Parts for Kenmore 795.72063316 (79572063316, 795 72063316): Dispenser Part Parts

The Water Filter is an OEM replacement part for LG refrigerators. It is designed to remove impurities, contaminants, and unwanted particles from the water supply, ensuring that the water dispensed and used for ice making is clean and fresh.

Symptoms of a need to replace the water filter:

• Unpleasant taste or odor in the water or ice
• Decreased water flow from the dispenser
• Discoloration or sediment visible in the dispensed water

Causes of a faulty water filter can include general usage over time, exposure to high levels of contaminants in the water supply, or physical damage or clogging of the filter media.

This OEM LG part is also compatible with some Kenmore refrigerator models.

The Dispenser Ice Chute Door is an OEM part for LG side-by-side refrigerators featuring exterior ice and water dispensers. This door guides ice from the storage bin to the access port.

Causes of failure can involve hinge wear reducing tight insulation seals, mineral buildup along tracks impeding smooth operation, or cracking down the center from repeated opening/closing cycles. 

Symptoms of a bad ice chute door include: 

• Difficulty dispensing crushed ice types or cubes  
• Leaks inside the fridge from failed door perimeter seals
• Door remaining partially open or unable to fully close
• Ice backup preventing dispensing when needed

Replace yours today with this genuine OEM LG door to maintain top-quality ice production and on-demand access. Ergonomic design glides open and closed reliably for maximum usability. This replacement part is also compatible with Samsung, GE, and Kenmore side-by-side refrigerators featuring externally mounted dispensers. Proper fit sustains premium performance.

This dispenser door link connects the dispenser actuator to the refrigerator dispenser door so the door opens and closes smoothly when dispensing. Replaces a worn or broken link to restore proper dispenser door movement. What it does:

• Transfers motion from the dispenser actuator to the dispenser door so the door opens when dispensing
• Keeps the dispenser door aligned for proper sealing and closure
• Can fail if the door won't open, sticks, or the dispenser lever feels loose or disconnected
• Compatible with dispenser assemblies that use a separate plastic/metal link between actuator and door

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser trim or front housing—keep fasteners organized
• Handle plastic components carefully to avoid cracking; inspect surrounding parts for wear

This holder bracket replaces a damaged or missing mounting support. It secures an internal component so it stays aligned and stable, helping your appliance operate smoothly without looseness or rattling.

• Provides a rigid mounting point to hold a component or assembly in place
• Maintains alignment to reduce vibration, rubbing, and intermittent operation
• Restores support when the original bracket is cracked, warped, or missing
• Common symptoms include a loose/wobbly part, rattling noises, or visible broken tabs

• Disconnect power to the appliance before servicing
• Note the original bracket's orientation and transfer any clips or screws from the old part
• Use existing hardware and tighten fasteners evenly—do not overtighten
• Verify proper fit and alignment before restoring power

The Ice Door Lever Spring is an OEM component compatible with LG refrigerators. It is part of the mechanism that opens and closes the ice door on LG French door refrigerators. Over time, springs can lose resiliency or become misaligned.

Causes may be extensive usage over years or damage like kinking that compromises spring function.

Symptoms of a bad ice door lever spring include:

• The ice door not latching fully when closed
• Difficulty opening or poor balance while moving the door
• The lever rubbing or catching instead of moving smoothly

This OEM LG part is also compatible with Sears/Kenmore side-by-side refrigerators.

This display power control board assembly powers and controls the appliance's user interface so lights, touchpads and status displays operate correctly. It replaces a failed display board to restore normal panel behavior and feedback. What it does

• Supplies power and signal control to the front display and indicator lights.
• Manages button/touch inputs and display output for the control console.
• Common symptom: display or control lights are dim, flicker, or not lighting.
• Common symptom: control panel is unresponsive, buttons do not register, or display shows no information.

• Disconnect power (unplug appliance or shut off breaker) before any service.
• Handle the board carefully and avoid static discharge; use anti-static precautions if available.
• Verify connector orientation and seating before reassembly; do not force connectors.

This decorative drain is a replacement trim piece that covers and protects the appliance drain opening while maintaining a finished look. It helps keep debris out of the drain and restores the original appearance. What it does:

• Covers the visible drain opening to conceal and protect the drain area.
• Helps prevent large debris from entering the drain channel.
• Restores the exterior trim so the unit looks finished and well-maintained.
• Useful when original decorative trim is cracked, scratched, or missing.

• One decorative drain trim piece

• Designed for simple replacement; usually secures with snap-in tabs or a few screws depending on model.
• Before replacing, power off and follow appliance-specific safety and disassembly steps.
• Handle trim gently to avoid breaking clips; inspect surrounding seal or gasket and replace if damaged.

The Dispenser Micro Switch is an OEM part for LG refrigerators. It is a component of the ice and water dispensing system, responsible for activating the dispenser when the lever is pressed. 

Causes of a bad Dispenser Micro Switch can include mechanical wear from frequent use, failure due to moisture or debris affecting the switch’s contacts, or electrical faults that prevent proper signaling.

Symptoms of a bad Dispenser Micro Switch include:

• The dispenser not releasing ice or water when the lever is pressed.
• Continuous dispensing or dripping after the lever is released.
• Intermittent or no response from the dispenser controls.

This OEM LG part is also compatible with Sears/Kenmore.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

This PCB power control board assembly controls a major appliance's electronic functions and power distribution, restoring responsive controls and reliable operation when the original control board fails. What it does

• Manages power to motors, valves, and sensors and routes control signals to components.
• Replaces a failed or damaged control board that can cause no power, unresponsive controls, or intermittent operation.
• Helps resolve issues like no display, cycles not starting or stopping, and erratic function tied to control electronics.
• Matches the OEM board's connectors and mounting for direct replacement.

• One PCB power control board assembly as shown.

• Disconnect power at the breaker or unplug the appliance before starting.
• Take anti-static precautions and handle the board by edges to avoid ESD damage.
• Some disassembly (control panel or console removal) and connector unplugging required; keep screws and fasteners organized.
• Test functions after installation.