch Kit is an OEM part for Whirlpool dryers. This kit includes a door switch that plays a crucial safety and operational role in the dryer's function. It ensures that the dryer operates only when the door is firmly closed, preventing the machine from running with an open door, which could pose safety risks and inefficiency in the drying process.

The causes of door switch failure often include physical damage from slamming the dryer door, wear and tear over time, or electrical issues such as short circuits. 

Symptoms of a faulty Dryer Door Switch include:

  • The dryer not starting when the door is closed 
  • The dryer continuing to run when the door is opened, which poses a significant safety hazard.
  • Unusual noises from the switch area 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms
  • Doesn't shut off
  • Won't start
  • Will not tumble
See more...
Do-It-Yourself Stories from Customers like You Broken timer knob worn out door switch   Kurt H. • Quakertown , PA • January 01, 2016

The timer knob simply pulls off the shaft with a solid, steady pull. Cleaned the timer cavity of lint/dust buildup. Aligned the keying flat of the shaft and knob and pushed the new knob on with careful, steady pressure until it was obviously seated. No tools required other than a vacuum. The door switch would sometimes not shut the dryer off when the door was opened. New switch came with new fast-on connectors. Replacement required opening the top cover of the dryer and hinging it up. This... Read more

More
$21.95
Compare At:
$26.12
You Save:
$4.17

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Dryer Push To Start Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3977456

The Push to Start Switch is an OEM part for Whirlpool dryers. It is responsible for initiating the drying cycle when pressed, sending an electrical signal to start the dryer.

You should replace this push to start switch if it becomes defective. Causes of a bad switch can include electrical failures, physical damage from repeated use, or internal wear over time.

Symptoms of a bad push to start switch include:

  • The dryer not starting when the button is pressed
  • The need to press the button multiple times to start the dryer
  • No response or clicking sound when the button is pressed

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For square top push to start switch, use part number W10156101.

Do-It-Yourself Stories from Customers like You Push button start as soon as you let go of button dryer would stop   Richard S. • Poultney , VT • February 27, 2016

Replaced the duct tape with a new switch Read more

More
$28.26
Compare At:
$33.91
You Save:
$5.65

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Surface Element Control Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 316238201

The Surface Element Control Switch is an OEM part for Frigidaire electric ranges and cooktops. It is a critical component that controls the operation of the surface heating elements, allowing you to turn them on and off, and select the desired heat settings.

Symptoms of a faulty Surface Element Control Switch include:

  • Inability to turn on or control the surface heating elements
  • Inconsistent or erratic heat output from the elements
  • Elements not cycling on and off properly or staying on continuously
  • Heating elements not responding to temperature adjustments

Causes of a bad Surface Element Control Switch can include electrical faults, physical damage, or wear and tear over time due to frequent use and exposure to high temperatures. 

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Burner would not turn down on high all the time   Mark M. • Hillsboro , OR • June 29, 2020

Replaced burner switch and all was working properly. Great customer service and part replacement. Read more

More
$69.95
Compare At:
$134.55
You Save:
$64.60

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Turn Start Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134398300

The Turn Start Switch is an OEM part for Frigidaire dryers. It is responsible for initiating the drying cycle when the switch is turned. This switch is a critical component that engages the dryer’s motor and starts the drying process, ensuring your clothes are dried effectively.

You should replace the turn start switch if it becomes faulty or unresponsive. Causes of a bad start switch can include regular wear and tear from frequent use, electrical issues, or damage due to excessive force or mishandling.

Symptoms of a bad turn start switch include:

  • Dryer not starting when the switch is turned
  • Intermittent starting issues
  • The switch feeling loose or not engaging properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Knob broke on dryer started using pliers to turn it on eventually the stem broke off the start switch   Lisa I. • Cocoa , FL • December 13, 2015

Got the model number off the dryer. Looked it up online. I wanted name brand replacement part. Found this wonderful AppliancePartsPros.com. Looked up my model number, went to top control panel section, ordered the Start Switch. In ONE DAY I received it. Removed the back part of my dryer. Easily removed the broken part. (I did watch a video online). Put on the new Start Switch. Instead of ordering a new knob. I removed a knob from the dryer that I don't use. It turns a buzzer on or off to let... Read more

More
$59.95
Compare At:
$71.34
You Save:
$11.39

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Light Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2149705

The Light Switch is an OEM part for Whirlpool refrigerators. This switch is responsible for controlling the refrigerator's interior light, turning it on when the door is opened and off when it is closed.

Symptoms of a failing refrigerator light switch include:

  • The interior light staying on when the refrigerator door is closed
  • The light not activating when the refrigerator door is opened
  • Intermittent or flickering light due to a loose connection or faulty switch

Causes of light switch failure typically involve mechanical wear from repeated use, accumulation of dirt or debris that can interfere with the switch mechanism, or electrical issues such as short circuits.

This OEM part is also compatible with other brands manufactured by Whirlpool, including Maytag, KitchenAid, Jenn-Air, Amana, and others.

This part fixes the following symptoms
  • Light not working
See more...
Do-It-Yourself Stories from Customers like You The refrigerator lights in our whirlpool refrigerator did not go on when the door was opened   Dennis G. • Somerville , NJ • August 16, 2014

We had delayed repairing the problem because we received a price of more than $ 100 from a local appliance repairman. However, after viewing the view on the ApplianceParts Pro website, I saw what an easy repair it would be. After receiving the part from you, I had my son do the repair because I felt it would a good father - son bonding time. It was so easy and he was proud of his ability. Thanks for your excellent repair video and the excellent price. It costs less than $ 22 instead of more... Read more

More
$39.76
Compare At:
$47.31
You Save:
$7.55

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Infinite Switch Top Burner Control Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7403P239-60

The Whirlpool Infinite Switch is an OEM part for Whirlpool ranges. Whirlpool electric ranges. This switch controls the multiple heat settings of the large element, allowing the user to select their desired cooking temperature. It is an important electrical component that regulates burner heating cycles.

Symptoms of a bad infinite switch include:

  • The element not heating up adequately or failing to maintain temperature
  • Inability to select or change heat settings on the
  • Burner operates intermittently or fails to heat properly

Causes of a bad infinite switch can include failure over many heating cycles. The electrical contacts within the switch may become corroded or deteriorate from repeated exposure to cooktop temperatures and cooking residue.

It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric range models.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You The right front "large' heating element was in high heat mode rotating the control knob to a lower heat setting would not reduce heat   Jack D. • Roanoke , VA • November 17, 2014

1. Went online where I watched video about heat control for this Maytag. I then found AppliancePartsPros using Google. I ordered the part and In three days the part arrived. I installed the part and now the problem has been corrected. Read more

More
$34.95
Compare At:
$50.69
You Save:
$15.74

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Looking for Crosley switch replacement parts to keep your appliance running smoothly? These essential components play a vital role in maintaining the performance and reliability of your Crosley appliances, whether it's a washer, dryer, or refrigerator. Switches might seem like small parts, but they have a big job in ensuring your appliances function seamlessly, providing you with the convenience you rely on daily.

Crosley parts, particularly switches, are engineered to meet high standards of quality and compatibility. This is especially true for OEM replacement parts, which are designed to fit perfectly and work efficiently with your specific model. These parts ensure that your appliance operates as it should without any hitches, extending its lifespan and maintaining its efficiency.

With a wide availability of Crosley switch replacement parts, you can easily find the right components to restore your appliance to its optimal performance. Whether you're dealing with a broken switch that needs replacing or simply looking to keep some spare parts on hand, you can be confident in the quality and reliability of these parts. Keeping your Crosley appliances in top shape has never been easier.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store