Parts for Bosch WFMC6400UC/01: Drum Assembly Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This washing machine balance counterweight is a heavy concrete block attached to the left side of the washer tub to reduce vibration during spin cycles. It helps keep the machine stable and prevents excessive shaking or walking across the floor. Replace this counterweight if it's cracked, broken, or if your washer vibrates excessively or moves during operation.

This is a mounting holder used inside a washing machine to secure internal components in place. It provides structural support and helps maintain proper alignment during operation. Replace this holder if it is cracked, worn, or broken, which can cause excessive vibration, unusual noises, or misalignment of internal parts.

Replacement screw for washer assembly. Used to secure internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Front drum motor mounting bushing for washers. Supports the drum shaft for smooth rotation. Replace if worn, cracked, or causing misalignment issues.

Washer fixing kit secures internal components and prevents vibration or movement. Replace if parts are loose or machine rattles. Confirm fit with your model.

This is the main washing drum where clothes are cleaned during wash cycles. It rotates to agitate and tumble clothing through the wash and spin cycles. Replace this drum if it's cracked, rusted, or damaged, causing clothes to snag or the washer to be unbalanced.

This is the main washing drum where clothes are cleaned during wash cycles. It rotates to agitate and tumble clothing through the wash and spin cycles. Replace this drum if it's cracked, rusted, or damaged, causing clothes to snag or the washer to be unbalanced.

Prevents water leaks where the drum connects to the machine. Replace if you notice leaking or bearing noise. Confirm fit with your model number.

Cable harness for washer control panel and electrical connections. Replace if damaged, frayed, or has broken connectors affecting wire routing.

Cable harness for washer electrical connections. Replace if wires are damaged, frayed, or connectors are broken. Restores proper wiring between components.

Fix a washer that won't heat water properly or stops mid-cycle with error codes. This temperature sensor monitors and regulates water temperature accurately.

Replacement mounting screw for washers. Secures panels, brackets, and components in place. Replace when stripped, missing, or damaged during repairs.

Washer fixing kit secures internal components and prevents vibration or movement. Replace if parts are loose or machine rattles. Confirm fit with your model.

Replacement support bracket for your washer. Installs to secure internal components. Needed when original is cracked, broken, or missing during repairs.

Structural holder component for front-load washers. Secures internal parts in place. Replace if cracked, broken, or missing to restore proper assembly.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Plastic baffle installs on the inner drum rim to lift and tumble clothes during wash cycles. Replace if cracked, broken, or missing pieces.

Seals the door opening on front-load washers to prevent leaks. Replace if torn, moldy, or leaking. Verify fit by your model number before ordering.

The Drive Motor is an OEM replacement part for Bosch washing machines. This powerful motor is responsible for driving the drum rotation during the wash and spin cycles.

A bad drive motor can occur due to electrical faults, mechanical issues, or normal wear and tear over time. Signs of a faulty drive motor include the drum not spinning or agitating, unusual noises coming from the motor, or the washer not starting at all.

Symptoms of a bad drive motor include:

• The drum not spinning or agitating  
• Unusual noises
• The washer not starting  

Replace your faulty washer drive motor with this genuine OEM Bosch part to restore your washing machine. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

Drive pulley for washer drum and motor belt system. Replaces worn, cracked, or damaged pulleys that cause belt slippage or wobbling during operation.

Seals washer door to prevent water leaks during wash cycles. Replace if torn, cracked, or moldy. Confirm fit with your model number before ordering.

Spring tank secures and positions an appliance tension spring to maintain proper movement and balance for a door or other moving assembly. Replacing a worn or broken tank restores correct spring alignment and smoother, more reliable operation. What it does:

• Holds the end of the tension spring and keeps it aligned in the assembly.
• Maintains correct spring tension so doors or panels open, close and remain balanced.
• Prevents spring detachment that can cause sudden drops, misalignment or noisy operation.
• Common symptoms of a failing tank: door drops or won't stay open, uneven closing, rattling or banging during movement.

• Disconnect power to the appliance before starting any repair to avoid electrical hazards.
• Support the door or moving panel while replacing the tank to prevent sudden movement or injury.
• Use the OEM part orientation and hardware; inspect the spring and mounting points for wear and replace if scored or damaged.
• Test the door/panel operation several times after installation to ensure correct tension and secure mounting.

Secures the door boot to the tub on front-load washers. Replace if you notice increased vibration, noise, or water leaks. Confirm fit with your model.

Fix a washer that won't heat water with this heating element. Common solution for cold wash cycles and poor cleaning results. Moderate DIY repair.

The Tank Spring is an OEM part for Bosch washing machines. It is located within the central support assembly below the washer tub. The spring provides counterbalancing tension to assist the tub during movement and rotation.

Causes can be fatigue from years of use, mineral buildup hindering spring function, or damage such as cracks or breaks in the spring coil.

Symptoms of a bad tub support spring include:

• Excessive vibration or off-balance loads during spin cycles
• Noisy squeaking or grinding sounds from central support area
• Difficulty lifting or rotating the tub for loading/unloading

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Secures the door boot gasket to the washer tub. Replace if stretched, rusted, or causing leaks. Confirm fit with your Bosch front-load washer model.

Controls drum movement and reduces vibration during the spin cycle. Replace if worn, cracked, or causing excessive bouncing to restore stability.

Plastic baffle installs on the inner drum rim to lift and tumble clothes during wash cycles. Replace if cracked, broken, or missing pieces.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.