Parts for Whirlpool WFE540H0AE0: 05 - Door Parts

Color: Black

The Vent Trim is an OEM part for Whirlpool ranges. This is a decorative and protective cover that surrounds the vent or exhaust opening, enhancing the overall aesthetic appearance while also preventing accidental access to the vent area.

Causes of a bad Vent Trim include physical damage from impact or mishandling, exposure to excessive heat or moisture, and general wear and tear over time, leading to discoloration, warping, or deterioration of the trim material.

Symptoms of a bad part include:

• Visible cracks, dents, or deformities in the trim
• Discoloration or fading of the trim's finish
• Loose or improperly fitting trim, allowing potential access to the vent area

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: Grey

This replacement screw with a 10-16 thread secures panels, brackets, and other components in your appliance. Restoring the correct hardware keeps parts tight and aligned, reducing vibration and preventing loosening over time.

• Secures sheet-metal panels, brackets, and assemblies
• Replaces missing, stripped, or corroded fasteners
• Helps eliminate rattling or vibration from loose hardware
• Maintains proper alignment for reliable performance

• Disconnect power; turn off the water supply before servicing
• Use the correct driver/bit and start threads by hand to avoid cross-threading
• Tighten snugly; do not overtighten into sheet metal or plastic
• Reinstall in the original location and orientation

Color: White

The Door Handle is an OEM replacement part for Whirlpool electric ranges. This black door handle is ergonomically designed for the comfortable and safe opening of the range door.

Causes of a bad handle can include normal wear and tear from repeated use over time, accidental damage from forced pulling or impacts, or breakdown of internal mounting components. 

Symptoms of a failed handle include:

• Loose or unstable mounting allowing the handle to detach 
• Cracks or breaks in the plastic rendering it unusable
• Difficulty opening the door smoothly 

This OEM handle is also compatible with Maytag, KitchenAid, Jenn-Air, and  Magic Chef electric ranges.

This inner oven door liner replaces the damaged or warped inner panel that supports the oven door glass and helps contain heat inside the oven cavity. It restores a solid mounting surface for door glass and internal components. What it does:

• Provides the inner structural panel for the oven door and supports the door glass and insulation.
• Helps maintain proper oven heat containment to support uniform cooking.
• Prevents direct exposure of insulation and internal parts to oven cavity heat and food debris.
• Addresses symptoms like visible cracks, warping, or detached glass mounting points on the inside of the door.

• Disconnect power before starting any repair and follow manufacturer's safety instructions.
• Remove the oven door per the appliance manual to access and replace the inner liner; handle glass and sharp edges carefully.
• Keep all original screws and mounting clips; confirm screw locations during disassembly to ensure proper reassembly.
• If the door has multiple glass panels or seals, verify placement during reassembly—do not force parts into position.

This factory fastener secures appliance panels, brackets, and internal components. Replacing a missing, stripped, or corroded screw restores proper fit and stability, helping reduce vibration, rattling, and wear during everyday operation.

• Secures covers, brackets, and assemblies to the cabinet or frame
• Restores alignment to reduce gaps, looseness, and vibration
• Replaces lost, damaged, corroded, or stripped hardware
• Matches the original fastener for correct fit and retention

• Disconnect power and shut off water or gas before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Tighten snugly—do not overtighten to prevent thread or plastic damage
• Inspect receiving threads or clips; repair/replace if stripped or broken

This inner door glass is the heat-resistant panel mounted on the inside of the oven door. It restores a clear, secure barrier to help retain heat and visibility when the original glass is cracked, shattered, or stained.

• Forms the inner pane of the oven door to contain heat and allow viewing of food
• Damage can cause heat loss, longer preheat/cook times, and unsafe sharp edges
• Cracked, shattered, or missing glass should be replaced before using the appliance
• Cloudy or permanently stained glass reduces visibility into the oven

• Disconnect power at the breaker and allow the oven to cool completely
• Wear cut-resistant gloves and eye protection; handle glass carefully
• Support or remove the door and work face-down on a padded surface
• Transfer any brackets/clips/insulation as configured; do not overtighten fasteners against the glass

The Door Hinge is an OEM part for Whirlpool ovens. This hinge is crucial for supporting the oven door, allowing it to open and close smoothly. It ensures the door remains securely in place during cooking and baking.

Over time, oven door hinges can wear out or become damaged due to frequent use and exposure to high temperatures. Common causes of a bad hinge include metal fatigue, rust or corrosion, and accidental damage from slamming the oven door.

Symptoms of a bad hinge include:

• Difficulty opening or closing the oven door
• The oven door not staying securely closed
• A misaligned or sagging oven door
• Noises or squeaks when the door is operated

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This outer door glass replaces the exterior oven/range door panel to restore a clear viewing window and the door's finished appearance. It helps protect the inner door assembly and keeps heat contained for efficient operation. What it does:

• Serves as the outermost glass panel on the oven/range door and provides a viewing window into the oven cavity.
• Protects inner door components and inner glass from impacts and scratches.
• Commonly replaced when the glass is cracked, chipped, shattered, or cosmetically damaged.
• Restores proper door fit and appearance that can affect heat retention and cooking performance.

