Estate Dryer Switch

Best Seller

Genuine Whirlpool part

Estate Dryer Door Switch

By: Whirlpool

Part Number: WP3406107

The Dryer Door Switch is an OEM replacement part for Whirlpool dryers. It is a crucial safety component that monitors the opening and closing of the dryer door, preventing the dryer from operating when the door is open.

Symptoms of a faulty Dryer Door Switch include:

The dryer failing to start or operate with the door closed
The dryer continuing to run or heat even when the door is open
Error codes or warning lights related to the door switch sensor

Causes of a bad door switch can include normal wear and tear over time, physical damage from mishandling or impact, or electrical malfunctions.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

This part fixes the following symptoms

Doesn't shut off
Won't start
Will not tumble

Do-It-Yourself Stories from Customers like You Ignitor coil was not turning on Harrison N. • El Cajon , CA • March 14, 2021

I realized my load of laundry was still wet after a normal drying cycle. My first action was to turn the dryer on (2010 gas Maytag centennial) and open the front port to look at the ignitor coil. It never turned orange so I knew there must be a problem with the primary circuit. I shut off the dryer, disconnected the power, pulled it away from the wall, shutoff the gas, and removed the back panel. I then disconnected the wires for the thermal fuse and checked its resistance with a multimeter.... Read more

$26.95

Compare At:: $31.80
You Save:: $4.85

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Washer Lid Switch

4.9 (661)

By: Whirlpool

Part Number: 3949247V

The Washer Lid Switch is an OEM replacement part for Whirlpool washers. It is an electronic component located inside the washer lid that detects when the lid is open or closed in order to activate the necessary functions during the wash cycle.

Symptoms of a bad Washer Lid Switch include:

The wash cycle will not start even when the lid is closed
Error codes displayed related to the lid being open
Inability to advance through cycle selections
Flashes or other improper lid switch behavior

Causes of a bad lid switch can be normal wear and tear over time. Moisture exposure may also contribute to internal component failure.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not drain
Won't start
Will not fill with water
Lid or door will not open

Do-It-Yourself Stories from Customers like You Our washer wouldn't rinse spin or drain Jan C. • Somerville , MA • April 23, 2015

My son was doing his laundry, only to announce that the washer wouldn't rinse, spin or drain. I looked on line at new washers and was staggered to see how much they cost, our Whirlpool is 20 years old! Then I looked on Craig's list to see about getting a used washer, but when I found something that looked good, and looked up how it performed, most of them had terrible reviews. So, I looked at a video that told about the 5 most common things to go wrong and figured out it was a broken lid... Read more

$38.95

Compare At:: $46.35
You Save:: $7.40

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Door Switch

4.9 (98)

By: Whirlpool

Part Number: W10820036

The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.

Symptoms of a failing Washer Door Switch include:

The washer not starting or stopping unexpectedly during a cycle
Error codes related to door closure issues displayed on the washer's control panel
The washer door not locking properly or the lock mechanism not engaging
The washer continuing to operate with the door open

Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.

This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

This part fixes the following symptoms

Will not drain
Pumps but will not spin
Timer will not advance
Doesn't shut off

Do-It-Yourself Stories from Customers like You Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016

The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new... Read more

$20.95

Compare At:: $32.43
You Save:: $11.48

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Dryer Door Switch Assembly

4.9 (159)

By: Whirlpool

Part Number: WP3406105

The Dryer Door Switch Assembly is an OEM part for Whirlpool dryers. This component is responsible for detecting when the dryer door is open to prevent the dryer from operating during this state. It ensures safety and energy efficiency by halting the drying cycle if the door is accidentally opened, preventing heat loss and potential hazards.

Causes for a malfunctioning dryer door switch assembly include physical damage from slamming the dryer door, wear and tear from regular use, or electrical issues that impair its function.

Symptoms of a bad Dryer Door Switch Assembly include:

Dryer not starting when the door is closed
Dryer continuing to operate when the door is opened
The dryer starting intermittently or requiring the door to be slammed to start

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Doesn't shut off

Do-It-Yourself Stories from Customers like You Roper dryer stops working then heater runs in all cycles including no heat Eric L. • Hendersonville , TN • January 12, 2015

Background: Roper Electric Dryer model REX6634RQ0 purchased new in early 2006 by my wife. Dryer use profile is low to moderate as it was used by only one person (working from home) from 2006 to late 2007 then moved and stored in a dry basement until mid 2009. Moved and used by primarily just two people (plus occasional children visits) from mid-2009 thru late 2011 with three moves involved with in that time. Then stored in a dry shipping container until moved again in 2013. The multiple... Read more

$26.95

Compare At:: $31.80
You Save:: $4.85

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Dryer Push To Start Switch

4.9 (58)

By: Whirlpool

Part Number: WP3977456

The Push to Start Switch is an OEM part for Whirlpool dryers. It is responsible for initiating the drying cycle when pressed, sending an electrical signal to start the dryer.

