Dixon Lawn Mower Parts

Fix oil leaks or stripped drain threads with this engine oil drain valve. Direct replacement for the oil pan drain fitting on riding mowers and tractors.

Mower won't start or shuts off unexpectedly? This interlock safety switch ensures your riding mower starts only when safety conditions are met. Easy fix.

Replace missing or damaged wheel lug nuts on your riding mower. Secures wheels to the axle hub. Order a new lug nut if stripped, corroded, or lost.

This replacement part is an idler spindle, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is commonly found in lawn mowers and assists the user in turning the machine in different directions. The idler spindle allows for smooth turns and maneuvers during use. A new idler spindle might be needed if the current ones are damaged or broken in any way. It is possible for this part to become worn down or stripped overtime due to normal wear and tear. If the user noticed that the machine is not turning as smoothly or is unable to rotate the steering of the appliance, it might be time to replace the idler spindle. This replacement part is an OEM part sourced directly from the manufacturer. This idler spindle is sold individually. Be sure to purchase the correct amount as some appliances require more than one.

Hex nut for riding mowers and tractors. Secures components in place throughout the machine. Replace if stripped, corroded, or missing during repairs.

Replacement hex bolt for riding mowers and tractors. Secures components throughout the mower deck and chassis. Replace if stripped, missing, or damaged.

Fix a riding mower that won't start or clicks when turning the key. This starter solenoid activates the starter motor. DIY-friendly repair.

Grease cap protects wheel bearings from dirt and debris on riding mowers. Replace when cracked or loose to prevent bearing damage. Verify fit with your model.

This shock absorber is a genuine Husqvarna part, sold individually. This shock absorber can be used as a replacement part in a lawn mower. The purpose of the shock absorber in a lawn mower is to prevent excessive motion and vibration from the steering lever so that oversteering is avoided while the lawn mower is in operation.The shock absorber in a lawn mower might need to be replaced at some point within the typical lifespan of the appliance. If the shock absorber cannot function, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shock absorber is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Jonsered, and Craftsman.

This replacement part is a spring. This is a genuine replacement part made by Husqvarna. This particular spring is found in different types of lawn mowers and provides torque and other energy so that the engine works properly and efficiently. A new spring might be needed if the current one is missing or damaged in any way. It is common that they are put under too much pressure and can snap and need to be replaced. It is recommended that working gloves be worn since these parts can be dangerous to those handling them. Be sure to reference the appropriate user guide for more instructions on how to replace this part.This part is sold as a single piece. This spring is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure proper fit and long lasting use.

This is a spring that is used on many Husqvarna lawnmowers. The component is located in the middle of the retainer and at the drive disk on the rear-wheel drive system. The main purpose of the spring is to ensure proper tension is applied between the drive disk and the pinion gear. Through time or wear and tear, this spring can become damaged or break. If this occurs, the component will need to be replaced in order to use the lawnmower.A screwdriver, socket set, and work gloves will be needed to replace this part. Make sure the lawnmower is powered off and the spark plug has been removed. Take the lawnmower and place it on a solid and sturdy surface while working on it. Remove the wheel where the spring is broken and take out the pinion, pawl, and spring. All of these items can be replaced or the pawl and pinion can be reused with the new spring.This spring is made for several lawnmowers manufactured by Husqvarna. The component is sold on an individual basis. This is a genuine OEM replacement part that is sourced directly from the manufacturer.

Pivot bushing enables smooth rotation between mower components. Replace when worn or damaged to restore proper movement. Verify fit with your model number.

Control knob for riding mowers and tractors. Replaces damaged, cracked, or worn knobs on control panels. Direct fit replacement for various models.

Hardware washer for riding mowers and tractors. Secures components with screws or nuts. Replace if worn, damaged, or missing during maintenance or repair.

Replacement spacer for riding mower tractors. Installs between components to maintain proper alignment. Replace if broken, cracked, or missing.