Cub Cadet Home Maintenance Parts

Replace your walk-behind mower's cracked or leaking 2-gallon fuel tank. Direct fit gas tank for self-propelled and standard models. Essential for safe fuel storage and mower operation.

Engine won't start or runs rough? This ignition coil controls spark to the engine. Common repair for lawn mower starting problems. Easy DIY fix.

Engine won't start or runs rough? This carburetor assembly controls fuel mixture for proper combustion. Common fix for starting and performance issues.

Fix a mower that won't start, runs rough, or stalls frequently with this carburetor assembly. Mixes fuel and air for proper engine ignition.

Mower won't start with the button? This electric starter replaces a failed starter motor that won't crank the engine. Easier than pull-cord starting.

This replacement part is a flywheel. It is a genuine replacement part made by MTD. A flywheel is commonly found in lawnmowers in the engine and was designed to help keep the engine cool during use and allow it to work for many minutes without overheating. A new flywheel might be needed if the engine is overheating more than normal. Be sure to wear working gloves while replacing this part as it can be sharp and cause injury when handled. This part is made of durable metal so that it can operate properly. This flywheel is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure long-lasting use and proper fit.

This carburetor insulator is a genuine MTD part sold individually. This carburetor insulator can be used as a replacement part in lawnmowers, leaf blowers, and wood chippers. The purpose of the carburetor insulator for one of these small engine outdoor appliances is to ensure that the air and fuel taken in by the carburetor is properly cooled and does overheat.If the carburetor insulator is no longer keeping heat away from the area of the carburetor when intaking fuel and air, the carburetor insulator should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This carburetor insulator is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Huskee, Yard-Man, and MasterCut.

Creates a leak-proof seal between the fuel drain plug and tank. Replace if you notice fuel leaking from the drain area. Verify fit with your model number.

It's best to have spare O-ring gaskets on hand to rebuild a carburetor when the need arises. Use this manufacturer-approved replacement part to complete the process. When outdoor power equipment shuts off just after starting or won't start altogether, there may be a problem with the carburetor. It could be a leak that causes compression problems keeping the machine's engine from starting. Gasoline may drip from the float bowl because of an O-ring that won't seal or seat evenly all around, or one that has become brittle over time. This is a genuine OEM part compatible with specific lawnmowers, snowblowers, wood chippers, log splitters, tillers, and other garden maintenance machines from Craftsman, MTD, Cub Cadet, MasterCut, Troy-Bilt, and Yard Machines. It is sold individually.

This fuel tank bottom bracket is a genuine MTD part, sold individually. This fuel tank bottom bracket can be used as a replacement part for small engine outdoor appliances including lawn mowers, leaf blowers, and wood chippers. The purpose of a fuel tank bottom bracket is to stabilize the placement of the fuel tank.If the fuel tank bottom bracket is compromised to the point that it can no longer bolster the placement of the fuel tank, the fuel tank bottom bracket should be removed and replaced by this genuine OEM replacement part, in accordance with the relevant instructions from an appliance manual.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fuel tank bottom bracket is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Huskee, Yard Man, and MasterCut.

Seals the crankshaft to prevent oil and air leaks in small engines. Replace if you notice leaking, hard starting, or loss of compression. Verify fit.

Replacement push rod guide for lawn mower and outdoor power equipment engines. Guides push rods for proper valve operation. Order if cracked or worn.

Piston ring set seals the combustion chamber in lawn mower, snow thrower, and tiller engines. Replace when compression drops or oil consumption increases. Verify fit with your model number.

Starter rope won't retract after pulling? This recoil pulley and spring assembly fixes rope retraction issues on mowers and small engines. Direct fit.

Carburetor gasket for walk-behind mowers. Replace when you notice fuel leaks, hard starting, or during carburetor service. Verify fit with your model.

Fuel filters are created to strain out gas before it reaches the carburetor in lawnmowers and other gardening tools. Located in the fuel line or the fuel tank, it prevents unwanted debris from reaching the carburetor, which can cause engine damage. If the fuel filter is damaged or becomes clogged with material, it no longer offers the same protection to the carburetor. This can lead to difficulty starting the lawnmower and decreased performance. Correcting this issue early can prevent damage that might require a new lawnmower. Maintenance of the lawnmower by adding fuel stabilizer, changing the oil, and replacing the air filter will increase the life of lawn care equioment. Even if no issues are present, the fuel filter should be replaced after about 200 hours of use. Disconnecting the spark plug should be done prior to installing a new fuel filter. This fuel filter is a genuine OEM component directly from the manufacturer and comes as an individual part. It can be used with various Craftsman, Cub Cadet, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and Mastercut lawnmowers, tillers, blowers, and wood chippers.