Parts for Husqvarna YTH2148 (LO21H48A): Mower Deck Parts

This part is a replacement foot rest pad. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn or defective foot rest pad in a variety of lawn tractor models. This particular pad is intended for the left side.The foot rest pad ensures the user has a comfortable, non-slip surface on which to rest their foot. This part is subject to wear and tear and will require replacement with a genuine OEM part if worn, detached, or no longer effective. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to place this wheel, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this foot rest pad is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This footrest pad is a righthand footrest pad and is a genuine Husqvarna part. It is made as a replacement part for lawn tractors. The footrest pad is the part of the mower on which the right foot sits while the machine is being used. It is also sometimes used as a pedal.To replace the footrest pad, simply remove the old one and attach this replacement part. No further disassembly of the tractor is required, so it is a relatively simple repair. However, before replacing the footrest pad, be sure to take proper safety precautions such as disconnecting the spark plug, emptying the fuel tank, and allowing the engine to cool completely.This footrest pad is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. Please note that it is not compatible with the left side of the tractor. It is compatible with tractors made by Craftsman, Husqvarna, and Poulan. It replaces obsolete part # 165799X428.

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This hi-lift blade is a genuine OEM replacement for select 48-inch deck lawn mowers. The blade is attached to the deck using a bolt. When the engine is powered and the blade is engaged, it will rotate to cut the grass. With regular use, the blade can become worn beyond the point of sharpening. It can also become nicked or damaged from hitting rocks or other debris. When the blade is damaged, it needs to be replaced promptly for safe operation and optimal cutting. This genuine part can provide the replacement for compatible mowers. This OEM blade is manufactured by Husqvarna and designed specifically to be used in select mowers from the brand. It can also be used in models from Weed Eater, Craftsman/Sears, Poulan and Poulan Pro, and Roper. This blade features a 5/8-inch center hole for attaching and features a two-in-one operation that does not offer mulching. A mulching blade can be purchased if that feature is desired. Be sure to disengage the spark plug before going near the blade and wear gloves for hand protection at all times.

This stripper mandrel is an original OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually. A stripper mandrel is a type of mounting bracket. It is designed for use with outdoor lawn and garden power equipment, specifically for lawn mowers and lawn tractors. It is compatible with products by brands such as Craftsman, Husqvarna, Poulan, Murray, Ariens, and Dixon.The stripper mandrel part is crucial because it acts as a mounting bracket between the tractor's mandrel assembly and mower deck. It also is designed to protect the mandrel housing and bearing by blocking debris and preventing grass from building up on the mandrel housings. The purpose of the stripper mandrel is to keep the lawn mower or lawn tractor running optimally. The replacement or repair process of the stripper mandrel should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This stripper mandrel is black and round, and it is made out of metal.

This replacement part is a torsion spring. This is a genuine replacement part made by Husqvarna. This part works within a machine to provide torque to different parts so that the machine can run smoothly and properly. A new torsion spring might be needed if the current one is missing or damaged in any way including being dented or bent. Because of the nature of the spring, this part could snap under pressure and need to be replaced. Work gloves are recommended during this repair as springs can be dangerous if handled improperly. Be sure the engine is off before starting this repair as running parts may affect the installation.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This part is a genuine OEM replacement mandrel spacer washer usually used to line up drive pulleys on lawn tractors or riding mower engines. The drive pulley is an integral part of the transmission. As a type of washer, a mandrel spacer helps to distribute weight and pressure so that the link does not crack or bend. Compared to standard washers, though, mandrel spacers are quite thick, so they can take more of a load. The best time to replace a mandrel spacer washer is when making repairs to the drive pulleys. These parts take a lot of wear and tear and can corrode the connection over time. To prevent this from happening, replace the mandrel spacer washer as soon as it starts to look worn out or when conducting regular maintenance. This mandrel spacer washer is a top of the line replacement part for Ryobi, Jonsered, Weed Eater, Poulan, and Husqvarna engines. As such, this part comes sourced directly from its original manufacturer. This spacer washer does not ship with any additional hardware.

