Dixon Lawn Mower Parts

This is a spring that is used on many Husqvarna lawnmowers. The component is located in the middle of the retainer and at the drive disk on the rear-wheel drive system. The main purpose of the spring is to ensure proper tension is applied between the drive disk and the pinion gear. Through time or wear and tear, this spring can become damaged or break. If this occurs, the component will need to be replaced in order to use the lawnmower.A screwdriver, socket set, and work gloves will be needed to replace this part. Make sure the lawnmower is powered off and the spark plug has been removed. Take the lawnmower and place it on a solid and sturdy surface while working on it. Remove the wheel where the spring is broken and take out the pinion, pawl, and spring. All of these items can be replaced or the pawl and pinion can be reused with the new spring.This spring is made for several lawnmowers manufactured by Husqvarna. The component is sold on an individual basis. This is a genuine OEM replacement part that is sourced directly from the manufacturer.

This part is a replacement pivot bushing. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or worn pivot bushing in a variety of lawn tractor models.Pivot bushings allow different components to pivot around one another without causing too much friction, vibration, or heat. Bushings are particularly subject to wear and tear and will likely need to be replaced when worn or ineffective in order for the lawn tractor to function properly. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this pivot bushing, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this pivot bushing is suitable for use on lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This knob is a genuine MTD part, sold individually. This knob can be used as a replacement part in a lawnmower or an edger.The knob in a lawnmower or an edger might need to be replaced at some point within the typical lifespan of the appliance if it is faulty, damaged, or worn out from general wear and tear with long-term use. If the knob has fallen off, if pieces of it have chipped away over time, or if the knob is simply too damaged to serve its typical function, the knob should be removed and replaced by this genuine OEM replacement part. It is a very simple replacement process that will only require basic tools to properly execute.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This knob is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This replacement part is a washer. Washers typically work with other small parts like screws or nuts to secure components within equipment.Over time and with regular use, washers can occasionally become worn down or damaged, necessitating replacement.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This part is a replacement spacer. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current spacer is broken or in any way damaged, this part can be used as a replacement. It is intended for use with lawn tractors.This spacer is fitted into the lawn tractor's tires to help fill the gap within the tire axle. This ensures that the wheel can rotate smoothly. Proper tools are required to install this part, including a wrench set, hammer, and punch. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this spacer, the appropriate owner's manual and equipment diagrams should be referred to. This spacer is suitable for use on a variety of lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This replacement part is a torsion spring. This is a genuine replacement part made by Husqvarna. This part works within a machine to provide torque to different parts so that the machine can run smoothly and properly. A new torsion spring might be needed if the current one is missing or damaged in any way including being dented or bent. Because of the nature of the spring, this part could snap under pressure and need to be replaced. Work gloves are recommended during this repair as springs can be dangerous if handled improperly. Be sure the engine is off before starting this repair as running parts may affect the installation.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This replacement part is a discharge chute, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A discharge chute allows the user to operate the lawn mower with ease while ensuring that the grass clippings and debris are exposed of in the proper direction. If the current discharge chute is missing or damaged, the user might notice that grass and other debris are being expelled from the device differently than before. This can cause the work area to be messy and user might not be able to complete the lawn mowing job. Be sure the engine is turned off before replacing this chute.This discharge chute is sold as a single piece and is sourced directly from the manufacturer. This part is an OEM replacement part that is meant to fit on different models of lawn mowers. Refer to the owner's manual before attempting this repair.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This interlock switch is a genuine Husqvarna part, sold individually. This interlock switch can be used as a replacement part for outdoor appliances with small engines such as a lawnmower or lawn tractor. The purpose of an interlock switch is to make sure that the engine of the appliance will not start unless the brake is pressed. The primary symptom of a damaged interlock switch is an engine that turns on even when the foot is not actively pressing down on the brake. This is a simple repair process that will only require a wrench set to conduct. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This interlock switch is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This is a tire that is designed to be used with Husqvarna lawnmowers. The tire is made out of a hard rubber and attaches to the mower's caster fork. As time goes on, the tire can experience damage and may no longer work correctly. A visual inspection of the tire will indicate if the tire has any cracks, holes, or other areas of damage. If this has occurred, the tire will need to be replaced for the lawnmower to easily move across the lawn.A wrench set, a socket set, and a nut driver may be required to replace this part. A pair of work gloves can also be used during the replacement process. The process involves removing the bolt, the nut, and the spacer that are located on the caster fork. Next, remove the tire from the wheel so the new tire can be mounted in its place. Reassemble all parts before use.This tire is an authentic OEM replacement part that is sourced directly from the manufacturer. This component is sold on an individual basis. The part is made to be compatible with lawnmowers created by Husqvarna.

This part is a replacement idler pulley. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective idler pulley in a variety of outdoor power equipment models.The idler pulley is an essential component of equipment and thus needs to be replaced if dented, bent, or in any way broken. Disconnect spark plugs before replacing this part. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this idler pulley, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this idler pulley is suitable for use on several different models of outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This belt is a genuine Husqvarna part, sold individually. This belt can be used as a replacement part in a lawn mower. This belt assists in propelling the mower forward.If the belt frequently slips, if the teeth of the belt are sufficiently damaged, or if the belt has been punctured, dented, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part in order for the operator to continue safe and proper use of the lawn mower.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This belt is compatible with the following outdoor appliance brands: Husqvarna.

This replacement part is a bushing. This is a genuine replacement part made by Husqvarna. This part is responsible for adding space in the engine so that parts are able to operate without becoming overrun with friction. This helps keep the engine operating smoothly and effectively. A new bushing might be needed if the user notices unusual noises coming from inside the machine. This can be due to an out-of-place bushing and should be investigated. Be sure the engine is completely powered off and cooled down as often these parts can be hot due to friction. Refer to the proper user manual for more information on how to replace this bushing. This bushing is made of durable metal for long-lasting use.This bushing is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement deck lift shaft spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken, bent, or otherwise defective deck life shaft spring in lawn tractors.The deck lift shaft spring is part of the system that moved the lift shaft. This enables the user to adjust the lawn tractor's deck. With regular equipment use, this spring can become corroded, bent, stretched, or otherwise damaged. If this occurs, this part will need to be replaced. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this deck lift shaft spring, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This deck lift shaft spring can be used with lawn tractor models that have been manufactured by Husqvarna and Poulan. Sold individually.