Parts for Kenmore 253.31420102 (25331420102, 253 31420102): Doors Parts

Seals the freezer door to prevent cold air loss and frost buildup. Replace when torn, hardened, or not sealing properly. Confirm fit by model number.

The Gasket, Fresh Food Door is an OEM part for Frigidaire refrigerators. It is essential for creating a tight seal around the door of the refrigerator's fresh food compartment, preventing warm air from entering and cold air from escaping. This seal helps maintain the internal temperature, ensuring food stays fresh longer and the refrigerator operates efficiently. The gasket measures approximately 37 inches in length and 29 inches in width. 

Symptoms of a bad Fresh Food Door Gasket include:

• Condensation or frost buildup inside the refrigerator,
• The refrigerator running more frequently or for longer periods,
• Difficulty maintaining consistent temperatures in the fresh food compartment.

Causes of gasket failure can include normal wear and tear, exposure to harsh cleaning chemicals that degrade the material, or damage from frequent use.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Door shelf bar mounts inside your refrigerator door to hold and organize items. Replace this rail if cracked, broken, or missing from daily use.

Replacement door shelf bar for refrigerator doors. Snaps into place to hold bottles, jars, and condiments securely. Needed when original is cracked or broken.

The Door Rack is an OEM part compatible with Frigidaire refrigerators. It is a convenient storage component designed to fit securely inside the refrigerator door, providing additional space for organizing and storing items.This rack is white in color and measures about 23 inches wide by 3 inches high by 5 inches deep. 

Causes of needing to replace a door rack can include damage from mishandling or impact, wear and tear over time, or the desire to upgrade or customize the interior organization of the refrigerator.

Symptoms indicating it's time for a new door rack include:

• Cracks, breaks, or visible damage to the rack or shelves
• Difficulty in sliding or removing the rack from the door
• Inability to securely hold or support items placed on the rack

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

White dairy compartment door cover for refrigerators. Replaces cracked, broken, or missing dairy tray doors. Snaps into place on the refrigerator door.

Replace a cracked, broken, or missing door rack in your refrigerator. Snaps into place on the door to hold bottles, jars, and condiments securely.

Bisque plug insert for refrigerator door hinge bearing hole. Replaces missing, cracked, or damaged plugs. Covers hinge pin opening for clean finish.

This small white plastic plug covers an unused hinge bearing hole on the refrigerator door, typically left open when the door is configured to swing in one direction. It provides a clean, finished look and prevents moisture or debris from entering the hole. Replace this plug if it is missing, cracked, or yellowed, restoring the door's appearance.

This complete white freezer door panel restores the exterior finish and protective outer surface of the freezer door. It replaces a cracked, dented or faded outer panel to improve appearance and protect underlying components. What it does:

• Replaces the outer freezer door skin to restore the door's finished look
• Shields insulation and internal door components from damage and moisture
• Helps prevent cold air leaks caused by damaged exterior paneling
• Restores correct mounting surface for handles and trim

• Basic disassembly of the freezer door is required; follow for step-by-step instructions
• Use proper tools and support the door to prevent drops or damage during removal/installation
• Disconnect power to the appliance before working on the door to avoid electrical or compressor-related hazards
• Take care to avoid scratching or denting the new panel during installation; handle with soft gloves or a protective cloth

This replacement nameplate insert restores the control-panel trim and appearance on compatible Frigidaire appliances. It provides a clean, finished surface around buttons and displays to improve usability and appliance aesthetics. What it does:

• Replaces a cracked, faded, or missing control-panel nameplate for a like-new look
• Restores labeled areas and trim around buttons and touch controls for clearer operation
• Helps protect underlying control components from dirt and wear
• Addresses cosmetic damage and improves resale or staging appearance

• One nameplate insert as shown

• Intended as a direct-fit cosmetic replacement;
• Remove power to the appliance before accessing the control panel to avoid shock or accidentally activating controls
• Handle trim carefully to avoid scratching the finish; use appropriate trim tools to release clips or fasteners
• If adhesive or clips are damaged, replace only with OEM-specified fasteners or adhesive

This replacement door stop helps keep a refrigerator door from swinging past its intended range, protecting the hinge and cabinet. Fits at the door hinge area to restore correct stopping and smooth door motion. What it does:

• Limits door travel to prevent over-rotation and cabinet damage
• Helps maintain proper door alignment for a secure seal
• Stops excessive force that can stress hinges or cause the door to come off
• Commonly replaced when the door no longer stops or binds during opening/closing

• One door stop

• Unplug the appliance or disconnect power before beginning any repairs
• Access may require opening the hinge cover or removing the door
• Use appropriate tools and avoid overtightening fasteners to prevent damage

Replaces a broken or worn refrigerator door stop that limits door travel. Prevents over-rotation damage to hinges and cabinet. Restores smooth closing.

Limits refrigerator door swing to prevent overextension and protect hinges. Replace if cracked, broken, or missing to restore controlled door movement.

Limits door opening angle to prevent overextension and cabinet strikes. Replace if worn, broken, or missing to restore controlled door travel.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Refrigerator door hinge bearing provides smooth pivot action for proper door operation. Replace if door sags, sticks, or pops open. Confirm fit with your model number.

This replacement egg tray restores organized egg storage in your refrigerator door or shelf area so eggs stay upright and easy to access. Durable molded plastic replaces cracked or missing trays to help keep eggs contained. What it does:

• Holds and secures eggs to prevent rolling and tipping
• Restores a missing or damaged egg storage area in the fridge
• Helps reduce mess from cracked or loose eggs
• Fits into the refrigerator door or designated shelf location

• Simply remove the old tray and snap the new tray into the existing mounting location
• No tools required for most installations; handle gently to avoid cracking the tray
• Clean with mild detergent before first use
• Keep away from high-heat sources and avoid harsh chemicals