Cub Cadet Home Maintenance Parts

This is an authentic OEM replacement flange bearing sourced directly from the manufacturer that is a component in many different lawn and garden machines. The flange bearing is used to tightly fit between two connected components. This connection creates an airtight seal. Over time and with normal wear and tear, the flange can become worn and lose the seal. When this happens, the flange will need to be replaced. The flange helps to distribute the weight load in some instances and if it is damaged, the weight would be displaced and could lead to serious energy.Replacement depends on the location of the flange that needs to be replaced. Place the equipment on a flat surface and disconnect the spark plug wire. Take the machine's components off as needed to access the flange and remove it using a pair of pliers. Clean off the components where the bearing was located before installing the new flange bearing. Reassemble the machine using a reverse process.This flange is a heavy-duty part that is sold as an individual item. The flange bearing can be used with lawnmowers and other lawn and garden machines manufactured by Craftsman.

19-inch mulching blade for walk-behind lawn mowers. Replace your damaged, bent, or dull blade to restore cutting performance and mulching effectiveness.

Fix a mower that won't self-propel or has inconsistent drive speed with this drive cable. Connects controls to the transmission for smooth operation.

If your mower won't stop or the brake feels loose, you may need a new brake transmission cable. This control cable manages braking during operation.

Drive control cable engages the gear case on self-propelled lawn mowers. Replace if cable is frayed, broken, or stretched causing loss of drive function.

This is a speed control cable that connects the handle-mounted speed lever to the drive mechanism on a self-propelled lawn mower. It transmits operator input to engage or adjust the ground speed of the mower. Replace this cable if the self-propel function is unresponsive, the mower won't change speeds, or the cable is visibly frayed, stretched, or broken.

Ratchet wheel for lawn mowers. Installs in the drive mechanism to enable continuous motion in one direction. Replace if cracked, worn, or damaged.

Hardware spacer for lawn mowers. Installs on shafts to create proper gaps between connections. Replace if cracked, damaged, or missing for correct fit.

Thumb screw that secures the air cleaner assembly on lawn mower and small engines. Replace if damaged, stripped, or missing due to vibration.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

Rope won't retract or gets stuck when pulling? This recoil starter spring restores smooth pull-and-retract action on walk-behind mowers and tillers.

Replacement muffler stud assembly for lawn mowers, tillers, and small engines. Secures the muffler to the engine block. Replace if broken or missing.

Mower won't start or cuts out during use? A faulty ignition coil prevents spark to the engine. This part restores reliable starting in 30-45 minutes.

Air cleaner housing shields your engine from dirt and debris. Replace if cracked or damaged to maintain proper filtration. Verify fit with your model number.

Fix hard starting, rough idling, or engine stalling issues with this carburetor assembly. Fits gas, push, and self-propelled walk-behind mowers.

This starter relay assembly is a genuine MTD part, sold individually. This starter relay assembly can be used as a replacement part in a lawn mower. The purpose of the starter relay assembly in a lawn mower is to serve as a circuit breaker, diverting battery power and starting the small engine of the appliance.The starter relay assembly might have to be replaced if it shows clear signs of damage within the standard lifespan of a lawn mower. Signs of damage to a starter relay assembly can include a lawn mower that will not start, a starter that remains powered on after the engine starts, or unusual clicking sounds, among other potential signs. If any of these signs of damage are attributable to a damaged starter relay assembly, the component should be removed and replaced by this genuine OEM replacement part before using the lawn mower again.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This starter relay assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Yard Man.