Electrolux Refrigerator Drawer, Shelf, Pan

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This pizza shelf is a direct-replacement oven shelf designed to support pizzas and other flat bakeware for stable, even cooking. Restores a missing or damaged shelf so trays and pans sit level during use. What it does:

• Provides a flat, stable surface for baking pizzas, sheet pans, and similar items
• Replaces a warped, bent or missing pizza shelf that prevents level cooking
• Helps keep cookware centered and supported to reduce sliding or tipping
• Durable finish resists everyday oven use and helps maintain even heat exposure

• Slide shelf onto existing oven rack supports until it sits securely; no tools typically required
• Allow oven to cool before removing or installing the shelf to avoid burns
• Clean with non-abrasive cleaners; avoid harsh scrubbing that can damage the finish
• Follow your oven manufacturer's instructions for safe use and placement

This tilt-out rack is the refrigerator door shelf that holds small items and lets you access them easily by tilting forward. It restores secure storage on the door and keeps items from falling when the shelf is damaged. What it does:

• Provides a shallow, front-tilting shelf for small containers, butter, or condiment storage
• Keeps door-stored items contained and easy to reach
• Replaces cracked, warped, or broken door shelves that cause items to fall
• Restores proper fit and function so the door closes smoothly

• Remove all items from the door and work with the door open on a stable surface
• Tilt or lift the old rack out per the OEM door-shelf removal method; avoid prying with metal tools
• Handle edges carefully; some racks and mounting clips can be sharp or brittle
• Follow the refrigerator manufacturer's instructions for reinstallation and parts compatibility

This replacement glass shelf provides a stable, easy-to-clean surface for storing food items in your refrigerator. It restores proper shelving organization and helps prevent spills from reaching lower compartments. What it does:

• Replaces broken, cracked, or missing refrigerator shelving to restore usable storage space
• Supports food containers and small appliances while keeping items level and accessible
• Helps contain minor spills on the shelf surface for easier cleanup
• Fits into existing shelf tracks or ledges to secure items during normal use

• Slide the shelf into the existing shelf supports or track;
• Handle glass carefully and wear cut-resistant gloves to avoid injury during installation
• If shelf hardware or support clips are damaged, replace them before reinstalling the new shelf
• Keep children away from the work area until installation is complete and the shelf is secure

This spill-safe glass shelf replaces a cracked, chipped, or stained refrigerator shelf and helps contain spills for easier cleanup while restoring usable storage space. Ideal when a shelf no longer holds items securely. What it does:

• Replaces a damaged or missing refrigerator shelf so you can store items safely.
• Helps contain spills and drips on the shelf surface to limit mess to one area.
• Provides a flat, stable surface for food and containers.
• Restores original appearance and functionality to the shelf area.

• Remove all food and loose items from the shelf area before replacing.
• Carefully slide the shelf into the existing support rails or brackets until it seats securely.
• Handle the glass with care and wear gloves to avoid cuts during installation.

This replacement freezer shelf restores stable, organized storage in the freezer compartment. Replacing a broken or missing shelf helps maximize usable space, keep items level, and support proper airflow for consistent performance.

• Provides a sturdy surface to store and organize frozen foods
• Seats in the factory side supports for correct spacing and fit
• Helps maintain air circulation between shelf levels
• Typical symptoms: broken or sagging shelf, items tipping, shelf won't stay seated, or a missing shelf

• Remove or secure food from the area where the shelf installs
• Align the shelf with the side rail slots and slide or seat it fully into place
• Confirm both sides are engaged and the shelf is level before loading
• Handle carefully; wear gloves to protect hands

This flat freezer shelf provides a stable surface for organizing frozen foods and maximizing usable space in the freezer compartment. Durable and easy to clean, it replaces worn or damaged shelving to restore proper storage. What it does:

• Replaces a damaged, bent, or missing freezer shelf so items sit level and storage is restored
• Supports frozen food containers, packages, and baskets to prevent collapsing or sliding
• Helps maintain airflow by keeping items organized and off the compartment floor
• Reduces risk of spills and messy defrosting by providing a stable shelf surface

• One replacement freezer shelf

• Turn off power to the appliance and empty the freezer compartment before installing
• Slide shelf into the factory support rails or brackets until it rests securely
• Do not force the shelf into place; check that any stops or clips align with factory mounts
• If your shelf uses mounting clips or supports, verify they are present and undamaged before installation

This deli drawer cover (frame) replaces the clear/trim cover that protects the deli/meat compartment and helps keep contents contained and visible. Restores a secure cover and improves food containment in the drawer area. What it does:

• Replaces a cracked, chipped or missing deli drawer cover so food stays contained and visible
• Helps keep deli items separated from other refrigerator areas and reduces direct exposure
• Provides the clear viewing surface for the deli compartment so you can check contents without removing the cover
• Snaps into place on the deli drawer frame for a finished appearance

• One deli drawer cover (frame) — exact, OEM-design replacement

• Remove all food from the deli drawer before replacing the cover
• Typically snaps into the deli drawer frame; no special tools usually required
• Inspect mounting tabs for damage and align clips before pressing into place
• If tabs are broken, replacement of the mounting frame or clips may be required

The Lower Freezer Basket is an OEM part for Frigidaire refrigerators. It is designed to provide organized storage space within the freezer compartment, allowing you to efficiently separate and access frozen goods. This basket fits at the lower section of the freezer, maximizing storage capacity and ease of use.

Causes of a bad lower freezer basket can include wear and tear over time, damage from heavy or sharp items, or warping due to temperature fluctuations. 

Symptoms of a bad lower freezer basket include:

• Difficulty sliding the basket in and out
• Cracks or breaks in the basket
• Warped or misshapen basket
• Items falling through or getting stuck in damaged sections

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This crisper cover trim restores the finished edge around the refrigerator crisper cover for a clean, factory appearance and proper seating. It replaces damaged or missing trim to help the crisper cover sit securely. What it does:

• Replaces the trim piece that finishes and protects the crisper cover edge.
• Helps the crisper cover seat correctly and reduces gaps where debris can collect.
• Restores cosmetic appearance when the original trim is cracked, worn, or missing.
• Prevents minor rattling or shifting of the crisper cover caused by damaged trim.

• Remove food from the crisper area and slide out the cover to access the trim.
• Align trim with the cover edge and press until clips or tabs engage; do not force.
• Inspect mounting clips—if they are broken the clips must be replaced for a secure fit.
• Handle glass or plastic covers carefully to avoid breakage.