Parts for Echo HC-151 (02001001-02999999): Engine / Short Block / Ignition / Clutch Parts

This is a standard hardware screw that is used in multiple applications on lawn and garden equipment. The hex screw may be used to secure various components of the housing or engine on machines. Due to constant vibrations and use, these screws may become worn, stripped, broken, or even lost over time. In the event that a screw is damaged or missing, it should be replaced immediately to prevent further damage and ensure optimal operation of the machine. This screw can provide the ideal replacement for compatible machines. This genuine OEM screw is manufactured by Echo and designed to be used with select Echo, Little Wonder, and Shindaiwa lawn and garden equipment. Because this is standard hardware with multiple applications on more than 150 models of machines, it is important to check the parts diagram for exact location and application. This screw can be found on edger/trimmer models, blowers, and hedge trimmers. The screw is sold as an individual unit and includes a nut and lock washer to secure the screw in place. An Allen key or hex key will be required for replacement. Always wear gloves and allow the engine to cool before doing any parts replacements.

Piston rings help to maintain the pressure between the piston and cylinder wall. If the compressed gas between these two parts begins to leak out, the engine will not be able to put out enough energy, and the lawn appliance will stop working. Piston rings can wear out over time due to engine overheating or faulty ignition in the engine. A telltale sign of a burnt-out piston ring is whitish-grey smoke coming from the appliance. Extreme oil inefficiency is another sign. This part is a genuine OEM part designed for Echo or Mantis handheld yard tools such as a chainsaw, hedge trimmer, leaf blower, edger, pole pruner, or tiller engine. It does not ship with other parts. Any additional parts needed to install the piston ring must be ordered independently.

This genuine Echo retaining ring can be used as a replacement part for string trimmers, hedge trimmers, chainsaws, leaf blowers, and leaf vacuums. The function of a retaining ring for a small engine appliance is to fasten and limit the motion of a component by attaching it to a shaft or into a bore. A retaining ring can come loose and fall off, becoming lost. A retaining ring can also suffer damage over time in the form of punctures, piercings, or corrosion to the metal material that can preclude it from continuing to fasten components to shafts and bores. If this is the case, the damaged retaining ring should be immediately removed and replaced with this genuine OEM part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This retaining ring is compatible with the following brands: Echo, Little Wonder, and Shindaiwa.

This oil seal is used in a wide selection of lawn and garden equipment. It is used to prevent dust, water, dirt, and other contaminants from reaching important parts. It also helps retain lubrication so the motor can run without any issues. If the oil seals are no longer working correctly, it can allow the oil to leak out of the tool. Topping off the oil is an option, but replacing the seal will take care of the issue for good. If there is oil leaking from a pole saw or hedge trimmer, this is an indication that new oil seals may be needed. Sockets and wrenches will be needed to handle the replacement process. Drain the oil from the engine and remove the motor to get started. Take a look at the oil seals and how they are seated for replacing the seal later. A drill or a screw can be used to remove the old seal before putting the new one in. Designed for use with Echo, Little Wonder, Mantis, and Shindaiwa string trimmers, hedge trimmers, leaf blowers, tillers, edgers, and pole saws, this component is sold individually. It is a genuine OEM part that comes directly from the manufacturer.

This part is a crankcase gasket. The crankcase is the housing for the crankshaft, which is integrated into the engine block. The crankcase is split into two parts and the crankcase gasket creates a seal between the two halves.A new crankcase gasket may be needed if they are worn out or broken so there isn't a proper seal. It is recommended that the crankcase gaskets are replaced any time that the engine is serviced. This ensures that a proper seal is created when the engine is reassembled.This genuine OEM Echo part is sourced directly from the manufacturer and it is sold individually. This crankcase gasket is used on a variety of outdoor power equipment machines including hedge trimmers, leaf blowers, grass trimmers, edgers, pole saws, and brush cutters. It is compatible with outdoor power equipment that is manufactured by Shindaiwa, Echo, and Little Wonder.

This is a ball bearing that is made out of durable metal and used in a variety of lawn and garden equipment types. It fits in between a washer and a spacer in a tool to prevent excessive heat and friction between different components. The ball bearing takes the load and spins to help distribute weight while preventing friction so the tool runs at its best. When the ball or bearing retainer wears out, it can cause issues with the gardening tool. If it is located in a wheel, it can make it hard to turn.Wear is constant on ball bearings whenever a tool is in use, which means they over time they will start to experience issues and can wear out. Pressure, heat, vibration, and friction will take a toll over time. It's important to maintain the ball bearings and replace them whenever needed. This ball bearing is a genuine OEM replacement part that is sourced directly from the manufacturer. It's sold as an individual component. The part is designed for use with string trimmers, hedge trimmers, chainsaws, tillers, and pole pruners made by Echo, Little Wonder, Mantis, and Shindaiwa.

