Parts for Remington 41AR2BEG983: Engine Assembly Parts

This genuine MTD muffler assembly can be used as a replacement part for a string trimmer, a leaf blower, or a leaf vacuum. The muffler assembly contains a replacement muffler and the components that collectively fasten the muffler to the appliance. The purpose of a muffler for one of these outdoor appliances is to silence or soften the engine and to filter the air that exits the engine to direct the exhaust away from the person operating the appliance.A muffler might suffer damage in the lifespan of an appliance that could necessitate its replacement as well as the replacement of its associated components. If the muffler is no longer softening the noise of the appliance or if the exhaust blows unfiltered air directly toward the operator of the appliance, these are symptoms that the muffler should be removed and replaced with this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This muffler assembly is compatible with the following brands: MTD, Cub Cadet, Troy-Bilt, and Craftsman.

This is a replacement spark plug that is designed specifically to be used with select string trimmers. the spark plug is connected to the ignition module and is responsible for creating the spark that starts the internal combustion engine. Over time, the electrode on the spark plug will wear down. Other issues can also arise that cause the spark plug to foul or stop working. Spark plugs are part of routine maintenance on any engine, but most owners keep a spare or two around just in case of emergencies. In the event that the spark plug is bad, the engine will not start. This genuine OEM spark plug is manufactured by MTD and designed for use in select trimmers. It is compatible with over 50 models of string trimmers from MTD, Bolens, Murray, Troy-Bilt, Yard Man, and Cut Cadet. Owners will need to consult their product diagram or manual to find the exact gap for the spark plug when replacing them. Many models claim to come pre-gapped, but they can settle during shipping and should always be re-gapped prior to installation. This is sold as an individual unit. Be sure to wear gloves for hand protection when replacing spark plugs and performing other maintenance.

This is a genuine replacement pawl assembly for select MTD engines. This pawl assembly attaches to the crankshaft in the motor. It is responsible for rotating the shaft and flywheel as a reaction to the recoil starter rope being pulled. The part is subject to constant motion and can wear down over time or otherwise fail. If the pawl assembly goes bad, the shaft and flywheel will not be able to rotate and the engine will not run properly, if at all. A replacement part like this model will solve the problem for compatible units. This genuine OEM pawl is manufactured by MTD to exact standards to provide a fit for compatible machines from Troy-Bilt, MTD, Cub Cadet, and Yard Man, including blowers and trimmers. This pawl assembly includes the metal housing, two plastic pawls, and two springs, which makes it a complete part that requires no additional purchase. This unit is sold as an individual piece. Ensure the engine is cool prior to repair and wear gloves to ensure hand protection when working on the moving parts of the engine. Disconnect the spark plug to protect from accidental engine engagement, as well.

This is an insulator assembly includes the insulator, seals, and hardware. It is designed to create the right spacing between the cylinder and carburetor on many blowers and trimmers made by various manufacturers. The insulator assembly also keeps heat from moving between the other components. Over time, the insulator assembly can become damaged or crack. When this occurs, air can reach the engine and create a condition where the engine can't perform at its best. If this happens, the insulator assembly will need to be replaced. Take off the air filter, drain the fuel, and remove the intake assembly. The insulator can be taken off of the engine before the replacement is added. Use mounting screws to fit the insulator to the other components. Reassemble the other parts to use the tool.This insulator assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. This component is made to be used in leaf blowers, tillers, and string trimmers manufactured by Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.

The design and purpose of the O-ring is relatively self-explanatory. It is an “O” shaped ring used as a gasket in lawn and garden equipment. It is designed to sit within a groove and be compressed during assembly. It creates a perfect seal that blocks the path of liquids or gases from escaping or flowing into regions of the machine where they are not supposed to be.The O-ring may be damaged if an outdoor piece of equipment is struggling to start or run. After checking the air filter cover, removing the carburetor, and cleaning it thoroughly, the next step is to replace the O-rings, carburetor gasket, and air filter, followed by the spark plug. Regular maintenance of the carburetor and routine evaluation of the suitability of the O-ring is essential to proper mechanical maintenance.This O-ring is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. The manufacturer of this product is MTD. Examples of compatible products and machines includes trimmers, tillers, weed wackers, brush cutters, and leaf blowers or leaf vacuums. It is compatible for products made by the following brands: MTD, Cub Cadet, Craftsman, and Troy-Bilt.

A carburetor gasket is a thin rubber material that provides a seal between two parts. Its primary purpose is to prevent fuel and air leaks. This gasket is installed between the air cleaner and the carburetor. Over time, it can crack and tear due to heat and fuel exposure. When this happens, the carburetor may produce the wrong combustible mixture for the engine. In return, the engine may experience rough idling and flooding. A carburetor gasket replacement is necessary. MTD makes this carburetor gasket replacement. It is manufactured to fit string trimmer, leaf blower and tiller made by MTD, Bolens, Troy-Bilt, and Craftsman. This brand-new carburetor gasket is sold individually. A fully assembled carburetor and O-ring are sold separately.

This is a replacement air filter for a trimmer, leaf blower, or vacuum. It is necessary to prevent any significant quantities of dust or debris commonly kicked up during the use of the machine from entering into the engine. It could block the airflow, overheat the motor, and harm or destroy it. This OEM replacement part is straightforward to install and depending on the model, will usually require little more than a screwdriver to effect the repair. The removal of the housing over the filter is needed, and then it is a matter of just removing the clogged our outdated filter and slipping in the replacement. Shaped like a cup, it will fit snugly into the housing, and make reassembly just as simple. Before replacement, the filter should be treated with some oil by popping it into a plastic bag with a few drops of oil and working it into the material. This genuine OEM air filter works with Craftsman, Ryobi, Troy Bilt, Yard-Man, Bolens, MTD, Cub Cadet, and Murray machines, among others. It ships individually.