Parts for Husqvarna YTH2148 (LO21H48A): Steering Assembly Parts

This part is a replacement foot rest pad. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn or defective foot rest pad in a variety of lawn tractor models. This particular pad is intended for the left side.The foot rest pad ensures the user has a comfortable, non-slip surface on which to rest their foot. This part is subject to wear and tear and will require replacement with a genuine OEM part if worn, detached, or no longer effective. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to place this wheel, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this foot rest pad is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This footrest pad is a righthand footrest pad and is a genuine Husqvarna part. It is made as a replacement part for lawn tractors. The footrest pad is the part of the mower on which the right foot sits while the machine is being used. It is also sometimes used as a pedal.To replace the footrest pad, simply remove the old one and attach this replacement part. No further disassembly of the tractor is required, so it is a relatively simple repair. However, before replacing the footrest pad, be sure to take proper safety precautions such as disconnecting the spark plug, emptying the fuel tank, and allowing the engine to cool completely.This footrest pad is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. Please note that it is not compatible with the left side of the tractor. It is compatible with tractors made by Craftsman, Husqvarna, and Poulan. It replaces obsolete part # 165799X428.

This part is a tire spindle assembly that is used on lawnmowers. The tire spindles are an essential part of the lawn mower cutting deck because they help mow evenly.A new tire spindle assembly may be needed if any of the components are cracked, broken, or damaged in any way. The tire spindle assembly may need to be replaced periodically after normal wear and tear over time. The tire spindle assembly could become damaged if it experiences a direct collision impact with a hard object or surface such as a rock or landscaping block. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This tire spindle assembly is a genuine Husqvarna part. It is sold individually. The specific tine spindle assembly is compatible with lawnmowers that are manufactured by Husqvarna.

This right spindle assembly is a genuine Husqvarna part, sold individually. This right spindle assembly can be used as a replacement part for a lawn mower. The purpose of the right spindle assembly is to supply all of the necessary components to replace a right spindle. The right spindle makes linear motion possible after converting the rotational motion generated by the v-belt.The right spindle could be punctured, torn, or eroded from general wear and tear from long-term usage or from a direct impact with a hard object, such as a rock or a curb. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This right spindle assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, and Ariens.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This screw is a common piece of hardware and serves as a replacement for those that are lost, damaged, or missing. It can be used for a range of machines, but it is typically used with lawnmowers and tractors as a means to fasten elements together and to reduce vibration.Although screws are meant to last, they can wear down and break over time. They may also become corroded from the elements. When repairing the machine, there is also the risk that the screws may be lost. Regardless of the problem with the screw, it will need to be replaced before the machine can be operated. The process is usually straightforward, but this can vary based on the location of the screw.The screws can be used with many models of lawn mowers and tractors from Husqvarna, Poulan, Ryobi, Weed Eater, and Jonsered. This is a genuine OEM replacement part sourced from the manufacturer. The screw is sold individually.

This genuine Husqvarna replacement part is a steering bushing kit for use with lawn tractors and riding lawn mowers. A properly functioning steering bushing is essential for the safe and reliable use of a lawn tractor or riding mower. The steering bushing holds the steering wheel shaft on the steering boot. The steering bushing may become worn out or damaged with extended use, necessitating replacement. Remember to check the steering bushing periodically to spot any wear or damage. This part is an identical replacement for a steering bushing that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. A screwdriver is required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is made of durable material, and includes the bushing and two screws. Please note: original part numbers 1554J, 532155105, 155105 and 532124720 are now obsolete, and manufacturer has replaced the original part numbers with this part.

This metal crownlock nut is found in a range of different types of lawn and garden equipment. The nut is often used to help connect and secure the link on the suspension arm. However, it could be used for different purposes depending on the machine. The crownlock nut may need to be replaced for any number of reasons. In some cases, it could have become corroded and no longer provides a secure connection. It could have also become lost. Regardless, users need to have a replacement to ensure their machine is running properly and that running the machine is safe. This is a genuine OEM replacement crownlock nut and it is sold individually. The nut is commonly used with lawn tractors, lawn mowers, and tillers. Compatible brands include Husqvarna and Craftsman. Buyers should note that there are often many different types of nuts in these machines. They need to be sure they are choosing the right one for their needs and their make and model.

This spacer is a genuine Husqvarna part, sold individually. This spacer can be used as a replacement part in a lawn mower. The purpose of the spacer in a lawn mower is to function within a fastening component, such as a washer, screw, bolt, or nut, in order to reduce friction between components as well as to allow room within the infrastructure of the appliance for components to shift and move around without detaching.The spacer in a lawn mower might need to be replaced if the small component is lost, misplaced, or damaged over time. Additionally, the spacer can fall out and be lost over the typical use of the lawn mower. If this occurs, the spacer should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spacer is compatible with the following outdoor brands: Husqvarna, Craftsman, McCulloch, Poulan, Flymo, and Weed Eater.

This genuine OEM replacement washer is a specially hardened washer to provide more support for a wide range of different lawn appliances. Washers are usually used in conjunction with a nut and a bolt and act as a barrier between those two parts. Washers help to redistribute pressure to prevent the bolt from giving out over time, as well as to provide a stronger grip. Washers can begin to corrode over time, and when this happens, the washer can fuse together with the bolt or nut. This would make the connection difficult to disengage in the case of a bigger repair. It is good practice, then, to replace washers anytime the nut or bolt is also replaced. This way, all parts age at the same rate and will not have to be individually changed out. Use a wrench to unthread the nut and change out a washer. This part is a top of the line replacement washer for a Husqvarna, Weed Eater, Ryobi, Jonsered, or Poulan engine. It comes sourced from the original manufacturer and does not include any other hardware.