Parts for Generac 5940-0: Frame Assy Parts

This fuel filter is a very important piece of hardware designed for use with outdoor lawn and garden power equipment, specifically for Generac portable generators.The fuel filter part is crucial to keep the carburetor of the portable generator as healthy and functional as possible. The purpose of the fuel filter is to ensure that the fuel being supplied to the carburetor of the portable generator is completely free of dirt, debris, and other contaminants. Over time and with exposure to the elements, it is natural that the fuel filter will become dirty or get clogged. This is problematic because it restricts the fuel flow, and in the scenario where the engine is not getting enough fuel, the portable generator will not operate properly. If this happens, it means it is time to replace the fuel filter. The replacement or repair process of the fuel filter should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This fuel filter is made out of durable plastic and is designed to go in the body of the portable generator by Generac. The fuel filter is an original OEM part sourced directly from the manufacturer, Generac. It is sold individually.

This is a high-quality anti-vibration mount that is located on many Generac portable generators. The anti-vibration mount is seated between the frame and motor and is not the same as the rubber mount found under the frame itself. The purpose of the anti-vibration mount is to cut down on the amount of vibration that the motor can put out. If this part is damaged or starts to malfunction, the generator may begin to make more noise or create more vibration than it previously did. It will need to be replaced to get the generator back into good shape.This part is simple to replace and requires only basic tools and work gloves. First, make sure the generator is unplugged and turned off. Gain access to the frame motor and locate the anti-vibration mount. It can be removed before a new part is placed in the same location. If there is more than one mount, replacing them at the same time is recommended.The anti-vibration mount is a genuine OEM replacement part that is directly sourced from the manufacturer. It is made to be used with Generac generators and is sold on an individual basis.

This part is a replacement vibration isolator. This part can be used to replace a broken or detached vibration isolator in generators. Vibration isolators work dampen the vibration emitted from the generator during use. This part attaches to the bottom of the frame leg support. If the vibration isolators are detached, worn, or broken, they will need to be replaced. When working on or near an engine, it is important to ensure that it is powered off and completely cool before beginning any repairs.As an authentic replacement part from Generac, this vibration isolator is suitable for use on generators that have been manufactured by Generac, Siemens, Honeywell, and other brands. This is a genuine OEM part made of high-quality, durable materials and is sold individually.

This exhaust gasket is an authentic OEM part sourced directly from the manufacturer specifically for use on Generac generators. The exhaust gasket seals the connection between the exhaust manifold and the side of the engine. The gasket prevents exhaust gasses from leaking out and prevents contaminants from coming into the exhaust system. If the generator's engine starts sounding very loud, loses power, has a burning smell, or loses fuel efficiency, the exhaust gasket could be worn and need to be replaced. All gaskets should be inspected on a regular basis to maintain the life of the generator.Allow the generator to cool before working on it. Wear safety gloves and remove the spark plug for safety. Use a screwdriver and remove the muffler housing. Next, remove the muffler and exhaust pipe. Pull the exhaust gasket off and install the new gasket. Reassemble the generator using reverse steps. Install the spark plug and start the generator to ensure it is back together correctly.This exhaust gasket is sold individually and is the muffler side gasket. This gasket is designed specifically for Generac generators.

This part is a replacement wheel. It allows portable generators to easily be moved and maneuvered.With regular use, wheels will wear down and can become damaged and thus will require replacement if flat, dented, bent, worn, or ineffective in any way. When working on or near an engine, it is important to ensure that it is powered off and completely cool before beginning repairs.This is a genuine OEM part made by Generac and has been sourced directly from the manufacturer. It is sold individually. As an authentic replacement part, this wheel is suitable for use on portable generators manufactured by Generac, Honeywell, and Siemens.