Edger Carburetor

This Craftsman carburetor is the component that mixes together gas and air before the mixture can reach the engine to power a lawn trimmer. If there isn’t enough fuel in the mix, it can damage the engine or cause the trimmer not to run. Too much fuel can create excess smoke, poor performance, or can prevent the engine from starting. Testing whether a carburetor needs to be replaced can be done by adding a small amount of fuel to the component after removing the air filter. If the engine begins to run but quickly sputters out, this is an indication that the carburetor has a problem. A replacement carburetor can be installed using a wrench, pliers, and safety glasses. This trimmer component is genuine OEM and comes directly from the manufacturer. It is compatible for use with lawn trimmers by Craftsman and MTD. This is an individual item that comes with the carburetor assembly and the carburetor gasket. Pliers and screwdrivers may be needed to complete this replacement or repair.

This carburetor assembly is a genuine MTD part, sold individually. This carburetor assembly can be used as a replacement part in a variety of outdoor appliances including lawn mowers, string trimmers, and edgers. The purpose of a carburetor assembly for one of these outdoor appliances is to prepare a mixture of fuel and air in the proper ratio so that the mixture can be fed into the spark plugs to ignite them and to power on the engine as a result. If the engine is not starting, is hard starting, or if the spark plugs are not igniting properly, the carburetor may be damaged and will require replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This carburetor assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This replacement part is a carburetor kit. This is a genuine replacement part made by MTD. This kit is used in many types of machinery and works to ensure that the engine is running properly during use.A new carburetor kit might be needed if the current one is damaged is misplaced at all. This can be due to a single incident or from normal wear and tear. If the engine is struggling to start, it can be due to a faulty carburetor kit. Be sure the engine is completely turned off before attempting to replace this part. Work gloves are also recommended when working near or around the engine. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a replacement carburetor assembly that can be used for small engines, such as those found on lawn and garden equipment. The carburetor is where the air and fuel mix before going into the engine. It ensures that there is an accurate ratio of fuel and air, so the engine can start and run efficiently. While carburetors can last a long time, there is always a chance that they will need to be replaced. Normal wear and tear, damage from accidents, chemicals, or corrosion could mean a replacement is necessary. If the owner finds that their engine is sputtering, misfiring, not performing properly, or has trouble starting, the carburetor could have failed. The authentic OEM replacement carburetor features the metal body and the rubber primer bulb. It does not come with gaskets. The carburetor could be used for tillers, trimmers, and edgers. Compatible brands include Cub Cadet, MTD, Yard-Man, and Craftsman. Buyers must make sure they are buying the correct carburetor kit for their engine.

This high quality choke lever is used on string trimmers and edgers from multiple manufacturers. The plastic choke lever actuates the choke valve which creates a limit to the amount of air that can enter the engine when the equipment is cold started. If the choke lever has been damaged or is broken, it may create problems with starting the tool. If this is the case, the choke lever will need to be replaced.This is a simple replacement project that requires only a screwdriver and a pair of work gloves. Before starting, make sure the tool is turned off and the spark plug wire has been removed. Place the tool on a flat surface and take out the choke lever. The broken choke lever can be removed using the screwdriver. The new replacement choke lever can be installed before tightening the screws and using the equipment again.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The choke lever is made for use with edgers and string trimmers manufactured by Craftsman, Husqvarna, and Poulan.

This is a replacement carburetor for use with several types of handheld lawn and garden equipment. The carburetor is the part of the machine that is responsible for mixing the air and fuel in the right ratio before it goes into the engine. Over time, the carburetor may start to have problems. When this happens, it will mean that there is not a correct fuel and air ratio. The engine can have trouble starting, running, and it will often stall. This could be because a part of the carburetor has worn down or broken. To test the carburetor, users can remove the air filter. Then, add a teaspoon of fuel to the carb and start the engine. If it starts and then dies quickly, the carburetor could be the problem. This carburetor is a genuine OEM replacement part. It is sold individually and comes with the fuel lines and the primer bulb. It can work for many models of string trimmers and edgers. Compatible brands include MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Machines.

This part can be used to replace a deteriorating or broken throttle linkage spring, which helps to regulate the speed of outdoor power equipment.As throttle linkage springs age they begin to wear out or can easily break. This can cause serious problems with regulating the speed of outdoor power equipment such as lawn mowers and trimmers. A broken or weak throttle linkage spring will stop the throttle on the equipment from returning to the off or resting position when the throttle is released. This can be dangerous. This throttle linkage spring is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement throttle linkage spring fits various different MTD, Cub Cadet, Craftsman, and Troy-Bilt models of lawn mowers, log splitters, and trimmers. Please note that this part is sold individually.

This carburetor kit is a genuine Husqvarna part that can be used as a replacement part inside snowblowers, wood-chippers, lawn mowers, and other outdoor appliances. The function of the carburetor kit in a small engine is to mix the air and the fuel together at a proper ratio for combustion before they are both passed into the engine via the network of valves. This carburetor kit includes the carburetor and the primer bulb. If the carburetor kit is indeed malfunctioning or in a state of disrepair, there are signs to look for in confirming the issue. Pour a spoonful of fuel directly into the carburetor and try to start the engine with the recoil starter. If the engine fails after a quick false start, the carburetor kit might be in need of repair or total replacement. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carburetor kit is compatible with the brands Husqvarna and Weed Eater.

This non-vented primer assembly is a replacement part that can work with a range of lawn and garden equipment. This assembly features the push-bulb that is used to create a vacuum that draws fuel into the carburetor, so it can help to start the engine. If the primer assembly is damaged, it will not create a vacuum to pull the fuel from the tank. This can result in equipment that does not start.The primer assembly is made from plastic and rubber. Although it is built to last, it can wear down. The bulb might crack, or it might not connect correctly, for example. If there are any issues with the primer assembly, the part should be replaced right away.The non-vented primer assembly will work with select models of trimmer and mower from Yard Machines, Husky, Troy-Bilt, and MTD. This assembly is sold individually. It is an authentic part that has been sourced from the OEM.

This carburetor assembly is a genuine MTD part. It is a replacement part for several models of lawn mowers and trimmers. The carburetor is the part of the engine that balances the amount of air and fuel in the engine. Even if the carburetor has malfunctioned, the mower or trimmer may still run but at reduced capacity, which may cause damage to the engine. This replacement can be done at home with pliers, a screwdriver, and basic safety equipment. Be sure the engine is completely cooled, disconnect the spark plug, and empty the fuel tank before beginning.This carburetor is a genuine OEM part sourced directly from the manufacturer. It is compatible with machines made by MTD and Troy-Bilt.