Parts for Whirlpool GHW9250MW0: 02 - Door And Latch Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This hose clamp secures a rubber or plastic hose to its fitting to maintain a tight, leak-resistant seal. Replace a worn or missing clamp to stop drips and keep appliance water connections secure.

• Fastens a hose to a barb or port to prevent leaks
• Helps keep hoses from slipping off due to vibration or pressure
• Restores proper sealing when a clamp is rusted, bent, or stripped
• Common symptoms: water dripping at a hose joint, loose hose connection, or a clamp that won't tighten

• Disconnect power and shut off the water supply before servicing
• Place a towel to catch residual water when removing hoses
• Position the clamp just behind the hose barb/bead and secure with the appropriate tool
• Restore water and power, then run a quick check for leaks at the connection

The Front Bellow Tub Seal is an OEM replacement part for Whirlpool washing machines. Located behind the washer door opening, it forms a barrier sealing in moisture. The flexible seal compresses tightly against the tub during rotation to prevent water escape through potential seam gaps. 

Causes relate to years of compression from tub movement stressing the material. Mineral buildup prohibiting a flush seal also diminishes its functionality over time.

Symptoms of failure include:

• Water puddling outside the washer around the opening
• Mineral deposits accumulating hints at compromised sealing
• Leakage necessitates replacing the seal to regain integrity

Main seal between the front bulkhead and the outer tub for Whirlpool-made front load washers (Whirlpool, Kenmore Elite, KitchenAid). Clamps are not included. If clamps are needed, order WP8182210 and W10902779.

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Bellow Seal Clamp Ring is an OEM part for Whirlpool washing machines. This ring secures the bellow seal, which is a flexible gasket that provides a watertight seal between the washer door and the drum.

You should replace the bellow seal clamp ring if it becomes damaged or loses its ability to hold the seal tightly. This can occur due to wear and tear, frequent door use, or improper installation. A compromised clamp ring can lead to leaks and inefficient washer operation.

Symptoms of a bad bellow seal clamp ring include:

• Water leaking from the door area during washing
• The bellow seal coming loose or out of place
• Difficulty in keeping the washer door sealed properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Switch Assembly is an OEM part for Whirlpool washing machines. This assembly detects whether the washer door is open or closed, allowing the machine to start or stop the washing cycle accordingly.

Causes of a bad door switch assembly can include wear and tear from frequent use, damage from forceful closing of the door, or electrical issues. A malfunctioning switch can prevent the washer from recognizing a closed door, thus hindering the start of the wash cycle or causing it to stop unexpectedly.

Symptoms of a bad Door Switch Assembly include:

• Washer not starting or stopping mid-cycle
• Error codes indicating door issues
• Washer not spinning or agitating
• Door lock mechanism not engaging or disengaging properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This factory fastener secures appliance components such as panels, brackets, and covers. Replacing a missing, stripped, or rusted screw restores a tight fit and helps reduce vibration, rattling, and shifting during operation.

• Fastens metal or plastic parts to the appliance cabinet/frame
• Helps maintain proper alignment and reduces noise from loose panels
• Replaces hardware that is missing, corroded, or with stripped threads
• Symptoms include rattling, looseness, gaps, or misaligned parts

• Disconnect power; shut off gas/water before servicing
• Support panels to prevent drops; watch for sharp edges
• Start threads by hand to avoid cross-threading; use the correct driver
• Do not overtighten; match the original screw's location and orientation

The Door Strike is an OEM replacement part for Whirlpool front-loading washing machines. It is the metal component integrated into the washer cabinet that securely receives and holds the washing machine door shut during cycles. 

Causes of a bad door strike can include normal wear over time. Excessive force on the door or damage to strike mechanics may compromise its integrity.

Symptoms of a failed door strike include:

• Gapping at the door seam permitting water leaks and reduced cleaning 
• Inability to fully latch closed for safety-certified operation
• Loose motion, impact damage, or misaligned connecting pieces  
• Recurring errors involving the door lock mechanism

This is the male piece to the door latch assembly on a front load washer. For the door latch assembly order WP8182634.

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore front-load washers.

The Boot Seal Retaining Ring is an OEM part for Whirlpool washing machines. This ring ensures the boot seal is securely fastened to the washing machine's door assembly. The boot seal retaining ring plays a key role in preventing water leaks by maintaining a tight seal between the door and the drum of the machine.

Over time, the retaining ring can lose its tension, become bent, or suffer from corrosion, leading to a compromised seal. 

