Parts for Gibson GRT17C2AW0: 03 - Door Parts

The Freezer Door Gasket is an OEM part for Frigidaire freezers. It is designed to create a secure seal around the perimeter of the freezer door, preventing cold air from escaping and warm air from entering. This seal is crucial for maintaining the freezer's efficiency and effectiveness in preserving food at optimal temperatures. It measures approximately 17-1/4 inches in height and 26-1/2 inches in width.

Symptoms of a bad Freezer Door Gasket include:

• Visible gaps or tears in the gasket,
• Condensation or ice buildup around the door area,
• The freezer struggling to maintain the set temperature,
• Increased energy consumption as the freezer works harder to compensate for air leaks.

Causes of gasket failure typically include normal wear and tear, exposure to extreme temperatures that can cause the material to harden and lose elasticity, or accidental damage from cleaning or use.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Fresh Food Door Gasket is an OEM replacement part for Frigidaire refrigerators. This component forms a critical seal between the refrigerator door and cabinet, helping to maintain the desired temperature and prevent cool air from escaping.

Symptoms of a failing fresh food door gasket may include:

• Difficulty closing the refrigerator door properly
• Warm air entering the fresh food compartment
•  Increased energy consumption due to loss of cooling efficiency

Causes of needing to replace the fresh food door gasket can include normal wear and tear over time, physical damage or tears in the gasket material, or improper door alignment preventing a tight seal.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models. 

The Door Rack is an OEM part for Frigidaire refrigerators. This component provides additional storage on the refrigerator door, allowing for convenient organization of bottles, jars, and other small items. This white door bar measures approximately 20.27 inches.

Causes of a bad door rack can include cracking or breaking due to heavy items being stored on it, wear and tear from frequent use, or damage from impacts or mishandling. Exposure to extreme temperature changes can also weaken the plastic over time.

Symptoms of a bad door rack include:

• The rack falling off or not staying securely in place
• Visible cracks or damage to the rack
• Difficulty in attaching the rack to the door
• Items not being held securely and falling out when the door is opened

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Rack Support is an OEM part for Frigidaire refrigerators. It is designed to support the door rack or bin, providing a secure mounting point that helps hold items in place within the refrigerator door. This support piece ensures that the door racks remain stable, allowing you to store and organize items like bottles, jars, and condiments efficiently.

Causes of a bad door rack support can include regular wear and tear from frequent use, overloading the door racks with heavy items, or accidental damage from impacts or mishandling. Over time, these factors can cause the support to crack, break, or lose its ability to hold the door rack securely.

Symptoms of a bad door rack support include:

• Door racks sagging or falling out of place
• Difficulty in fitting or securing the door racks
• Visible cracks, breaks, or damage to the support

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Refrigerator Door Rack Support is an OEM replacement part for Frigidaire refrigerators. This component provides structural reinforcement and stability for the racks or shelves mounted on the interior of the refrigerator door.

Symptoms of needing to replace the door rack support include:

• Sagging or unstable door racks
• Difficulty in removing or inserting the racks
• Visible cracks, damage, or deformation of the support

Causes of a faulty door rack support can include accidental impact or mishandling, excessive weight or stress on the racks, or general wear and tear over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

The Door Rack Support is an OEM replacement part for Frigidaire refrigerators. It serves as the mounting bracket or structure that holds and secures the door racks or bins in place on the inside of the refrigerator door.

Symptoms of a need to replace the door rack support:

• Loose or wobbly door racks or bins
• Racks or bins falling off the door when opened
• Visible cracks, breaks, or damage to the support structure

Causes of a faulty door rack support can include general wear and tear over time, physical impact or mishandling, or manufacturing defects in the material or construction.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

The Refrigerator Door Rack Support is an OEM replacement part for Frigidaire refrigerators. It is a crucial component that provides structural support and stability for the door racks or bins, ensuring they remain securely in place even when loaded with items.

Symptoms of a bad refrigerator door rack support include:

• Door racks or bins becoming loose or unstable
• Racks or bins not aligning properly when the door is closed
• Items falling off the racks due to lack of support

Causes of a bad door rack support can range from physical damage due to impact or excessive force to general wear and tear over time, which can weaken or deform the support.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

For the right-hand side order 240311502.

The Dairy Door is an OEM replacement part for  Frigidaire side-by-side refrigerators. Located inside the fresh food compartment, it provides a dedicated storage area for milk, yogurt, cheese and other dairy products requiring colder temperatures. The door measures approximately 9 inches wide and 5 inches high.

