Dixon Lawn Mower Parts

This part is a replacement steering shaft bearing kit. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current steering shaft bearings are broken, faulty, or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The steering shaft bearing kit provides support for the steering shaft and the steer plate. The bearings may become corroded or worn over time, necessitating replacement. Proper tools such as a socket and wrench set are required to install this part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this steering shaft bearing kit, the appropriate owner's manual and equipment diagrams should be referred to. This bearing kit is suitable for use on a variety of different lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This replacement part is a nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different machines. Nuts are responsible for holding other parts in place and secure so that everything can operate smoothly and efficiently while in use.A new nut might be needed if the current one is damaged in any way or missing. This repair should be fairly easy and might only require a screwdriver or pliers if the previous part is stuck. It is possible that nuts can become stripped over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before beginning to replace this part. This nut is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. Be sure to purchase the correct amount as many appliances require more than one.

This is a replacement transaxle bracket. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective transaxle bracket on a variety of lawnmower models. This transaxle bracket is needed to securely mount the transaxle itself to the lawnmower frame. With wear and tear, this part may become damaged, causing the transaxle to loosen. Proper tools are needed to install this part. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this transaxle bracket, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this transaxle bracket is suitable for use on several different lawnmower models and lawn tractors manufactured by Husqvarna and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a replacement idler arm for a lawn mower. The idler arm serves an important function in the mower. The drive belt spins around the idler pulley, which is bolted to the idler arm. If the arm is broken or bent, it will mean that the mower will not work properly. This is because the drive belt may not be able to spin correctly. If there is an issue, owners should repair it soon to ensure their mower continues to work well.Although the idler arm is made from quality metal, it could need to be replaced at some point. It might have been damaged and bent when the mower was in use, for example. There is also the possibility that the arm could become corroded if it has been on the mower for a long time.The replacement black idler arm will work for select lawn mowers from Husqvarna, Poulan, and Jonsered. It is a genuine OEM part that has been sourced from the manufacturer. The idler arm is sold individually.

This front suspension link is a genuine MTD part, sold individually. This front suspension link can be used as a replacement part for a lawn mower or a lawn tractor. The purpose of the front suspension link is to secure the steering shaft of the appliance so its components are maintained and stabilized in their placement.The front suspension link might have to be replaced at some point within the standard lifespan of the appliance in the event that the component suffers damage that renders it incapable of performing its stabilizing function. If the components linked by the front suspension link are no longer held in place by this component or if the front suspension link is damaged in the form of puncturing, scraping, eroding, or any other visible damage, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This front suspension link is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

The Husqvarna belt keeper is a small, metal part designed to be used for lawn tractors. It is used to stabilize the belt with minimum friction on the belt itself. The belt keeper is secured in place using a washer, nut, and bolt. It is secured to the engine pulley. This is an OEM part sourced directly from the manufacturer. It is sold individually.The belt keeper is an essential part to the mower. If there is too much friction placed on the belt itself, it could result in a fire in the engine. This part can break loose and become damaged if not installed correctly. If this part is damaged or falls off, it is recommended to replace it prior to next use of machine to avoid further damage to the mower. All safety precautions should be taken when replacing parts including work gloves to protect the hands, eye glasses, and ensuring there is no power to the machine being worked on.This part is compatible with all Husqvarna produced brands that require this part. These brands include AYP, Craftsman, Jonsered, McCulloh, Poulan, Poulan Pro, RedMax, Dixon, and Weed Eater.

This replacement part is a rear suspension link. It is a genuine replacement part made by Husqvarna. Rear suspension links are used to connect or link the two ends of the suspension components in many machines. This allows movement between different parts so that the engine works properly. A new suspension link might be needed if some parts are no longer working together. This can be because the suspension link has become detached or damaged and should be replaced. Be sure to wear working gloves to replace this part. It is also recommended that the engine be cooled down before replacing this link.This part is a genuine OEM replacement part and is sourced directly from the manufacturer. This part is sold individually and intended for use in different types of lawn mowers.

This grease fitting is a genuine Husqvarna part, sold individually. This grease fitting can be used as a replacement part in a lawn mower. The purpose of a grease fitting in a lawn mower is to allow the lubrication of one or more components within the internal machinery of the lawn mower while regulating the amount of lubricant and ensuring that no overflowing or leaking occurs.The grease fitting in a lawn mower might need to be replaced if the grease fitting fails to prevent leakages or overflowing or if the grease fitting can no longer channel and facilitate the lubrication process. This could occur if the grease fitting is damaged to the point of reduced or no functionality or if the grease fitting is lost or misplaced, in which case it should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This grease fitting is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, Ariens, and Dixon.