• Disconnect power and ensure the oven is completely cool before beginning work.
• Handle glass carefully; wear cut-resistant gloves and eye protection.
• Replacement typically requires removing the door and detaching trim/fasteners—follow the OEM service instructions for your model.
• If inner glass or seals are damaged, inspect and replace those parts as needed.

This inner oven door glass replaces a cracked or broken panel to restore the oven door's barrier and improve visibility. It fits into the door assembly to help contain heat and let you check cooking progress safely. What it does:

• Replaces damaged or cracked inner oven door glass to prevent heat loss and safety hazards
• Restores clear viewing of the oven cavity for monitoring food without opening the door
• Helps maintain proper oven temperature by resealing the door assembly when installed correctly
• Suitable when the existing glass is chipped, shattered, or otherwise compromised

• One inner oven door glass panel

• Disconnect power to the range or oven before starting any repair (unplug or switch off circuit breaker)
• Handle glass with heavy-duty gloves and eye protection to avoid cuts from sharp edges
• Removal typically requires opening the oven door and removing door trim/fasteners; keep track of screws and any clips

This outer door glass replaces the damaged exterior glass on the appliance door to restore appearance and protect inner door components. Fits as the outer-facing glass panel used when the original glass is cracked, chipped, or clouded. What it does:

• Serves as the exterior glass panel on the appliance door, forming the visible outer surface.
• Protects the inner door liner, wiring, and controls from direct contact and debris.
• Restores the door's finished look when the original glass is scratched, cracked, or discolored.
• Allows safe viewing of the appliance interior where applicable without exposing internal parts.
• Prevents sharp edges and loose glass that can create a hazard.

• Disconnect power (and water, for washers) before beginning any repair; use proper lockout/tagout procedures.
• Handle glass with cut-resistant gloves and eye protection to avoid injury from broken or sharp edges.
• Removal typically requires detaching the door assembly and removing trim/retainers; keep track of screws and clips.
• Follow the appliance's service manual or OEM diagram for model-specific steps.

This door trim is the front-facing decorative bezel that restores the finish and edge protection to your appliance door. It replaces a worn, cracked, or damaged trim to improve appearance and help seal the door edge. What it does

• Replaces damaged or cracked door bezel to restore appearance
• Covers and protects the door edge from impacts and wear
• Helps maintain a clean seal line by securing the door edge trim
• Common symptom: visible cracks, chips, or loose trim along the door perimeter

• One door trim piece as shown

• Disconnect power to the appliance before beginning any service
• Use appropriate tools and keep fasteners for reassembly; handle trim carefully to avoid damage

This outer door trim restores the finished appearance of an appliance door and covers the edge gap between the door panel and console for a clean, factory look. It helps protect the door edge from everyday wear. What it does:

• Covers and finishes the outer edge of the appliance door for a seamless appearance
• Helps prevent dirt and moisture from collecting at the door edge
• Restores cosmetic damage like scratches, dings or missing trim pieces
• Useful when replacing a cracked, warped or broken door trim piece

• High-level replacement only; remove and reinstall the outer door panel to access the trim
• Use appropriate screwdrivers and keep fasteners organized for reassembly
• Disconnect power (or gas) and follow manufacturer's safety steps before beginning service
• If trim is clipped in, carefully release retaining clips to avoid breaking adjacent parts

Size: 8-18 x 1/2 inch.

The Range Bracket-Glass is an OEM part for Whirlpool ranges. It is designed to support and secure the glass surface or cooktop in place, ensuring stability during operation. This bracket is essential for maintaining the proper alignment and positioning of the glass panel.

Causes of a damaged bracket can include repeated exposure to heat and stress during cooking, accidental impacts, or improper installation. Over time, the material may weaken, crack, or warp, compromising its ability to hold the glass securely.

Symptoms of a bad bracket include:

• Loose or wobbly glass cooktop
• Visible cracks or damage to the bracket
• Gaps between the glass and the frame
• Difficulty securing the glass properly during reassembly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Range Bracket-Glass (White) is an OEM part for Whirlpool ranges. It is designed to support and secure the glass surface or cooktop in place, ensuring stability during operation. This bracket is essential for maintaining the proper alignment and positioning of the glass panel.

Causes of a damaged bracket can include repeated exposure to heat and stress during cooking, accidental impacts, or improper installation. Over time, the material may weaken, crack, or warp, compromising its ability to hold the glass securely.

Symptoms of a bad bracket include:

• Loose or wobbly glass cooktop
• Visible cracks or damage to the bracket
• Gaps between the glass and the frame
• Difficulty securing the glass properly during reassembly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Screw is an OEM part for Whirlpool ranges. This screw is used to secure various components within the range, ensuring that parts such as panels, control boards, or burners are firmly attached and remain stable during operation.  