Causes of a bad dairy door include normal wear from repeated opening and closing over time. Exposure to spills inside the refrigerator can also potentially damage door shelf components or seals.

Symptoms of a bad dairy door are: 

• Difficulty opening or closing the door smoothly  
• Door alignment issues where it does not sit flush in the frame
• Leaks or moisture inside the dairy storage area
• Damage or cracks in shelf supports or gasket seals

This OEM part is also compatible with models from brands like Electrolux, Gibson, and Kelvinator brand models.

NOTE: For white use 240337701

The Door Rack is an OEM part for Frigidaire refrigerators. This component provides additional storage on the refrigerator door, allowing for convenient organization of bottles, jars, and other small items. This white door bar measures approximately 20.27 inches.

Causes of a bad door rack can include cracking or breaking due to heavy items being stored on it, wear and tear from frequent use, or damage from impacts or mishandling. Exposure to extreme temperature changes can also weaken the plastic over time.

Symptoms of a bad door rack include:

• The rack falling off or not staying securely in place
• Visible cracks or damage to the rack
• Difficulty in attaching the rack to the door
• Items not being held securely and falling out when the door is opened

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Color: White. Used to cover the hinge bearing hole.

Color: White. Includes outer and inner panel

This door stop limits the refrigerator door's opening range to protect hinges and nearby cabinets. Replace a cracked or missing stop to restore smooth, controlled door movement and help the door close and seal properly.

• Limits door swing to prevent overextension and impact with walls or cabinets
• Reduces hinge stress and helps maintain proper door alignment
• Common signs of failure: door opens too far, binds at the hinge, or the original stop is cracked/missing
• Restores smooth, controlled door motion and closure

• Disconnect power and remove items from the door to reduce weight
• Support the door before loosening any hinge fasteners
• Install the new stop in the correct orientation for your model
• Adjust hinges if needed

This door stop limits the opening angle of the refrigerator/freezer door to prevent overextension that can stress hinges or strike nearby cabinets. Replacing a worn or missing stop restores controlled door travel and helps prevent impact damage.

• Controls and limits the door's opening range
• Helps protect hinges, gaskets, and adjacent cabinets from overextension
• Restores smooth, consistent door operation
• Common signs: door swings past normal position, door hits wall/cabinet, visible broken or missing stop

• Unplug the appliance and lighten the door if needed for easier handling
• Support the door; remove hinge fasteners or pin as needed to access the stop
• Match the orientation of the original stop; retain any shims/spacers in the same order
• Reassemble and verify door alignment and gasket seal

Color: White

The Screw is an OEM replacement part for Frigidaire refrigerators. This small but essential component is used to secure various parts of the appliance, such as panels, brackets, or internal fixtures, ensuring the refrigerator's structural integrity and proper operation.

Over time, screws may become loose, stripped, or corroded due to regular use, environmental factors, or maintenance work. A damaged or missing screw can lead to misaligned parts or reduced stability of the appliance.

Symptoms of a bad or missing screw include:

• Loose or wobbly components within the refrigerator
• Panels or fixtures coming apart or misaligned
• Difficulty securing parts during maintenance or repair
• Rattling or unusual noises during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

The Hinge Bearing is an OEM part for Frigidaire refrigerators. It plays a critical role in the smooth operation of the refrigerator door by providing a pivot point for the hinge. This small component helps to ensure that the door opens and closes smoothly and seals properly, which is essential for maintaining the refrigerator's internal temperature and energy efficiency.

Symptoms of a bad Hinge Bearing include:

• Difficulty in opening or closing the refrigerator door.
• Squeaking or grinding noises when the door moves.
• The door hanging unevenly or not sealing correctly, potentially leading to temperature fluctuations inside the fridge.

Causes of a bad hinge bearing can include wear and tear from the frequent use of the refrigerator door, accumulation of dirt or grime that impedes smooth movement, or degradation of the material over time due to environmental factors such as moisture.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Handle Mounting Block is an OEM part for Frigidaire refrigerators. This component anchors the refrigerator door handle assembly while also reinforcing the door structure.

Causes of a bad mounting block can include cracks developing from repeated opening/closing stresses, broken fasteners loosening its installation, or residual damage during door replacement or repair attempts.

Symptoms of a bad handle mounting block include:

• Loose, sagging or misaligned door handles
• Doors difficult to open or not staying securely closed/latched
• Noisy rattling coming from the door handle area
• Cracks or breaks visible in the mounting plastic

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Specs: 10-16 X 0.500

Color: White