Electrolux Refrigerator Drawer, Shelf, Pan

The Drawer is an OEM part for Frigidaire refrigerators. This component provides a storage solution within the refrigerator, allowing you to organize and store various food items efficiently. It is designed to slide in and out smoothly, offering easy access to the stored contents.

Causes of a bad drawer can include physical damage from heavy or improperly stored items, wear and tear over time, or issues with the drawer's sliding mechanism. A damaged or malfunctioning drawer can hinder proper storage and organization within the refrigerator.

Symptoms of a bad drawer include:

• Difficulty sliding the drawer in and out
• Cracks or breaks in the drawer material
• The drawer not staying in place or falling out
• Reduced storage efficiency within the refrigerator

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Supports and holds the meat or deli drawer in your refrigerator. Replace if broken, cracked, or worn. Installs on the left or right interior wall.

The Upper Freezer Door Bin is an OEM part for Frigidaire side-by-side refrigerators. It provides organized storage for freeze-sensitive items like ice cream in the freezer door. The door bin measures approximately 13"L x 5 1/2" W.

Over time, repeated opening and closing of the freezer door subjects the storage bin to mechanical stresses and impact damage. Cracks or breaks in the plastic can compromise its storage function.

Symptoms of a problematic freezer door bin include:

• Inability to safely or efficiently store items
• Cracks or breaks in the plastic that compromise structural integrity
• Discoloration or mineral buildup reducing storage capacity

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Crisper pan for refrigerators. Stores fruits and vegetables in the lower compartment. Replace if cracked, broken, or missing for organized storage.

Replacement glass shelf for refrigerator compartments. Installs on shelf frame to hold food and beverages. Replace if cracked, shattered, or broken.

Replacement crisper pan cover for refrigerators. Installs above crisper drawers. Replace if cracked, broken, or missing. Includes frame only.

Replaces cracked, broken, or missing dairy compartment door on your refrigerator. Installs on the inside of the main door to restore access and freshness.

Storage bin that installs inside your refrigerator door to hold bottles, condiments, and containers. Replace if cracked, broken, or missing.

Side-mounted bracket that supports and guides freezer baskets in refrigerator freezer compartments. Replace when cracked, broken, or missing to restore basket support.

Mounts to the freezer wall to support wire baskets. Replace if cracked, broken, or pulling away from the wall causing baskets to sag or fall out.

Lower freezer basket for side-by-side refrigerators. Installs at the bottom of the freezer compartment. Replace if cracked, broken, or missing.

The Refrigerator Freezer Drawer Assembly is an OEM replacement part for Frigidaire bottom-mount refrigerators. It provides a pull-out storage solution accessible from the bottom of the refrigerator. The drawer assembly contains the necessary components to function as a freezer compartment.

Symptoms of a bad drawer assembly include: 

• Difficulty opening or closing the drawer  
• Improper freezing or frost buildup inside
• Temperature fluctuations within the drawer
• Water or air leaks causing freezer burn on contents

Causes may be related to wear and tear over time, particularly on moving parts. Damage from overloading or other mishandling could also impair operation. 

This replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore side-by-side refrigerator models.

This replacement door bin mounts on the inside of your refrigerator door to hold bottles, jars, and condiments. Replacing a cracked or loose bin restores safe, usable storage and helps keep items organized and accessible.

• Provides storage on the door to keep bottles and jars upright
• Restores capacity when the original bin is cracked, warped, or missing
• Helps prevent items from tipping or falling when the door opens/closes
• Common symptoms: bin falls off, won't stay seated, or has broken tabs/cracks

What's included: 1 door bin Install notes:

• Remove all items from the old bin; lift straight up to release from the door slots
• Align the new bin's tabs with the slots and press down until fully seated
• Do not force; re-align if resistance is felt to avoid damaging the door liner
• Place in the correct door position for your model; some bins aren't interchangeable between levels

This bin door is the hinged cover for a door storage bin. It restores a secure flip-down barrier that keeps items contained and helps prevent spills when you open or close the appliance door.

• Provides a flip-down cover for a door bin to retain items securely
• Pivots on side hinge points for easy access to contents
• Replaces cracked, warped, or missing covers that won't stay in place
• Common symptoms include broken tabs, loose fit, or items falling during door movement

• Disconnect power and empty the affected bin before starting
• Release the old cover from its side hinges/tabs; note orientation for reassembly
• Allow the new cover to reach room temperature; align with hinge points and snap into place without forcing
• Open and close the cover to confirm smooth pivot and secure engagement

Door bin mounts to the refrigerator door to hold bottles, jars, and condiments. Replace a cracked, broken, or missing bin to restore secure storage.

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.