Dixon Lawn Mower Parts

Main body chassis frame for riding lawn tractors. Replace if cracked, bent, or structurally compromised. Central frame that supports engine and components.

The starter solenoid, also called a starter relay, is a low-amperage relay that completes the high-amperage connection between the starter motor and the battery when the ignition key is turned. The starter solenoid is needed to engage the starter motor. When the ignition is turned on, the battery sends a small electrical charge to the starter solenoid. The solenoid shuts a switch, so a more significant amount of current is sent to the starter motor. The starter motor shaft starts to rotate and engage the teeth of the flywheel. The flywheel then turns the crankshaft to put the engine in motion. A bad solenoid can deny the flow of electricity to the starter motor and prevent engine startup. However, other underlying problems may also exist. The battery may be in good condition, but the engine is not cranking, or clicking and grinding noises may come from the solenoid. These are signs that the starter solenoid should be replaced. This starter solenoid is for use in riding lawn tractors and zero-turn riding mowers. It is compatible with specific models from different brands, including Ariens, Craftsman, Dixon, Husqvarna, Hyper Tough, Jonsered, Murray, Poulan Pro, Redmax, and Snapper. It is a genuine OEM replacement part sourced directly from the manufacturer and is sold individually.

Mower blades won't engage or disengage? This PTO switch controls blade engagement from your console. Direct replacement restores safe cutting control.

If your riding mower is leaking fluid or has dirt in the transaxle, the vent valve may be faulty. This valve releases pressure and keeps contaminants out.

If your riding mower won't move or struggles in freewheel mode, the bypass lever may be damaged. Connects the control rod to the transaxle for proper function.

Seals the transaxle magnet cap on riding mowers and lawn tractors. Replace if oil leaks or seal is cracked. Verify fit with your model number.

Riding mower tractor seal prevents fluid leaks and protects internal components. Replace if you notice leaking or loss of pressure. Verify fit with your model number before ordering.

This is a riding mower fan that works as a replacement for damaged fans for many mower and tractor models. This fan connects to the transaxle above the pulley. The purpose of the fan is simple—it helps to move air around the transmission, which will prevent overheating. If the machine's engine is running hot, a problematic fan could be to blame. Check the fan and replace it if needed. If the fan doesn't run, the tractor will overheat and not operate properly. Overheating could cause further damage to the engine.The fan is made from high-quality plastic. It should last a long time without worry, but blades could crack and break off eventually due to wear and tear. The fan could also be damaged because of an accident. Regardless, replace the fan.The riding mower fan serves as a replacement for tractors and riding mowers from Jonsered, Husqvarna, and Craftsman. It is sold individually and is a genuine OEM replacement part.

This part is a replacement washer. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced washer on outdoor power equipment. This washer is a wave washer and is a standard piece of hardware. A washer allows a screw or bolt to secure equipment more effectively, as it provides a larger bearing surface. Washers can easily become worn, corroded, or lost and may require replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this washer, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this washer is suitable for use on several models of small engine outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

Snap ring secures the transaxle fan in place on riding mower tractors. Replace if original is broken, deformed, or no longer holding the fan securely.

This replacement part is an idler arm and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Idler arms are present in many different types of equipment that require steering. Idler arms are able to control and provide support to the pivoting mechanisms inside the appliance.A new idler arm might be needed if the user is not able to steer or turn properly or smoothly. It is common that idler arms become stripped overtime due to normal wear and tear. Without the idler arm working properly the user might not be able to turn or steer the machine at all. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

Flange nut for lawn tractors and riding mowers. Secures components throughout the machine. Replace if stripped, corroded, or missing during repairs.

This pipe channels exhaust gases away from the engine on the left side of the mower. Replace it if you notice increased engine noise, visible exhaust leaks, rust holes, or if the pipe is bent or damaged.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Compression spring for riding mowers and tractors. Replaces worn, broken, or missing springs in engine and mechanical assemblies. Essential hardware part.

Steering shaft bearing kit for lawn tractors and riding mowers. Replaces worn, damaged, or broken bearings in the steering column assembly.