Parts for Whirlpool GHW9460PL1: 02 - Door And Latch Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Flexible door bellow seal prevents water leaks between drum and door on front-load washers. Replace if torn, moldy, or leaking. Verify fit by model number.

Secures the door bellow seal to prevent leaks. Replace if damaged, rusted, or if the seal won't stay in place. Confirm fit with your model number.

Washer won't start or door won't latch? This door lock switch assembly detects if the door is closed. DIY-friendly repair with video guide included.

Factory mounting screw secures panels, brackets, hinges, and covers on your washer. Replace missing, stripped, or rusted screws to restore secure fit.

Fix DL error codes and doors that won't stay shut with this washer door strike. Works with the door lock assembly. Easy 30-minute DIY repair with video.

Secures the door boot seal to prevent water leaks in front-load washers. Replace if rusted, corroded, or fallen off. Confirm fit with your model number.

Support clamp secures washer components in place. Replace if broken, loose, or causing rattling noises. Verify fit with your model number before ordering.

Mounting screw for washer assembly. Secures internal components and panels. Replace if stripped, missing, or corroded during repairs or maintenance.

Color: Pewter

Color: Grey. Includes outer window.

Front load washer door hinge.

This replacement screw secures appliance components and panels in their proper position. Replacing worn, stripped, or missing hardware restores a tight fit, reduces vibration or rattles, and helps maintain safe, reliable operation per the manufacturer's design. What it does:

• Fastens panels, brackets, or assemblies where specified in the model's parts diagram
• Replaces missing, rusted, or stripped hardware
• Helps eliminate looseness, rattling, or vibration
• Restores secure alignment of mounted components

• 1 screw

• Disconnect power and shut off water/gas before servicing.
• Verify the exact location in your model's parts diagram and replace screws one at a time to maintain alignment.
• Use the correct driver/bit; start threads by hand to avoid cross-threading and do not overtighten.
• Inspect mating holes/clips for damage; repair or replace related hardware if threads are compromised.

This replacement screw secures appliance components and panels so they stay aligned and rattle-free during operation. Replace stripped, missing, or corroded hardware to restore a tight fit and dependable performance. What it does

• Fastens brackets, panels, and internal sub-assemblies in the appliance
• Helps maintain alignment to reduce vibration and rattling
• Replaces missing, rusted, or stripped screws that no longer hold
• Useful when a part won't mount securely or a screw backs out during use

• One screw

• Disconnect power; for gas appliances, also shut off the gas supply
• Compare to the original for length and thread style for the location
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Do not overtighten; if the mounting hole or clip is worn, replace it

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Connects detergent dispenser to wash tub for proper filling. Replace if cracked, leaking, or causing water pooling. Verify fit with your model number.

Upper left trim. Color: Grey.

Color: Grey.

Color: Grey.

Note: No longer available in grey.

Replacement door handle for front-load washers. Installs on the outer door assembly. Order a new handle if yours is cracked, broken, or pulled off.

Replacement door handle for front load washers. Installs on the outer door panel. Replace if cracked, broken, or loose from wear or excessive pulling.

This small retaining fastener locks an assembly, bracket, or panel in place inside your appliance. Replacing a damaged or missing clip helps stop rattles, keep parts aligned, and restore a secure fit.

• Secures a panel, bracket, trim piece, or harness to the appliance frame
• Helps prevent shifting and vibration during operation
• Common symptoms: loose or misaligned parts, rattling noises, or a clip that is cracked, bent, or missing
• Restores proper retention after service or when the original fastener wears out

What's included: 1 clip Install notes:

• Disconnect power before service; for water-using appliances, also shut off the water supply
• Note the original clip's orientation; take a photo before removal
• Use needle-nose pliers or a small flat screwdriver; avoid over-bending the clip
• Replace any additional damaged clips to ensure even retention

Note: No longer available in grey.

This factory fastener secures appliance panels, brackets, and internal components so everything stays aligned and quiet. Replacing a missing or damaged screw restores a tight fit and helps reduce vibration, rattles, and wear.

• Fastens metal or plastic parts to the cabinet/frame
• Maintains alignment of covers, ducts, housings, and brackets
• Replace if the head is stripped, threads are worn, or hardware is missing
• Symptoms can include loose or misaligned panels, rattling/vibration noises, or parts that won't stay secured

• Disconnect power and shut off gas/water before service.
• Match the screw to the original location and reuse existing holes/mounts.
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening.
• Use the correct driver bit to prevent stripping the head.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.