This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.

This flat idler pulley is an original OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually. A flat idler pulley is used in conjunction with the belt to transfer power from the engine to the machine, specifically designed for use with outdoor lawn and garden power equipment such as lawn mowers. It is compatible with mowers by brands such as Husqvarna, Poulan, and Weed Eater.The flat idler pulley part is crucial for the proper functioning of the lawn mower. The purpose of the the flat idler pulley part is to connect to the idler bracket. When this process functions properly, the flat idler pulley will then apply tension to the v-belt. The replacement or repair process of the flat idler pulley should be straightforward, although the user replacing the part should plan on using a wrench. Always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This flat idler pulley is made out of metal.

This replacement part is a pulley. It is a genuine replacement part made by Husqvarna. This specific pulley is found in different appliances that require moving parts during use. Pulleys typically help in the movement between two parts so that the entire appliance is able to work effectively. A new pulley might be needed if the current one is not working properly or is damaged in any way. If the part is not working as well as normal, it could lead to excessive friction between components and eventually overheating or greater damage. If the user notices unusual noises coming from inside the machine it might be due to a malfunctioning idler pulley. Be sure to refer to the correct user manual prior to replacing this part. This part is sold individually. This pulley is sourced directly from the manufacturer. It is also a genuine OEM replacement part.

This replacement part is an idler arm. This is a genuine replacement part made by Husqvarna. This idler arm is able to pivot the steering mechanisms and allows for the user to operate the machinery effectively and properly. A new idler arm might be needed if the steering of the machine is not as smooth as during prior uses. This can be due to the idler arm becoming stripped and is normal after years of use. Be sure to refer to the proper user manual before attempting to replace this part. This should be a fairly easy repair and would most likely only require common household tools. This part is also sold individually and is sourced directly from the manufacturer. This idler arm is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This V-belt is the primary belt used on many models of lawnmowers. It is used to link the clutch to the pulleys and the deck. The V-belt is a durable item but can become damaged or worn through regular use. If the belt is damaged, it can be cracked, have a burned appearance, or can experience sidewall damage. If any of these things occur, the V-belt should be replaced to prevent additional damage.Replacing a V-belt is simple and takes only a few minutes. A set of wrenches is all a user will need in terms of tools. Before replacing the belt, make sure the lawnmower is on a level surface, turned off, and has had the spark plug wire disconnected. Remove the belt covers from the lawnmower before taking out the V-belt. Replace with a new component and reassemble.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The V-belt is made to be used with lawnmowers manufactured by Poulan, Craftsman, and Husqvarna.

This idler pulley is an authentic OEM replacement part sourced directly from the manufacturer. This pulley guides the drive belt on riding lawn mowers to turn the blades that cut the grass. If the pulley is not working properly, or if it seizes or is jammed, the blades will not turn to cut grass. This can happen if large objects are run over and become lodged under the deck. If the pulley comes in contact with large stationary objects like hidden rocks, it may be damaged and not work. The idler pulley will need to be replaced if the blades are not turning.Before replacing the pulley, make sure the mower is cool to touch and remove the spark plug. Ensure that the actuator is in the off position and lower the blade to make it easier to access the pulley. Wear safety gloves to prevent injury when working with the blades. Detach all retaining pins from the deck to release them from the mower. Remove the nut holding the pulley onto the shaft and then remove the pulley and install the new one. Reverse the process to reassemble the mower. This idler pulley is a solid metal part that is sold individually. It does not come with a bolt or nut. This idler pulley is designed for use in lawnmowers and lawn tractors manufactured by Husqvarna.

This nose roller is a genuine Husqvarna part, sold individually. This nose roller can be used as a replacement part in a lawn mower. This part props the front of the mower deck up.The nose roller could be subject to damage in the form of puncturing, tearing, ripping, scraping, denting, or eroding; if any of these forms of damage prevent the nose roller from protecting the deck, the nose roller should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This nose roller is compatible with the following outdoor appliance brands: Husqvarna, Jonsered, Craftsman, and Poulan.

