Parts for Mtd 41DDZ47C799: Drive Shaft / Handle / Shield Parts

This replacement part is an air filter. This is a genuine replacement part made by MTD. This filter is able to ensure that the air coming in and out of the machine is free of dust and other debris. This part is able to keep the engine safe and allows it to run smoothly. A new air filter might be needed if the current one is damaged or too dirty to clean. If the current part does not filter air properly, it might be best to replace it. If not up to working standard, the filter can cause the engine to become damaged if too much dust or debris gets inside. Be sure that the engine is completely shut down before replacing this part. This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This tube line is a genuine MTD part, sold individually. This tube line can be used as a replacement part for string trimmers. The function of the tube line for a string trimmer is to spool out of the trimmer head assembly and rotate such that it can cut through grass, hedges, bushes, and other greenery. Over the standard lifespan of an average string trimmer, the tube line might suffer damage that can stop it from rotating and cutting properly. If the tube line is knotted and cannot be unspooled from the head assembly, it can be repaired. However, if this happens frequently or if the problem is not solvable with the existing tube line, the broken or malfunctioning tube line should immediately be replaced by this genuine OEM replacement part before using the string trimmer again. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This tube line is compatible with the following brands: MTD and Craftsman.

This replacement part is a shoulder strap. This is a genuine replacement part made by MTD. This specific shoulder strap is typically found on edgers or grass trimmers. This enables the user to work more effectively and allows for the weight to be dispersed more evenly when maneuvering the appliance. A new shoulder strap might be needed if the current one is missing or damaged in any way. This could include being worn down or torn due to regular wear and tear over time. If the shoulder strap has become too loose and is unable to be tightened, it is recommended that it be replaced. This is a fairly simple repair and should only take a few minutes. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.

The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools. 

Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.

Symptoms of a bad On/Off Switch include:

• The equipment failing to start
• The machine not stopping when the switch is turned to the off position
• Intermittent power or erratic starting and stopping

This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.

This replacement part is a throttle trigger. This is a genuine replacement part made by MTD. This part is responsible for allowing the user to move the throttle and adjust the settings as needed. A new throttle trigger might be needed if the current one is damaged at all. This can be due to normal wear and tear after years of use. If the throttle trigger is no longer allowing the engine to be controlled, it is recommended that it be replaced as soon as possible. Refer to the proper user manual for more information on how to replace and repair this part. Work gloves are also recommended the prevent injury. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This replacement part is an upper boom assembly, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Boom assemblies are usually found in trimmers or edgers. This part connects the top of the machine to the base so the user is able to operate it while standing. A new upper boom assembly might be needed if the current one is visibly damaged or broken in any way including being dented, cracked, or snapped. If the boom assembly is not completely straight, the user might have a hard time keeping the appliance straight. This can result in a bad trimming job. This is a simple replacement and the user should be able to remove the old part and screw in the new one. This boom assembly is a genuine OEM part sourced directly from the manufacturer and is sold as a single piece.

This is an accessory hanger that is intended for use with a variety of lawn and garden equipment. It attaches to equipment so the tool can be hung up for storage. The hanger can help to ensure that tools are easy to access in an out of the way space.The hanger that is currently on the machine could be damaged or could crack after a lot of use, and it might need to be replaced. It is an easy replacement and should only take a matter of minutes at most.This hanger can be used with trimmers, edgers, pruners, blowers, and cultivators from Ryobi, Troy-Bilt, MTD, and Cub Cadet. Each hanger is sold individually. Owners with multiple pieces of equipment will want to buy as many as needed. This is a genuine OEM part sourced from the manufacturer.

This MTD link assembly is available individually as an individual component. The click link assembly fastens to the front of the mower and connects it to the mower's body. This setup keeps the deck from dragging the ground during mowing. When the click link assembly malfunctions, the front of the mower will drag the ground and create resistance. A dragging deck can make it nearly impossible to mow, and the deck could become jammed and damage the mower. The deck may begin shaking or rattling severely from excessive movement before the piece breaks completely. Replacing the click link assembly means the fuel tank must be removed. Use care when removing the tank. After completing the fuel tank removal, locate the click link assembly and remove the link pin with a pair of pliers. Next, remove the suspension arm on the frame and deck. Put the new link through the suspension arm and repeat these steps in reverse.This part is a genuine OEM product and is sourced from the original manufacturer. This part is compatible with Remington, Columbia, and MTD brands.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement in lawnmowers, snowblowers, string trimmers, pole pruners, and pole saws. The purpose of a screw in these devices is to affix and fasten components to one another through the process of rotation and piercing through the materials. A screw might have to be replaced in the standard lifespan of an outdoor appliance if it is lost, misplaced, or damaged. Check for punctures, tears, loosening, warping, or corrosion to the metal. This damage can stem from general wear and tear or from direct impact with a falling object or a surface. It can warp the component beyond repair, in which case it must be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, Murray, and Yard Man.