You should replace this push to start switch if it becomes defective. Causes of a bad switch can include electrical failures, physical damage from repeated use, or internal wear over time.

Symptoms of a bad push to start switch include:

The dryer not starting when the button is pressed
The need to press the button multiple times to start the dryer
No response or clicking sound when the button is pressed

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For square top push to start switch, use part number W10156101.

Do-It-Yourself Stories from Customers like You Push button start as soon as you let go of button dryer would stop Richard S. • Poultney , VT • February 27, 2016

Replaced the duct tape with a new switch Read more

$28.26

Compare At:: $33.91
You Save:: $5.65

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Start Switch

4.8 (37)

By: Whirlpool

Part Number: WP3398095

The Start Switch is an OEM part for Whirlpool dryers. This switch initiates the dryer's cycle, signaling the dryer to begin its drying process. Made with precision to fit specific Whirlpool models, this start switch ensures reliability and performance. Over time, wear and tear or electrical issues can impact the switch's functionality, leading to potential problems with starting the dryer.

Causes of a bad start switch can range from electrical faults within the switch itself, wear and tear from repeated use, or physical damage that affects the switch mechanism.

Symptoms of a bad Start Switch include:

The dryer not starting when the start button is pressed
Intermittent operation or failure to maintain the cycle once started
Unusual noises when the start button is pressed

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Clothes dryer woundnt start start switcw n/g John S. • Cutchogue , NY • May 17, 2014

Remove and replace Read more

$59.95

Compare At:: $71.34
You Save:: $11.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Start Switch

5.0 (18)

By: Whirlpool

Part Number: WP3404233

The Start Switch is an OEM part for Whirlpool dryers. This switch is essential for initiating the drying cycle, allowing the user to start the dryer by pressing the button. It ensures the dryer begins operation and runs through the selected cycle properly.

Causes of a bad start switch can include electrical issues such as short circuits, mechanical wear from frequent use, or damage due to moisture or impact.

Symptoms of a bad start switch include:

The dryer not starting when the button is pressed
Intermittent operation or the need to press the button multiple times to start the dryer
No response or sound when the start button is engaged
The start button feeling loose or not clicking properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Timer & start switch had failed on my whirlpool dryer Richard H. • Davenport , FL • November 07, 2014

Identified the parts I needed on the AppliancePartsPros.com website using the Dryer model number. Delivery was within 3 days by courier - excellent. Parts fitted, console reassembled and my dryer was back up and running within 40 minutes. No more intermittent problems with the timer not working - brilliant!! Read more

$48.95

Compare At:: $58.25
You Save:: $9.30

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Start Switch

4.9 (16)

By: Whirlpool

Part Number: WP3395382

The Start Switch is an OEM replacement part for Whirlpool dryers. It is an electronic component responsible for initiating the heating elements and tumble cycles upon user command from the control panel.

Causes of a bad start switch involve general wear over extended use. Failure of the internal conducting surfaces interrupts circuit activation as well.

Symptoms of a bad start switch include:

Heating elements or tumble cycles that will not engage properly
Dryer fails to operate or stops mid-cycle unexpectedly
Control panel appears non-responsive to selections
Error codes related to ignition or power delivery faults

Note: This dryer push-to-start switch has 2 terminals.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric dryer models.

This part fixes the following symptoms

Doesn't shut off

Do-It-Yourself Stories from Customers like You Dryer wouln't start heard the timer working but the starter wouldn't start Perry B. • Stockton , CA • December 05, 2014

I replaced the starter switch, that really didn't need to be replaced, and the thermal fuse, which did. Read more

$44.95

Compare At:: $53.49
You Save:: $8.54

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Temperature Selector Switch

4.9 (12)

By: Whirlpool

Part Number: WP3399639

The Temperature Selector Switch is an OEM replacement part for Whirlpool dryers. This electro-mechanical switch allows consumers to choose between heat settings that adequately dry different fabric types.

Causes of a damaged selector switch can include regular wear from hundreds of cycles over the appliance's lifetime. Mineral deposits accumulating inside linkage mechanics may cause rotational movements to stiffen. The physical impacts of shifting internal contact positions could potentially lead to switching issues as well.

Symptoms of a faulty temperature selector involve:

Inability to change heat level for desired drying performance
Temperature remaining stuck on highest or lowest settings
Lint filter or duct cleaning lights failing to illuminate properly

This OEM replacement is compatible with some Kenmore and KitchenAid electric dryer models too.