Gas-powered machines for the lawn or garden means rely on the machine's electronics to create a spark that causes an ignition inside of the combustion engine. Any engine is going to need air, fuel, and that spark to create power and it is the job of the spark plug to generate it. However, the spark plug needs a current to generate that spark, and that is where the ignition coil comes into play. When an engine is not firing, it may be that there is a problem with the ignition coil. This replacement part works in trimmers and pruners made by Little Wonder and Echo. This is an OEM replacement part that will require a screwdriver and wrench to replace. It includes the plastic casing as well as the properly fitted wires that send electrical energy to the spark. It ships individually.

Most lawn and garden machines operate on fuel, typically gas or a blend of gas and oil. The system for delivering fuel to the engine relies on fuel lines with durable seals and connections. The fuel grommet on many power tools is designed for use between the fuel tank and the filter. It is meant to secure the line and ensure there is no leakage and only minimal movement. This replacement fuel grommet is designed for Echo, Shindaiwa, LIttle Wonder, and other makes and models of lawn and garden gear. This includes trimmers, pruners, chainsaws, and many other small engine machinery. This is an OEM replacement part that will ship individually and will require pliers to install. It is important to ensure that this is the appropriate size and gauge for the machine in question prior to the repair.

It’s important to keep spark covers well maintained to prevent current leaking out from your spark plugs. The connection between the leads and the plug needs to be tight to keep the electric flow steady. Over time, spark plug covers can become dry and brittle. If the cover has failed, spark plugs will begin to go bad. Some signs of this are if your engine misfires or hard starts. Replacing the spark plug cover is as simple as removing the old cover and attaching a new one. This is an easy fix and shouldn’t require any special tools or additional parts. Be sure to let the engine cool completely before attempting any repairs. This genuine OEM part is a replacement spark plug cap for handheld gardening tools like chainsaws, leaf blowers, pole saws, hedge trimmers, edgers, chippers, shredders, sprayers, or tillers made by Echo, Mantis, or Shindaiwa. This item ships individually.

The spark plug cap spring is an important part of a handheld outdoor appliance’s ignition system. The spark plug makes a small electrical arc between two bits of wire, causing the ignition to combust, leading to the engine turning. But, to make sure there is good contact with the lead, you need a working spark plug cap spring. The spring holds the cap and plugs in place to ensure everything is grounded. With spark plugs, oil or carbon can build up in an aging engine and cause problems. If oil gets into the spark plug cap, the spring can come loose and the spark plug won’t work. This means the ignition will fail and the engine won’t start. This is an easy fix with this genuine OEM part sourced directly from the manufacturer. Just remove the cap and fish out the old spring with a pair of pliers. Replace it and reattach. It is compatible with Echo, Mantis, and Shindaiwa chainsaws, pole pruners, edgers, lawnmowers, tillers, and weed eaters. Sold individually.

This is a genuine ignition lead replacement manufactured for use in select models of lawn and garden equipment. The ignition lead is used to connect the ignition switch to the ignition module, allowing the engine to be started properly when it is engaged. Over time, this cable can become stretched or worn. It may also be damaged in an incident and need to be replaced. Either way, a genuine OEM replacement like this is essential. This part is manufactured to strict OEM standards by Echo. It can be used in several models of equipment from Echo, Shindaiwa, and Little Wonder. The ignition lead is compatible with trimmers, cultivators, edgers, hedge trimmers, and drills. It is sold as an individual unit and does not include any hardware or additional accessories. It is made of durable metal and rubberized cabling. To install the new ignition lead, simply disconnect the old unit from the ignition switch and module. Be sure to disconnect the power and let the engine cool first before getting started. Once the old lead has been removed, the new cable can be installed so that the unit is functional again.

This clutch shoe can be used as a replacement part for hedge trimmers, string trimmers, or tillers. The clutch shoes are bound together by the clutch spring through consistent tension and are integrated into the equipment's clutch system. A clutch shoe engages the clutch bell once the engine has reached a certain speed and avoids engaging the clutch bell when the engine is idling.A clutch shoe can be worn down over time or can suffer damage from puncturing, piercing, erosion of the metal material, or direct impact with a hard object thereby warping the material. If the clutch shoe is damaged, the clutch bell will be engaged even when the engine is idling. The broken or malfunctioning clutch shoes should be removed and replaced with this genuine OEM replacement part immediately before using the outdoor appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This clutch shoe is a genuine Echo part, sold individually. It is compatible with the following outdoor appliance brands: Echo, Mantis, Shindaiwa, and Little Wonder.