A lower flexible drive shaft is located inside lawn trimmer attachments. It is mounted inside the lower boom housing. The function of the part is to drive the trimmer head. The drive shaft will deteriorate and become more round with use. The rounded ends will ultimately fail to engage the trimmer head. The lower flexible drive shaft may also break or kink. The trimmer head stops quickly when this occurs. The trimmer will no longer function properly, and a replacement part is required.When replacing the lower flexible drive shaft in a trimmer, wear protective gloves. Start by removing the trimmer head, reel, and line assembly. Use a screwdriver to remove the outer head. Remove the guard assembly. Remove the bushing housing assembly. Access the lower flexible drive shaft and remove the damaged part. Lubricate the new part and install it with the lower flexible drive shaft's ring closest to the trimmer head. Reassemble the trimmer.This replacement part is an OEM genuine part supplied by the manufacturer. The lower flexible drive shaft can be used in MTD, Cub Cadet, Troy-Bilt, and Craftsman brand lawn trimmers. The part is sold individually. The lower flexible drive shaft is made of durable materials.

This replacement part is a gearbox intended for use in grass trimmers. This is a genuine replacement part made by MTD. Gearboxes connect the main handle of the appliance to the rotating blade attachment. It is important that this part is secure as the blade cutter can be dangerous if loose.A new gearbox might be needed if the current one is broken or damaged in any way. It is not unusual for this part to require replacement after years of normal use as it's easy for the gearbox to become stripped down. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with grass trimmers made by MTD.

This is a genuine replacement screw designed for use in select MTD engines on lawn and garden equipment. Specifically, this is an anti-rotation screw, which is used to stop the drive shaft housing from turning inside of the main housing assembly. This screw is a small part that is subject to constant vibrations, pressure, and high temperatures. It can sometimes become worn or damaged as a result or even break off entirely, which would mean that the inner housing would no longer be held in place accordingly. If this screw is damaged or lost, it needs to be replaced with a genuine OEM replacement as soon as possible. This MTD anti-rotation screw is manufactured with high-quality materials and designed for use in select trimmers from MTD, RYOBI, Yard-Man, Troy-Bilt, Murray, Cub Cadet, Yard Machines, and Bolens. This replacement will require a screwdriver. Simply remove the damaged screw, if it is not already missing, from the clutch cover assembly, and then install the new screw. It should only take a few minutes to perform the replacement. Be sure to wear gloves to protect the hands. This screw is sold individually and does not include any additional parts or hardware.

This replacement part is a screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Screws are found in almost every different type of machinery and are essential to the overall performance of different devices. Screws are responsible for holding things in place and securing them tightly so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is damaged or missing. It is possible for screws to be stripped over time and can become stuck in place. In this case, pliers might be needed to remove the faulty screw. Otherwise, this repair should be fairly simple and only require a screwdriver. Be sure the machine is powered down before replacing this part. This specific screw is sold individually and is a genuine OEM replacement part. Be sure to purchase the correct amount as many devices require more than one.

This screw and nuts set is a genuine MTD part, sold individually. This screw and nuts set can be used as a replacement part in a string trimmer. This set provides a variety of screws and nuts which serve as fastening components within the string trimmer.The screw and nuts set in a string trimmer might have to be ordered as a complete replacement part if one or more screws or nuts in the string trimmer has been lost, misplaced, or damaged. If this occurs, the screw and nuts set should be ordered as a genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw and nuts set is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Bolens, and Yard Man.

Trimmers have a shield assembly that protects the user from flying debris while the trimmer string is in operation. If this assembly cracks or falls off, the trimmer should not be operated until a new on is installed. Over time, the sun's heat may cause the plastic to crack, ultimately leading to the shield falling off. Safety is an important factor when operating lawn and garden equipment. Routine inspections of all equipment will reveal if any of the safety components of the machines are broken or missing.This shield assembly is an authentic OEM replacement part sourced directly from the manufacturer. Before installing this part, make sure the spark plug is removed and wear safety gloves. After removing the damaged shield, this shield should be installed using the screws from the one taken off the trimmer. This shield assembly is a black molded plastic part that is sold individually. It does not come with screws. It is designed for use with trimmers manufactured by Troy-Bilt and Craftsman.

This head assembly is a genuine MTD part. It is manufactured as a replacement part for trimmers. On a trimmer, the head assembly is the part that contains the string or other cutting device. It is an important safety component, as well as important for operating the trimmer. Replacing the trimmer head is not a complicated repair and requires only simple tools. The head on most trimmers will screw off, and the new one can be attached. It is not uncommon for the trimmer head to be damaged from wear and tear or in an accident. In order to remove the trimmer head, turn it to the right instead of the left. Before doing so, disconnect the spark plug to prevent the equipment from accidentally powering on. Allow the engine to cool completely as well.This head assembly is a genuine OEM part sourced directly from the manufacturer. It contains the parts necessary to replace the head and is sold individually. It is compatible with machines made by Craftsman and MTD.

This trimmer head cover is designed to fit a variety of string trimmers from major manufacturers. The trimmer head cover is the component that covers and protects the cutting head on the trimmer. It is made from durable materials but can become damaged, broken, or lost through wear and tear or impact against other items. Normal use of the string trimmer can create cracks and other forms of breakage, which will require the trimmer head cover to be replaced.The process of replacing the trimmer head cover is simple and takes only a few minutes. The head cover has a set of tabs that can be used to install or remove the part. Make sure the trimmer has been turned off, and the spark plug wire is disconnected. Remove the original head cover and replace it gently with the new replacement part. Replace the spark plug wire before using the trimmer.This is a genuine OEM replacement part that is directly sourced from the manufacturer and sold as an individual part. The trimmer head cover is designed to be used with string trimmers manufactured by Craftsman and MTD.