Symptoms of a bad Boot Seal Retaining Ring include:

• Visible water leakage around the washer door
• Difficulty closing the washer door securely
• A visible gap or misalignment between the boot seal and the door frame
• The boot seal coming loose or falling off

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

For grey door frame use WP8182992.

Color: Pewter

Color: Grey. Includes outer window.

Front load washer door hinge.

This replacement screw secures appliance components and panels in their proper position. Replacing worn, stripped, or missing hardware restores a tight fit, reduces vibration or rattles, and helps maintain safe, reliable operation per the manufacturer's design. What it does:

• Fastens panels, brackets, or assemblies where specified in the model's parts diagram
• Replaces missing, rusted, or stripped hardware
• Helps eliminate looseness, rattling, or vibration
• Restores secure alignment of mounted components

• 1 screw

• Disconnect power and shut off water/gas before servicing.
• Verify the exact location in your model's parts diagram and replace screws one at a time to maintain alignment.
• Use the correct driver/bit; start threads by hand to avoid cross-threading and do not overtighten.
• Inspect mating holes/clips for damage; repair or replace related hardware if threads are compromised.

This replacement screw secures appliance components and panels so they stay aligned and rattle-free during operation. Replace stripped, missing, or corroded hardware to restore a tight fit and dependable performance. What it does

• Fastens brackets, panels, and internal sub-assemblies in the appliance
• Helps maintain alignment to reduce vibration and rattling
• Replaces missing, rusted, or stripped screws that no longer hold
• Useful when a part won't mount securely or a screw backs out during use

• One screw

• Disconnect power; for gas appliances, also shut off the gas supply
• Compare to the original for length and thread style for the location
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Do not overtighten; if the mounting hole or clip is worn, replace it

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement hose restores a secure, leak-free water path inside your appliance so it can move water where it's needed to fill, circulate, or drain correctly. Replacing a worn hose helps prevent leaks and related performance issues.

• Directs water between internal components as designed
• Maintains proper flow for filling, circulation, or draining
• Helps seal connections when correctly clamped and routed
• Common symptoms of a failed hose include leaks under the unit, slow or incomplete draining, erratic filling, or water-related error codes

• Disconnect power and shut off the water supply before servicing
• Note routing and orientation; replace one end at a time to match the original path
• Inspect and reuse OEM clamps if in good condition, or replace if corroded or weakened; fully seat all connections
• Run a brief test cycle and check all joints for leaks after installation

Upper left trim. Color: Blue.

Upper left trim. Color: Grey.

Color: Blue.

Color: Grey.

Color: Grey.

Color: Blue.

Color: Blue.

Note: No longer available in grey.

Color: Bisque. For light grey order WP8181846. For blue order 8181877. For dark grey order WP8182080. Fits front load Whirlpool/Kenmore made washers. Genuine Whirlpool part.

Color: Blue. For light grey order WP8181846. For dark grey order WP8182080 For bisque order 8182081. Fits front load Whirlpool/Kenmore made washers. Genuine Whirlpool part.

Dark grey used on pewter models. For light grey order WP8181846. For blue order 8181877. For bisque order 8182081. Fits front load Whirlpool/Kenmore made washers. Genuine Whirlpool part.

The Front Load Washer Door Handle is an OEM replacement part for Whirlpool washing machines. It is an essential component that allows users to easily open and close the washer door, facilitating the loading and unloading of laundry.

Symptoms of a need to replace the front load washer door handle:

• Handle becoming loose or detached from the door
• Cracks or breaks in the handle material
• Difficulty in opening or closing the door due to a faulty handle mechanism

Causes of a faulty front load washer door handle can include excessive force or mishandling, general wear and tear over time, or potential manufacturing defects.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore front load washing machine models.

Note: No longer available in grey.

Color: Blue.

This factory fastener secures appliance panels, brackets, and internal components so everything stays aligned and quiet. Replacing a missing or damaged screw restores a tight fit and helps reduce vibration, rattles, and wear.

• Fastens metal or plastic parts to the cabinet/frame
• Maintains alignment of covers, ducts, housings, and brackets
• Replace if the head is stripped, threads are worn, or hardware is missing
• Symptoms can include loose or misaligned panels, rattling/vibration noises, or parts that won't stay secured

• Disconnect power and shut off gas/water before service.
• Match the screw to the original location and reuse existing holes/mounts.
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening.
• Use the correct driver bit to prevent stripping the head.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.