This is a shoulder bolt, which is similar in appearance to a screw, but without any threading. It features a shoulder that enables it to rotate, or for parts attached with it to rotate. It is commonly found in gears, pulleys, and moving parts inside many mechanical assemblies, as well as engines. It is also used in many wheel assemblies. It is a good idea to always have at least one spare shoulder bolt on hand as they do wear frequently and will require replacement at least once during the lifespan of a lawnmower. Sometimes known as stripper bolts, the head on these genuine replacement parts have the largest diameter on the part and a screw-like assembly at the bottom. Installation will require a screwdriver. This OEM part works in Husqvarna, Craftsman, Poulan, and Ariens equipment. It is just under 3 in length and roughly 1.2 in diameter. It is designed for a wide array of lawnmower models from the manufacturers mentioned and will secure a gauge wheel to the bracket. This part is sold individually as a replacement part.

Here is a replacement thrust washer that can be used in lawn mowers. A thrust washer is a type of flat washer that is used between a stationary component and a surface that rotates, and they are used for a range of applications, not just for engines. The thrust washer is made from metal and it is durable. However, there may be a time when one or more thrust washers need to be replaced. This might be due to corrosion or damage to the washer. It could also result from the thrust washer becoming lost when the owner is working on the machine. Many buyers will choose to purchase several thrust washers at once so they can have them on hand if they need them in the future. The genuine OEM replacement thrust washer is sold individually. This washer can be used in various models of lawn mower and lawn tractor. It is compatible with more than 150 models. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Murray, and Ariens.

This is a push nut that is used in many different models of lawnmowers. It's a black nut made of durable metal. The push nut is used to secure various components in several locations on lawn and garden equipment. This component is made of strong materials but it can experience damage, wear and tear, or even break over time. This can cause the lawnmower to perform poorly or experience other issues. This is a small component that can be broken or lost and needs to be replaced to ensure the best performance from the lawnmower. A set of pliers and a screwdriver may be required to replace the push nut. The parts that will need to be removed before replacement vary based on the location of the push nut. Disassemble any components in the way before taking out the bad or damaged push nut. Place and tighten the new nut and reassemble the parts.This is a genuine OEM replacement push nut that is directly sourced from the manufacturer. It is sold as an individual component. The push nut is created for use with lawnmowers manufactured by Craftsman, Husqvarna, Weed Eater, Poulan, Murray, Ariens, and Dixon.

A flat washer is used in conjunction with threaded screws or bolts. Before inserting and fastening a bolt into the surface, the fastener is inserted through its end. This is a typical application of washers because they distribute the fastener's load. It also helps with heat and friction reduction as the fastener is tightened. In some implementations, a flat washer also works as a spacer, as well as additional electrical insulation. A flat washer is made from metal. However, it can break down. One of the warning signs of a bad washer is that it doesn't have its distinct circular shape, appearing bent or cut in half. Replacing a flat washer is easy, however, and only requires a screwdriver or socket wrench (depending on the type of fastener). Loosen and remove the fastener. Then, take the broken fastener out. Insert the new flat washer into the fastener. Then, screw the fastener back. This flat washer is an original Husqvarna product. It is made for lawnmower models manufactured by Craftsman, Murray, Husqvarna, Ariens, Poulan, and Weed Eater. It is made of metal and is sold individually. Fasteners are not included.

This tire is a genuine Husqvarna part, sold individually. This tire can be used as a replacement part for a lawn mower. The purpose of a tire is to facilitate the steering of the appliance so an operator can navigate the appliance over a variety of surfaces in order to mow and clip the greenery.The tire of a lawn mower might have to be replaced at some point within the standard lifespan of the appliance if the tread or the internal structure is punctured, torn, ripped, scraped, or eroded beyond repair. If this occurs, the tire should be removed and replaced by this genuine OEM replacement part before using the lawn mower again. It is a simple repair process that will require only basic tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This tire is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, Ariens, and Dixon.

Here is an authentic replacement drive belt from the manufacturer for riding mowers and tractors. It is a replacement for the original belt that came with the machine. The drive belt is also known as the V-belt. This belt is used as a link between the transmission pulley and the engine pulley. The belt provides the mower with the capability to drive. The drive belt gets a substantial amount of use, which means it is subject to wearing down over time. When a belt becomes worn, it can start to stretch, and it could even tear or break entirely. If this were to happen, the mower would no longer be capable of driving. Owners need to check the condition of their belts several times a year if the mower has been used frequently. Replace the belt as needed. The genuine OEM replacement drive belt is sold individually. The belt can work with more than 150 riding mowers and tractors from several brands. It is compatible with certain makes from Husqvarna, Craftsman, and Ariens.