Parts for Poulan 2775 TYPE 3: Cyinder / Crankshaft / Shield Parts

This is a replacement screw for chainsaws. This screw attaches the cylinder shield to the main body of the chainsaw. Over time and with regular use, the screw can become loose or damaged. This causes the cylinder shield to become loose as well, which could lead to the entire chainsaw falling apart during use. A loose cylinder shield exposes the engine to the elements and can cause damage to the engine and the chainsaw's performance.Check the screw to see if it should be replaced by trying to move the cylinder shield. If it stays firm, then the screw is fine. If you feel any looseness or resistance, the screw will need to be replaced as soon as possible. Check the screws for wear and tear frequently.This is a genuine OEM part sourced from the manufacturer, and it is a size T-25 Torx screw. The screw can be installed with a screwdriver, and the installation process should not take too long. Remember to always be careful around a chainsaw's blade, even for this simple repair.

Ignition module for chainsaw engines. Installs on the engine block to control spark timing. Replace if cracked, damaged, or corroded terminals affect ignition.

Anyone who has used a chainsaw knows how loud they are. This is because their engines are repeatedly producing small explosions of fuel and air. Manufacturers know just how loud this can be, so to help subdue their appliances roars, they usually add a muffler to their engines. This genuine OEM replacement chainsaw muffler collects most of the harmful elements that get expelled from the engine and slowly releases the remaining gas in a quieter, gentler way. Unfortunately, mufflers are often positioned in a way that makes them susceptible to damage. Bumps and knocks can dent the muffler, causing it not to work as effectively. If this happens, the chainsaw will perform noticeably louder. Replacing the muffler requires a screwdriver and socket wrench to access the exhaust system. Be sure not to loose any of the small parts, such as washers and screws, that hold the assembly in place. This part is compatible with both Craftsman and Husqvarna appliances and comes sourced from the original manufacturer. This part does not include any additional hardware.

Seals the connection between engine and muffler to prevent air leaks and reduce noise. Replace if damaged, missing, or causing loud operation. Verify fit with your chainsaw model number before ordering.

This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.

M5 x 25mm mounting screw for chainsaw, trimmer, blower, and hedge trimmer assemblies. Replace missing, stripped, or damaged screws during repairs.

Hearing knocking or rattling from your chainsaw engine? A worn piston pin retainer may be the cause. This small metal ring secures the piston pin.

Seals the cylinder to maintain fuel economy and prevent consumption issues. Replace when you notice power loss or excessive fuel use. Verify fit with your model.

Replacement piston for chainsaw engines. Installs inside the cylinder to create compression. Needed when original piston is scored, cracked, or worn.

Seals engine compartment on gas chainsaws to prevent debris and moisture intrusion. Replace if cracked, brittle, or causing leaks. Verify fit with your model.

Rubber intake boot for chainsaw carburetor connection. Replace if cracked, torn, or deteriorated. Ensures proper air seal between air filter and engine.

Fix chainsaw starting problems or rough idling with this carburetor plate. Restores proper fuel flow and engine performance. Straightforward repair.

This is a thin gasket that seals the connection between the carburetor and the engine intake on a chainsaw. It prevents air leaks that could cause the engine to run lean or erratically. Replace this gasket if the engine surges, stalls, or won't idle properly, especially after carburetor removal or servicing.

Replace your chainsaw's carburetor when the original is cracked, leaking, or damaged. Mixes air and fuel for proper engine operation. Direct fit.

Cleans air entering the carburetor. Replace when clogged with debris to prevent rough running. Confirm fit with your chainsaw model number.

The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.

Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.

Symptoms of a bad Fuel Line include:

• The engine failing to start or running inconsistently
• Visible cracks or leaks in the fuel line
• Fuel odor or visible fuel leaks around the equipment
• Reduced engine performance or stalling during operation

This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.

This is a fuel pickup filter that sits inside the fuel tank of a chainsaw or small engine. It screens debris and contaminants from the fuel before it reaches the carburetor, ensuring clean fuel delivery. Replace this filter if the engine is running rough, stalling, losing power, or if the filter is visibly clogged or deteriorated.

Bar adjuster tool for tightening loose chainsaw chains. Angular design makes bar adjustment quick and easy. Simple hand tool for proper tension.