Causes of a bad range screw can include regular wear and tear, over-tightening, or exposure to high heat.  

Symptoms of a bad range screw include:

• Loose or unstable components within the range
• Difficulty in securing parts during maintenance or repair
• Visible damage or wear on the screw
• Parts becoming misaligned or rattling during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement screw with a 10-16 thread secures panels, brackets, and other components in your appliance. Restoring the correct hardware keeps parts tight and aligned, reducing vibration and preventing loosening over time.

• Secures sheet-metal panels, brackets, and assemblies
• Replaces missing, stripped, or corroded fasteners
• Helps eliminate rattling or vibration from loose hardware
• Maintains proper alignment for reliable performance

• Disconnect power; turn off the water supply before servicing
• Use the correct driver/bit and start threads by hand to avoid cross-threading
• Tighten snugly; do not overtighten into sheet metal or plastic
• Reinstall in the original location and orientation

This Door Glass is the OEM replacement glass panel for the appliance door, restoring a clean appearance and protecting interior components. It replaces damaged, cracked, or scratched door glass so the door looks and functions like new. What it does:

• Replaces broken, cracked, or chipped door glass to restore safety and appearance
• Provides a protective barrier for internal components and insulation
• Helps maintain proper visibility through the door
• Restores a finished exterior surface for easy cleaning

• Disconnect power to the appliance before beginning any repairs
• Handle glass carefully and wear cut-resistant gloves and eye protection
• May require partial or full door disassembly—keep track of fasteners and hardware

This handle standoff spacer positions and secures a refrigerator/freezer door handle, keeping the handle correctly spaced from the door for smooth operation and a finished appearance. It's a small replacement part that restores proper handle fit. What it does:

• Creates a stable gap between the handle and the door so the handle mounts flush and operates without binding
• Keeps the handle aligned to prevent wobbling or loosening over time
• Restores original handle clearance after wear or damage to the existing spacer
• Useful when a broken, cracked, or missing spacer causes handle play or misalignment

• One handle standoff spacer

• Turn off power to any powered appliance components and remove items from the door or work area before starting
• Typical installation requires removing the handle fasteners, replacing the spacer, then reinstalling and torquing fasteners evenly
• Use appropriate hand tools and avoid over-tightening fasteners to prevent cracking the spacer

This spacer maintains the designed clearance between parts in your appliance, keeping components aligned for smooth, quiet operation. Replacing a worn or missing spacer helps prevent rubbing, binding, and premature wear in the affected assembly.

• Maintains the correct gap and alignment within the assembly
• Reduces friction, noise, and wear between adjacent parts
• Helps components seat and move smoothly as designed
• Typical symptoms include scraping noises, looseness or wobble, misalignment, or visible spacer damage

• Disconnect power (and water supply, if applicable) before servicing
• Refer to your model's parts diagram to determine the spacer's location, orientation, and stack order
• Reuse existing hardware (washers, clips, screws) as required by your model
• Tighten fasteners snugly without deforming the spacer; verify smooth movement before full reassembly

The Door Handle End Cap is an OEM part for Whirlpool ranges. This part attaches to the end of the oven door handle, securing it in place and providing a finished look. It helps ensure the handle remains firmly attached to the door, allowing for easy opening and closing of the oven.

Causes of a bad door handle end cap can include frequent use, accidental impacts, or degradation of materials over time.

Symptoms of a bad door handle end cap include:

• Loose or wobbly oven door handle
• Cracks or breaks in the end cap
• Difficulty opening or closing the oven door
• Visible damage to the end cap

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This support bracket secures internal components to the appliance chassis, restoring proper alignment and stability for attached parts. It's a simple replacement that helps stop rattling and prevents components from shifting during use. What it does:

• Provides a secure mounting point to hold panels, assemblies or components in place
• Helps eliminate vibration or rattling caused by a loose or broken bracket
• Restores proper alignment so connected parts operate correctly
• Prevents further wear or damage from loose components

• Disconnect power to the appliance before starting any repair
• Basic hand tools (screwdriver, nut driver) are typically required
• Keep original fasteners and note their location for reassembly; replace damaged hardware as needed

This mounting bracket secures internal or external appliance components to the cabinet, restoring proper alignment and preventing vibration. It's a small but critical metal support used where fasteners attach panels or assemblies. What it does:

• Provides a secure attachment point for panels, controls, or assemblies
• Prevents loosening, rattling, and misalignment caused by broken or missing supports
• Restores proper fit and function when original bracket is bent, cracked, or missing
• Works as a direct replacement using existing fasteners and mounting holes

• Disconnect power (and gas if applicable) before beginning any repair
• Installation typically requires basic hand tools (screwdriver, nut driver, or socket)
• Retain or reuse original screws; verify bracket orientation before tightening
• If metal edges are sharp, use care and protective gloves to avoid cuts

Color: Grey

Color: Grey

Color: Stainless)