Parts for Ge ESH22XGPBBB: 03 - Freezer Section Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Set of 12 size 8-18 mounting screws for dishwashers. Replaces lost, stripped, or missing screws for secure installation of handles and components.

Replacement 8-18 x 9/16 machine screw for securing panels, brackets, and internal components. Needed when fasteners are stripped, missing, or worn.

Seals freezer air duct to maintain proper temperature and airflow. Replace if frost builds up or cold air leaks. Verify fit with your model number.

Refrigerator freezer duct gasket seals the air passage between compartments. Replace if torn or loose to restore proper cooling and prevent frost buildup.

Replacement freezer air duct for refrigerators. Directs cold air from evaporator to freezer compartment. Order new duct if cracked, broken, or missing.

Mounting screw for refrigerator interior components like fan brackets, ice maker assemblies, and shelving. Replace if stripped, missing, or corroded.

Push fastener secures refrigerator shelf supports and slides in place. Replace if the original fastener is cracked, broken, or missing.

This shelf support secures an interior refrigerator shelf in place so food items stay level and storage remains organized. It replaces a cracked or worn support to restore proper shelf seating and stability. What it does

• Holds a refrigerator shelf or shelf trim in the correct position to prevent sagging or tipping
• Restores stable support for glass or wire shelving that no longer stays seated
• Helps eliminate shelf movement that can cause items to slide or spill
• Works where a broken, chipped, or missing support prevents proper shelf alignment

• Disconnect power to the appliance before starting any repair and empty the shelf area
• Remove the affected shelf or trim to access the support; reinstall shelf to confirm correct seating
• Use basic hand tools as needed and avoid forcing parts to prevent further damage
• Replace all affected pieces for consistent shelf alignment

Refrigerator not cooling but freezer works? Frost buildup on back wall? Your evaporator may need replacement. Moderate difficulty repair for most models.

Freezer icing up or frost buildup? This defrost heater melts accumulated ice on evaporator coils. Moderately difficult repair requires panel removal.

Freezer coils icing up and fridge too warm? This defrost thermostat monitors evaporator temperature to prevent overheating. Easy 20-minute DIY fix.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

The Front Roller Assembly is an OEM part for GE refrigerators. It's designed to support the front part of the refrigerator, allowing for smooth and easy movement when you need to shift the appliance for cleaning, maintenance, or repositioning. This roller assembly ensures the weight of the refrigerator is evenly distributed, reducing strain on the floor and making it easier to move the refrigerator without damaging the flooring or the appliance itself.

Causes of a bad Front Roller Assembly can include wear and tear from regular use, damage from moving the refrigerator improperly, or corrosion over time. 

Symptoms of a bad Front Roller Assembly include:

• Difficulty moving the refrigerator
• Uneven positioning or tilting of the refrigerator
• Excessive noise or resistance when attempting to move the appliance
• Visible wear or damage to the rollers

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Corner cap for side-by-side refrigerators. Covers exposed corners on cabinet edges. Replace if cracked, broken, or missing for a finished look.

Protective cover for the freezer thermistor sensor in side-by-side refrigerators. Replace if cracked, broken, or missing to shield the sensor.

Base grille assembly for refrigerators. Installs at the bottom front of your unit. Replace if cracked, broken, discolored, or missing for a clean look.

Secures the lower front grille or trim panel to prevent rattles and gaps. Replace when clips break or go missing for a snug, aligned fit. Verify compatibility.

Replacement mount bracket that secures the bar/curb assembly in your side-by-side refrigerator. Needed when original is cracked, broken, or missing.

Refrigerator light not working? This light bulb socket holds the bulb securely and provides electrical connection. Easy DIY repair with video guide.

Illuminates your refrigerator interior. Replace when burned out or flickering. Appliance-rated for durability. Verify wattage and base type match.

Black

Hex head mounting screw for refrigerator door hinges. Replace lost, stripped, or missing hardware when installing or reattaching refrigerator doors.

12-24 CA HX 7/8 S

Secures the hinge cover to your refrigerator door or cabinet hinge. Replace this screw if it's missing, stripped, or damaged to stop the cover from loosening.

Protective cap that covers the evaporator fan motor bearing and housing in freezers and refrigerators. Replace if cracked, broken, or missing to prevent debris.

Fixes freezer or fridge light staying on, or ice dispenser not working when door closes. Simple 5-minute DIY fix with putty knife—video included.

Fix a refrigerator not cooling with this evaporator fan motor. Circulates cold air throughout fridge and freezer for uniform cooling and temperature control.

Secures the evaporator fan motor to the refrigerator cabinet. Replace if your original bracket is bent, broken, or cracked to restore proper mounting.

Secures the evaporator fan motor to the freezer evaporator assembly. Replace if cracked, broken, or causing motor vibration and noise issues.

Rattling noise or warm temps? A broken evaporator fan blade disrupts air circulation. This repair takes 30-45 minutes with basic tools and our video guide.

Rubber bumper that cushions and mounts the evaporator fan motor assembly. Replace if cracked, deteriorated, or missing to reduce vibration and noise.

Rubber grommet that mounts and cushions the evaporator or condenser fan motor. Replace if cracked, worn, or missing to prevent vibration and noise.

Secures and seals water line connections in your refrigerator's dispensing system. Replace if leaking or loose to prevent water damage. Confirm fit.

Secures water tube to cabinet, preventing kinks and flow issues. Replace if tube is loose, vibrating, or causing noise. Confirm fit with your model number.