This washer is a genuine Husqvarna part manufactured for use with lawnmowers. It is also compatible with lawn tractors, garden tractors, riding tractors, and other similar equipment. It is a hardened flat washer that is rather large compared to other washers. This washer is often used to attach the mower deck to the mower itself. Removing it is often part of a larger repair, and a screwdriver or socket wrench may be required to make this replacement. It is not unusual for washers and other hardware to experience wear and tear, especially if the mower gets heavy use. It may also need to be replaced if it becomes damaged while making other repairs.This washer is a genuine OEM part sourced directly from the manufacturer. It is sold individually, so be sure to check how many are needed and order accordingly. It is compatible with equipment manufactured by Ariens, Craftsman, Dixon, Husqvarna, Murray, and Craftsman.

The shoulder bolt has many applications in lawn equipment, but this model is designed for use in riding mowers. The job of this shoulder bolt is to keep the gauge wheel in the correct place. This part is often referred to as the roller bolt. Over time, this bolt can become worn from regular use. The threads on the bolt may strip or it may become damaged as a part of other repairs or incidents. In any situation, the best option would be to replace the bolt with this genuine OEM model from Husqvarna. This shoulder bolt is manufactured to exact specifications for replacement in the gauge wheel. This part is designed for use with riding lawn mowers from Poulan, Husqvarna, and Jonsered. It is compatible with several machines from these brands. This shoulder bolt is made of durable metal and requires a wrench for installation. It is sold as a single unit and does not include any other parts. Always wear gloves when replacing parts for hand protection. Be sure to disconnect the spark plug prior to doing engine work. This part includes a one-year warranty from the manufacturer.

This part is a gauge wheel. A gauge wheel helps support the mower deck of lawnmowers and lawn tractors. The gauge wheel is also what allows the lawnmowers and lawn tractors to move.A new gauge wheel may be needed if the old one is physically broken or damaged in any way. The gauge wheel may need to be replaced after prolonged use due to build up of normal wear and tear. One of the most common ways that the gauge wheel is broken is when the lawnmower or lawn tractor runs over a small stump or concrete. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer. It is sold individually. The gauge wheel is compatible with lawnmowers and lawn tractors manufactured by Husqvarna, Rigid, Poulan, and Jonsered.

This screw is a common piece of hardware and serves as a replacement for those that are lost, damaged, or missing. It can be used for a range of machines, but it is typically used with lawnmowers and tractors as a means to fasten elements together and to reduce vibration.Although screws are meant to last, they can wear down and break over time. They may also become corroded from the elements. When repairing the machine, there is also the risk that the screws may be lost. Regardless of the problem with the screw, it will need to be replaced before the machine can be operated. The process is usually straightforward, but this can vary based on the location of the screw.The screws can be used with many models of lawn mowers and tractors from Husqvarna, Poulan, Ryobi, Weed Eater, and Jonsered. This is a genuine OEM replacement part sourced from the manufacturer. The screw is sold individually.

This rod roller nose, also sometimes referred to as an axle, is a genuine Husqvarna part. It is a replacement part for lawn mowers.This part attaches to the deck of the mower and prevents it from running into the ground while in operation. This prevents damage to other parts of the mower and can also help prevent an accident. It is not uncommon for the rod roller nose to become damaged or break as a result of normal wear and tear, especially under heavy use or after several years.This rod roller nose is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is manufactured for compatibility with mowers made by Husqvarna and Poulan.

This hairpin clip is a metal fastener, also known as a spring cotter or retaining pin. This is standard hardware that features a straight edge and an indentation to ensure secure attachment to desired parts or equipment. This reusable formed wire is easy to install and uninstall and has multiple applications. This part is commonly used in conjunction with clevis pins. This replacement hairpin clip comes in a polished finish. Use this genuine OEM replacement part on lawnmowers and tillers from Husqvarna, Craftsman, Murray, Weed Eater, Ryobi, Poulan and Poulan Pro. This item is priced and sold individually.