Dixon Lawn Mower Parts

This idler belt keeper is a genuine Husqvarna part, sold individually. This idler belt keeper can be used as a replacement part in a lawn mower. The purpose of the idler belt keeper in a lawn mower is to affix to the idler pulley so that the idler belt can be rotated, facilitating movement during the standard operation of the lawn mower.The idler belt keeper might need to be replaced at some point within the standard lifespan of a lawn mower if the component suffers damage that renders it beyond functionality. If the idler belt keeper is punctured, scraped, warped, eroded, dented, cracked, or otherwise damaged, the component should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, as safe operation of the appliance cannot be guaranteed without the idler belt keeper in place. It is a simple replacement process that will require only basic tools to properly execute.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This idler belt keeper is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Ariens.

This is a genuine replacement shield browning for lawn mowers and garden tractors. The shield is used to protect the grass against heat from the muffler. The lawn mower shield browning can become damaged or worn over time, necessitating replacement. It is important to replace a worn shield browning to avoid damaging the lawn.A lawn mower shield replacement is a simple process. A socket set is needed for this project. The shield is located at the bottom of the lawn mower. Depending on the model, it is typically attached to a lower bracket near the lawn mower blade. The lawn mower shield is held on by two bolts, attached at its sides. To replace the part, remove bolts from the previous mower shield, and replace the bolts with the new mower shield browning. It is possible that the bolts attaching the mower shield browning have worn, in this case, find replacement bolts and dispose of any worn ones. This is a genuine Husqvarna replacement part. This part is compatible with Husqvarna, Poulan, and Craftsman lawn mowers. This part is sold separately.

This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.

This is a lawn tractor fuel line that will work with tractors from a range of manufacturers. The fuel line is used to carry fuel from the tank to the engine carburetor. This will ensure that the tractor can start and run properly. If there is a problem with the fuel line, owners might notice that there are leaks or that they have trouble getting the lawn tractor started.The fuel line is durable, but it could need to be replaced eventually. The material can start to wear down over time, and it might develop cracks. It could also be damaged during the operation of the tractor in some cases. Always wear gloves and work in a well-ventilated area.This lawn tractor fuel line can be used for models of tractors from Husqvarna, Dixon, Poulan, Craftsmen, Ariens, and Southern States. The piece is sold individually. It is a genuine OEM replacement part that was sourced directly from the manufacturer.

This replacement part is a seat switch. It allows the user to control the settings on the seat in many kinds of lawn tractors. This ensures a comfortable user experience during any job. A new seat switch might be needed if the user is no longer able to control or adjust the seat on the lawn mower. This can be due to normal wear and tear, and it is not unusual for this part to wear out after years of use.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This is a genuine OEM mulching blade sourced directly from the manufacturer; it is used on push mowers and riding lawn mowers. A mulching blade is used in place of a regular cutting blade to cut grass clippings finer so that the grass falls back onto the lawn and decomposes. Mulching is beneficial to lawns in many ways. It keeps the soil cooler and reduces water evaporation, meaning the lawn needs less water to stay green. Grass clippings can contain over 70 percent water. Mulching also provides added nutrients to the soil. Mulching blades are also time savers. There are no grass clippings to rake and dispose of after mowing the lawn.A wrench is needed to remove the cutting blade and install the mulching blade. The mower should be on a flat surface with wheel chocks to prevent rolling. Lift the mower deck with a jack to access the cutting blades. Wear gloves to protect the hands. Remove the cutting blade. Install the mulching blade. Lower the mower and remove the chocks. This 46-inch mulching blade is made of metal and sold as an individual unit. It is compatible with push lawn mowers and riding lawn mowers manufactured by Craftsman, Husqvarna, and Poulan

This part is a center front baffle. A baffle is connected beneath the lawnmower deck to help with the airflow. The baffle helps direct the grass clippings out to the discharge chute, into the grass clipping bag, or out as mulch. A new center front baffle may be needed if the original has been broken, cracked, or damaged in any way. The center front baffle is most commonly damaged by impact when it has run into something, such as a stump or concrete. The lawnmower operator may notice that the grass clippings are clumping up or not properly coming out of the discharge chute.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer and it is sold individually. This center front baffle is compatible with lawnmowers and riding lawn tractors manufactured by Husqvarna, Poulan, and Jonsered.

This is a replacement lawn tractor shield-deflector. The shield-deflector, or grass chute, is made from strong, high-quality plastic and attaches to the lawn tractor deck's side. Its purpose is to direct grass clippings and other debris away from the rider while mowing. Over time, the original shield-deflector can become worn and damaged, allowing debris to blow up onto the lawn tractor driver. Debris expelled from the lawn tractor can cause property damage, injury, or even death. Ensure the area is always clear of bystanders while mowing and consult the operator's manual to ensure proper installation of all replacement parts.This shield-deflector is designed to be a replacement for original worn or damaged shield-deflectors on AYP, Jonsered, Redmax, Craftsman, Poulan, Husqvarna, Poulan Pro, Weed Eater, and McCulloch 46-inch lawn tractor decks. This replacement shield-deflector is an OEM part that is sourced directly from the manufacturer. The shield-deflector is sold individually and does not come with hardware included. Tools needed for replacement may consist of; 1/2 inch socket, 7/16 inch socket, vise-grip pliers, a large flat-head screwdriver, and a hammer.

This right hand mandrel cover is a genuine Husqvarna part, sold individually. This right hand mandrel cover can be used as a replacement part in a lawn mower. The purpose of the right hand mandrel cover in a lawn mower is to house and protect the mandrel assembly, which rotates the blades of the lawn mower during typical operation.If the right hand mandrel cover is dented, cracked, warped, eroded, or otherwise damaged to the point of exposing the mandrel assembly, the right hand mandrel cover should be removed and replaced by this genuine OEM replacement part in order to continue safe use of the lawn mower.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. right hand mandrel cover is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This replacement part is a spring. Springs create torque and ensure that components remain secure during equipment use.Due to the amount of pressure they experience during use, springs can snap over time. If a spring has become loose and no longer holds enough tension, it should be replaced.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.