Do-It-Yourself Stories from Customers like You 1 no heat on high or low settings and sometimes on medium heat setting 2 no auto cool down Robert H. • Renton , WA • March 11, 2015

I replaced the cycle switch, fixing the lack of heat. The timer switch replacement fixed the auto cool down. I watched a cycle switch replacement on Youtube, demonstrating removal of the top console, which answered the only question I had about the repair. The timer switch was a hundred bucks. The only thing to be said about that is that it was a lot cheaper than a repairman or replacing the dryer. Read more

$53.95

Compare At:: $64.20
You Save:: $10.25

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Water Level Pressure Switch

4.8 (17)

By: Whirlpool

Part Number: W10335056

This water level pressure switch monitors the washer's tub water level through the air-pressure hose and signals the control when to stop filling. Replacing a faulty switch helps restore accurate fills and consistent cycle progress.

Senses air pressure from the tub to determine water level
Signals the control to start/stop filling and advance the cycle
Common symptoms of a failed switch: fills too little or too much, stops filling early, won't advance into wash/spin, or shows water-level error codes
Helps protect against overfill conditions when operating correctly

What's included: 1 water level pressure switch Install notes:

Disconnect power and shut off water supplies before servicing
Access through the control/console area; note hose and connector orientations
Transfer the pressure hose and wire harness; ensure an airtight hose fit with no kinks or cracks, and clear any water/debris from the hose
With the tub empty, run a quick fill test to ensure proper shutoff and cycle progression

This part fixes the following symptoms

Will not stop filling with water
Will not fill with water

Do-It-Yourself Stories from Customers like You Washing machine wouldn't fill water to the correct level it filled as if it were set to "small load" every time Jessica A. • Baltimore , MD • April 13, 2014

I took the washer apart and replaced the water level switch and hose with new ones. I followed the video that I found on youtube (which is on the site) and had no problems at all. Read more

$56.95

Compare At:: $68.34
You Save:: $11.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Switch - Door

5.0 (21)

By: Whirlpool

Part Number: WP3406102

The Door Switch is an OEM part for Whirlpool dryers. This part detects whether the dryer door is open or closed and ensures the dryer operates only when the door is securely closed.

Causes of a bad door switch can include regular wear and tear, electrical malfunctions, or physical damage from repeated use.

Symptoms of a bad door switch include:

Dryer not starting
Dryer stopping mid-cycle
Indicator lights not functioning correctly
Dryer continuing to run even when the door is open

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Door switch on dryer was not working dryer would continue to run when the door was opened Jeff W. • Knoxville , IA • September 04, 2015

Simple unplug, unscrew and replace. Read more

$31.39

Compare At:: $37.35
You Save:: $5.96

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Estate Resistor

5.0 (10)

By: Whirlpool

Part Number: 279872

This fixed-value resistor is an electrical component used in select dryers to limit current in a specific control circuit. It helps the timer or electronic control operate correctly by dropping voltage to safe, design-intended levels.

Provides precise resistance to reduce voltage/current in the designated dryer circuit
Supports proper operation of the timer, control board, or end-of-cycle signal (varies by model)
Failure may present as a timer that won't advance, an inoperative signal/buzzer, or irregular cycle behavior
Replace if visibly burned/damaged or if testing shows an open or shorted condition

What's included: One resistor Install notes:

Disconnect power to the appliance before servicing
Access the console/wiring harness and note original wire routing
Make secure, insulated connections and route the resistor/leads exactly as original to avoid heat or chafing
After installation, run a test cycle to ensure proper operation of the affected function

Do-It-Yourself Stories from Customers like You Timer wouldn't advance on my dryer John L. • Oblong , IL • March 22, 2016

I ordered a new timer and installed it with the help of the videos provided and this did not solve my problem so I chated with the pros @ Appliance Parts Pros and told them my problem and they told me the problem and recommended the part I needed and With the incredibly fast shipping I had the part the next day. I installed it and now my dryer timer works great.Thanks to APPs for their help and ease of ordering and fast shipping. I highly recommend AppliancePartPros and will definitely use... Read more

$46.95

Compare At:: $55.87
You Save:: $8.92

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Estate Push-To-Start Switch (On/Off)

5.0 (3)

By: Whirlpool

Part Number: WP8543274

This push-to-start switch momentarily closes the start circuit to begin a cycle. Replacing a worn switch restores reliable starting when you press the Start button.

