Parts for Whirlpool CHW9900WQ0: 05 - Dispenser Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Washer won't fill or leaks when off? The water inlet valve controls water flow during fill cycles. DIY repair in under 30 minutes with video guide.

This is a small hose that connects to the dispenser valve assembly inside the washing machine, directing water into the detergent or fabric softener dispenser. It ensures proper water flow to the dispenser during the wash cycle. Replace this hose if you notice leaking near the dispenser area, detergent not being flushed into the drum, or visible cracks and deterioration on the hose.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures appliance components and panels so they stay aligned and rattle-free during operation. Replace stripped, missing, or corroded hardware to restore a tight fit and dependable performance. What it does

• Fastens brackets, panels, and internal sub-assemblies in the appliance
• Helps maintain alignment to reduce vibration and rattling
• Replaces missing, rusted, or stripped screws that no longer hold
• Useful when a part won't mount securely or a screw backs out during use

• One screw

• Disconnect power; for gas appliances, also shut off the gas supply
• Compare to the original for length and thread style for the location
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Do not overtighten; if the mounting hole or clip is worn, replace it

This is the inlet nozzle that directs water into the washing machine tub during the fill cycle. It connects to the water inlet valve and channels water flow into the drum. Replace this nozzle if you notice restricted water flow, leaking at the tub entry point, or if the nozzle is cracked or clogged with mineral deposits.

The dispenser actuator cam links the actuator to the dispenser mechanism, converting movement into a precise release. Replacing a worn or broken cam restores smooth, reliable dispensing and helps prevent incomplete or erratic operation. What it does:

• Transfers actuator motion to engage or release the dispenser mechanism
• Maintains correct alignment and travel for consistent operation
• A worn or broken cam can cause the dispenser not to open/close, feel loose or sticky, or make unusual clicking noises
• Common corrective part when the actuator moves but the dispenser doesn't function properly

• 1 dispenser actuator cam

• Disconnect power; turn off water supply if applicable before servicing
• Access the dispenser assembly per your model; note linkage/spring orientation (take photos) before removal
• Align the new cam carefully—do not force; verify smooth actuator travel by hand
• Reassemble and test operation before finalizing

Water distribution lever

Fix F30 error codes and non-dispensing detergent drawers. This dispenser motor assembly controls detergent release timing. 30-minute DIY repair with video.

Secures hoses to fittings in washers and other appliances to prevent leaks. Replace when clamps lose grip or show corrosion. Confirm fit with your model.

Connector lever

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Detergent not dispensing or poor cleaning results? This washer dispenser nozzle directs water flow for proper detergent distribution and cleaning.

Replacement dispenser hose channels detergent from the tray to the wash drum. Needed when original is cracked, torn, or leaking due to wear or rubbing.

Replacement screw that secures panels and internal components in your laundry center. Needed when original fastener is missing, stripped, or corroded.

Covers the detergent dispenser drawer opening on your washer. Replace this plastic cover if it's cracked, broken, or missing to restore a clean appearance.

Fix water leaking from your detergent drawer. This dispenser holds and releases detergent, softener, and bleach at the right time. Easy DIY repair.

Secures internal components in your laundry center. Replace if the retainer clip is cracked, broken, or missing to keep parts properly attached.

Replacement door for laundry center front access. Restores secure closure and proper alignment. Install when original is cracked, bent, or damaged.

Replacement cover that shields and finishes internal assemblies on commercial laundry centers. Install when the original is cracked, warped, or missing.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.