Edger Control Cable

This is a genuine replacement OEM throttle control cable. The throttle control cable is comprised of an internal wire that slides through the external housing. Force is transferred from the accelerator pedal to the control linkage mounted to the throttle body from this sliding movement. If constant speed is not being maintained from the cruise control or delays starting, stopping, or jerking, then it may be time to replace the throttle control. To replace the throttle control a pair of pliers is needed. Remove the cable housing using pliers. The housings will swivel off the base and slide down the cable. Next, thread the cable wire through the housing. Locate the wire base on the back of the engine and run the cable through the throttle base and throttle arm. With the throttle all the way down, slide the cable through the housing and into the handle unit to attach it to the throttle handle. Pull the cable with a pair of pliers to make it tight and turn the lock screw. Replace the throttle to test the tension. If the mower, edger, or trimmer is running too high then loosen the cable.This throttle control works with lawn mowers, edgers, and trimmers. This is an OEM part sourced directly from the manufacturer and sold individually.

This OEM part is a depth cable for lawnmowers. Also known as a stop cable, the depth cable is the cord that stops the blades from running when the mower is in an idle position. If the lever has been released and the blades are still rotating, this might mean that the depth cable is no longer functioning and needs to be replaced. Luckily replacing the depth cable is a relatively simple fix. To replace the depth cable, begin by removing the bracket that holds the cable to the handle by using a screwdriver to pry it off. On the lower part of the handle, there is a clip that secures the cable. Remove the clip and disconnect the end of the cable near the kill handle. Locate the brackets connected to the engine. Remove the plastic tabs securing the cable housing with a pair of needle-nose pliers and pull the housing away from the bracket. Set the old cable aside and reinstall the new cable in reverse order. This genuine replacement part is sold individually and is compatible with MTD brand lawnmowers.

Replacement throttle control cable for edgers. Connects the throttle lever to the engine carburetor. Replace if cable is frayed, broken, or sluggish.

This replacement part is a control cable assembly, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Echo. The control cable assembly is an important part of different types of lawn equipment as it aids the user in controlling the power and speed of the machine. A new control cable assembly might be needed if the current one is not working as normal, or if the user notices that it is damaged or disconnected. The control cable is responsible for controlling different parts of the appliance, for example, the switch wires and throttle. If those parts are not being controlled correctly, it might be time to replace the control cable assembly. Remember to power down any lawn equipment before attempting to replace parts as to not get injured. Reference the specific user manual for more instructions on how to replace this part. This control cable assembly is an OEM replacement part. It is sold individually and is compatible with lawn equipment manufactured by Echo.