Parts for Husqvarna YTH2148 (LO21H48A): Drive Parts

This part is a replacement foot rest pad. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn or defective foot rest pad in a variety of lawn tractor models. This particular pad is intended for the left side.The foot rest pad ensures the user has a comfortable, non-slip surface on which to rest their foot. This part is subject to wear and tear and will require replacement with a genuine OEM part if worn, detached, or no longer effective. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to place this wheel, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this foot rest pad is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This footrest pad is a righthand footrest pad and is a genuine Husqvarna part. It is made as a replacement part for lawn tractors. The footrest pad is the part of the mower on which the right foot sits while the machine is being used. It is also sometimes used as a pedal.To replace the footrest pad, simply remove the old one and attach this replacement part. No further disassembly of the tractor is required, so it is a relatively simple repair. However, before replacing the footrest pad, be sure to take proper safety precautions such as disconnecting the spark plug, emptying the fuel tank, and allowing the engine to cool completely.This footrest pad is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. Please note that it is not compatible with the left side of the tractor. It is compatible with tractors made by Craftsman, Husqvarna, and Poulan. It replaces obsolete part # 165799X428.

This genuine OEM part is an anti-rotation bracket for lawnmowers. The anti-rotation bracket keeps the blades from rotating incorrectly and allows them to perform their essential functions. Over time, an anti-rotation bracket can deteriorate due to excessive wear and tear. Luckily, replacing this bracket is a relatively easy process.To replace the bracket, remove the mower deck cover and locate the bracket. Pull the bracket out of its place, and reinstall the new bracket by sliding it into its correct position. Reinstall the mower deck cover, and secure it properly. This replacement part is compatible with Husqvarna brand riding lawnmowers.

This flat idler pulley is designed for use with outdoor lawn and garden power equipment, specifically for many different models of lawn tractors and riding mowers. It is compatible with products from brands such as Craftsman, Husqvarna, Poulan, Murray, Ariens, and Troy-Bilt. The flat idler pulley part is crucial for the proper functioning of the lawn mower because it connects to the idler bracket. The purpose of the flat idler pulley is to apply tension to the v-belt. The replacement or repair process of the flat idler pulley will require a moderate amount of savvy. A wrench would be very helpful for the installation process.This flat idler composite pulley is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. This flat idler pulley is made out of metal.

Ground drive V-belts are most commonly used on riding lawn mowers and garden tractors. This component connects the transaxle pulley to the engine crankshaft in order to drive the rear wheels. It's possible for this V-belt to break, become worn, or get stretched out to the point where the lawn mower will no longer run. A visual inspection will give an indication of whether the V-belt has issues and needs to be replaced. The first thing that needs to be done is disconnecting the spark plug when replacing the V-belt. Wear work gloves through the process of removing the mower deck and taking off the ground drive belt. Once the original V-belt is gone, the new one can be installed over the transaxle pulley and the mower deck can be placed back on. After reconnecting the spark plug and adding fuel to the V-belt, the lawn mower will be ready for use. This is a genuine OEM replacement component that comes straight from the manufacturer. It is made for use with Husqvarna, Ryobi, Poulan, Weed Eater, Jonsered, and Craftsman lawn mowers. This V-belt is sold individually and will need a screwdriver and wrench for its installation.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This screw is a common piece of hardware and serves as a replacement for those that are lost, damaged, or missing. It can be used for a range of machines, but it is typically used with lawnmowers and tractors as a means to fasten elements together and to reduce vibration.Although screws are meant to last, they can wear down and break over time. They may also become corroded from the elements. When repairing the machine, there is also the risk that the screws may be lost. Regardless of the problem with the screw, it will need to be replaced before the machine can be operated. The process is usually straightforward, but this can vary based on the location of the screw.The screws can be used with many models of lawn mowers and tractors from Husqvarna, Poulan, Ryobi, Weed Eater, and Jonsered. This is a genuine OEM replacement part sourced from the manufacturer. The screw is sold individually.