Parts for Ge XFE26JSMPFSS: Dispenser Door Parts

Seals the fresh food door to keep cold air in and reduce moisture. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.

Fastener assembly secures the refrigerator door handle to the door. Replace when brackets are broken, tabs are cracked, or handle comes loose or detaches.

Fix a dispenser that won't seal or lets warm air in. This stop door closes the opening to maintain temperature and keep debris out. Easy DIY fix.

Replacement hinge bushing for refrigerator door hinges. Provides support and smooth door movement. Replace if cracked, worn, or causing grinding noises.

Replaces the cam closure that guides your refrigerator door's pivot for smooth closing and proper alignment. Install when door sags or won't seal evenly.

Ice cubes jamming or spilling in your refrigerator? This stainless steel ice funnel guides cubes from maker to bin, preventing jams and mess.

The Paddle and Skin Assembly is an OEM part for GE refrigerators. It circulates air directly around the refrigerator dispenser area, helping to prevent frost buildup and ensure cool dispensed water and ice. 

Issues like dispenser malfunctions, slow ice production, or frequent defrosting cycles can indicate an underlying issue with this assembly. Over time, excess frost or moisture exposure can damage components.

Causes of a bad dispenser paddle and skin assembly include worn or broken fan blades, cracks in the housing casing, or obstructed air channels.

Symptoms of a bad Paddle and Skin Assembly include: 

• Frost or moisture accumulation around the dispenser 
• Warm dispensed water/ice  
• Slow or inconsistent ice production
• Abnormal fan noises coming from the rear of the refrigerator

This OEM GE part is designed to directly replace the existing assembly and restore optimal airflow throughout the entire refrigerator. Replace yours today to prevent future dispenser issues.

Vertical divider between French doors that seals the gap when closed. Replace if broken, spring fails, or doors don't seal properly. Verify fit by model.

The Dispenser Drip Tray is an OEM replacement part for GE refrigerators designed to catch any drips or spills that may occur during the dispensing process, keeping your refrigerator clean and free from mess.

A bad dispenser drip tray can occur due to regular use or accidental damage. If you notice signs of wear, cracks, or if the tray is missing altogether, it may be time to replace it.

Symptoms of a bad dispenser drip tray:

• Drips or spills on the floor or surrounding surfaces
• Difficulty in cleaning or removing the tray
• Unhygienic conditions due to a damaged or missing tray

Restore your refrigerator by replacing the faulty dispenser drip tray with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

If your refrigerator water line is kinked or damaged, this protective spring coil prevents abrasion and maintains steady flow to your dispenser and ice maker.

Size: 10-32 GXTT FLP.595 S

Replacement hinge bushing sleeve for refrigerator doors. Replace when door binds, closes unevenly, or pivots noisily. Restores smooth operation and alignment. Confirm fit by model number.

Replaces the duct door assembly that directs airflow and seals the vent when closed. Install when door is broken, bent, or stuck to restore proper sealing.

The Motor Duct Door is an OEM part for GE refrigerators. It is the cover that houses the evaporator fan motor and ductwork in the refrigerator. The motor and ductwork circulate cold air throughout the unit to maintain even temperatures for food storage.

Causes of a bad motor duct door can include failed seals that compromise cooling performance or damage to the door and hinges that prevent proper opening and closing. 

Symptoms of a bad motor duct door include: 

• Warm or lukewarm air inside the refrigerator sections  
• Improper airflow causes warmer or colder spots
• Difficulty opening or closing the duct door

Replacing with this genuine GE OEM part allows for optimal air circulation throughout the refrigerator. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Fix a duct door that won't open or close properly with this refrigerator spring. Restores airflow control and eliminates drafts in bottom-mount models.

Refrigerator water tank cover. Mounts over the internal water reservoir to protect components. Replace if cracked, broken, or missing for proper fit.

Fix weak water dispenser flow or ice maker not filling with this refrigerator water inlet valve. Restores proper water flow and stops leaks. Easy DIY fix.

Connects water supply tubing sections in your refrigerator. Replace this plastic compression union if it's cracked, leaking, or broken. Installs inline.

Fix unresponsive refrigerator controls with this switch paddle assembly. Controls access to various features. Easy DIY repair with basic tools needed.

Rubber sealing ring that creates a watertight seal at collar connections. Replace when worn or damaged to stop leaks and restore proper sealing.

Seals the port opening to prevent air and moisture exchange, maintaining proper temperatures. Replace if torn, cracked, or loose to reduce frost buildup. Verify fit with your model number.

Stainless steel door handle for bottom-mount refrigerators. Replace this cosmetic component if cracked, broken, loose, or missing for proper grip.

If your refrigerator dispenser isn't delivering cold water or flow is weak, the cold water tank may need replacement. Restores chilled water delivery.

Replace a cracked or missing middle door bin to restore secure, organized storage for bottles and condiments. Mounts on the dispenser-side door.

Door bin cracked or broken? This refrigerator dispenser door bin restores organization and access to frequently used items. Easy DIY installation.

This ice box door assembly restores a damaged or worn freezer/ice compartment door so the compartment seals and cools correctly. It replaces the entire ice box door to help stop cold-air loss and protect stored frozen items. What it does:

• Replaces a cracked, dented or broken ice box/freezer door
• Restores a proper seal to reduce frost buildup and temperature fluctuations
• Helps stop cold air from escaping, improving cooling performance
• Prevents food from being exposed to warm air and moisture

• Disconnect power to the appliance before starting any repair.
• Remove all contents from the compartment and support the door during removal and installation.
• Installation requires basic hand tools; handle glass or painted surfaces carefully to avoid damage.
• If seals or mounting hardware are worn, inspect and replace separately for best performance.

Fix a non-responsive display or failed touchpad with this refrigerator main control board. Restores user interface and system communication functions.

Mounting screw for refrigerator interior components like fan brackets, ice maker assemblies, and shelving. Replace if stripped, missing, or corroded.

Dispenser not responding or feels loose? This spring paddle restores reliable dispense control and responsive paddle feel. Direct-fit replacement part.