Initiates operation by closing the start circuit when pressed
Works with the door switch and timer/control to begin a cycle
Common symptoms: won't start when Start is pressed; runs only while the button is held; intermittent starting; Start button feels loose or sticky
Also known as an on/off PTS or start button switch

What's included: 1 push-to-start switch Install notes:

Disconnect power before servicing
Access the console/control panel and remove the start knob or button if present
Move wires to the new switch one at a time to maintain correct terminal positions
Secure the switch in the panel, reassemble, and test Start function

Do-It-Yourself Stories from Customers like You Start switch replacement George Z. • Sebastian , FL • December 14, 2020

I have an old dryer. My wife wanted a new washer and dryer but I keep repairing the old ones. Not because I have to, but because I want to, it's personal now. Can't let my old dryer beat me down. We have pushed that old Start-Stop switch so many times it just wore out. Bing-bang-boom...it was simple. Read more

$51.27

Compare At:: $60.50
You Save:: $9.23

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Estate Adjustable Buzzer Kit (Mini Buzzer)

5.0 (2)

By: Whirlpool

Part Number: WP694419

This adjustable buzzer kit replaces a failed or noisy mini buzzer to restore audible alerts for cycles, timers and notifications. Compact design lets the appliance signal you reliably when cycles finish or need attention. What it does:

Produces audible tones for cycle end, timers and other appliance notifications
Replaces buzzers that are silent, intermittent, weak or emitting erratic beeps
Helps you hear and identify completed cycles and timed alerts
Small, mountable unit that fits behind the control panel and connects to the control board

What's included:

One adjustable buzzer kit

Install notes:

Disconnect power before servicing to avoid shock risk
Access may require removing the control panel; keep fasteners organized for reassembly
Disconnect the buzzer wiring harness or connector before removing the old unit; connect the new buzzer the same way
Test buzzer function with power restored before fully reassembling

Do-It-Yourself Stories from Customers like You Replaced buzzer and heating element. Charles B. • Sioux Falls , SD • August 26, 2018

I watched the repair video AppliancePartsPros.com had on each repair and followed the instructions. Read more

$64.22

Compare At:: $77.06
You Save:: $12.84

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Estate Switch, Rocker

5.0 (1)

By: Whirlpool

Part Number: WP4314961

Color: Black. Instruction sheet included.

Do-It-Yourself Stories from Customers like You The dense pack rocker switch on our whirlpool compactor broke after 28 years Jane G. • Hubbardston , MA • August 21, 2016

Removed rocker switch,made up jumper so the compactor could be used while awaiting replacement switch. The part came 2 days later and was installed in less tha 5 minutes. Unit working like new again. Thanks for the great service!! Read more

$47.95

Compare At:: $56.58
You Save:: $8.63

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Estate Signal Switch (Push-Button), Single

By: Whirlpool

Part Number: 3399638

A push-button signal switch that completes the user input circuit to the control board so selections register and the appliance responds to commands. Replaces a worn or unresponsive front-panel switch to restore reliable button operation. What it does:

Sends the user's button press signal to the control board so commands are recognized
Commonly replaced when front-panel buttons are unresponsive or intermittently work
Helps restore proper cycle selection and control responsiveness
Works as the user-input contact in the control/display assembly

What's included: One signal switch. Install notes:

Disconnect power before starting repair to avoid shock or injury.
Access the control panel per your model's service instructions; handle the display and wiring gently.
Verify connector orientation and secure all harness connections before reassembling.
Test operation after reassembly to confirm the new switch functions correctly.

$59.64

Compare At:: $70.97
You Save:: $11.33

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Estate dryer Switch replacement parts play a critical role in keeping your dryer running smoothly. These small but significant components ensure that your appliance operates safely and efficiently. In the hustle and bustle of daily life, a functional dryer is a household essential, and having reliable replacement parts on hand is a must.

Estate dryer Switch parts are indispensable for maintaining the machine's operability. They are designed to manage the electrical flow within the appliance, enabling it to start and stop when needed. Replacing a worn or faulty switch can prevent potential issues and prolong the lifespan of your dryer. Using high-quality OEM replacement parts guarantees compatibility and performance, offering peace of mind that your dryer will continue to function as intended.

With the availability of Estate dryer Switch replacement parts, you can be confident in the reliability and durability of your appliance components. Investing in these parts is a smart move to ensure your dryer remains an efficient and vital part of your home.

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Estate Dryer Switch

Estate Dryer Door Switch

Estate Washer Lid Switch

Estate Door Switch

Estate Dryer Door Switch Assembly

Estate Dryer Push To Start Switch

Estate Start Switch

Estate Start Switch

Estate Start Switch

Estate Temperature Selector Switch

Estate Water Level Pressure Switch

Estate Switch - Door

Estate Resistor

Estate Push-To-Start Switch (On/Off)

Estate Adjustable Buzzer Kit (Mini Buzzer)

Estate Switch, Rocker

Estate Signal Switch (Push-Button), Single

Common Problems