Parts for Ge PSC23MSWCSS: 06 - Freezer Shelves Parts

The GE refrigerator water filter is an OEM replacement part responsible for removing impurities and contaminants from the water supply in the refrigerator. The filter is specifically designed to effectively filter out various potentially harmful contaminants. The water filter connects to the water line, ensuring that the water dispensed from the refrigerator's water dispenser or used for ice making is clean, clear, and free from unwanted particles or odors.

The GE refrigerator water filter can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms:

• Foul odor or unpleasant taste in the dispensed water or ice cubes
• Reduced water flow from the dispenser
• Visible discoloration or particles in the water
• Decreased effectiveness in filtering out contaminants
• Filter replacement indicator light or message appearing on the refrigerator display
• Filter lifespan reaching its expiration date

Size: 10-32 GXTT FLP.595 S

This silicon controlled rectifier (SCR) is a replacement control semiconductor that helps regulate power to heating elements and motors, restoring proper cycle control and heat delivery in compatible appliances. What it does:

• Controls and chops AC power to heating elements or motor circuits for variable heat/speed control
• Can stop intermittent or no-heat conditions caused by a failed SCR in oven, range, or similar appliances
• Helps restore stable thermostat/regulation behavior when the original SCR is not switching correctly
• Commonly used where precise power control is required in the appliance's control board or module

• One silicon controlled rectifier (SCR) as shown

• High-level, service-only replacement — disconnect power before starting work
• Verify correct part number on the appliance and transfer heat sinks or mounting hardware if required
• Use proper ESD precautions when handling semiconductor components

This replacement painted #8-18 screw secures panels and components on select appliances, restoring proper fit and reducing vibration. Use it when original fasteners are missing, stripped, or corroded to help keep parts aligned and stable. What it does:

• Fastens trim, panels, brackets, and small components in appliance assemblies
• Replaces stripped, rusted, or missing #8-18 fasteners that cause loose parts
• Helps eliminate rattles and misalignment from loose or damaged screws
• Matches the painted finish for a cleaner, OEM-like appearance

• Use the correct driver bit and avoid over-torquing to prevent stripping
• Inspect mating threads and replace if damaged before installing
• Disconnect power to the appliance if working near electrical components; follow all safety precautions

The Handle is an OEM replacement part for GE refrigerators. It is the outer component that allows for opening and closing access to the refrigerator or freezer compartment drawer.

Causes of a bad handle can include normal wear over time as handles experience constant friction from opening and closing.

Symptoms of a bad handle include:

• Loose, sagging, or unstable grip that does not feel secure
• Broken, cracked, or disconnected parts
• Chipped or faded surfaces affecting the appearance
• Difficulty or inability to open the drawer

This GE replacement part is specifically designed to provide a long-lasting replacement. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This fixed freezer shelf restores a sturdy, level storage surface in the freezer compartment. Replace a broken or missing shelf to regain organization, correct spacing, and full storage capacity.

• Provides a fixed-position storage surface inside the freezer
• Helps keep items level, organized, and easy to access
• Restores proper spacing with adjacent shelves, drawers, or baskets
• Replaces a cracked, warped, or missing shelf

• Disconnect power before servicing; wear gloves to protect hands
• Empty the area, then align the shelf with the side-wall slots or supports
• Slide or place the shelf into the supports until fully seated and level
• Distribute weight evenly and avoid overloading after installation

This freezer shelf trim replaces a damaged or missing edge piece on the freezer shelf. It attaches to the shelf/frame to provide a finished lip that helps contain items and restores the shelf's original fit and appearance.

• Provides the finished edge on a freezer shelf to help keep items from sliding off
• Attaches to the shelf/frame for a secure, correct fit
• Replace when cracked, warped, loose, or missing
• Common symptoms include a broken or jagged shelf edge, trim that won't stay attached, or items slipping off the shelf

• Unplug the refrigerator and remove items from the affected shelf
• Remove the shelf if needed; release and remove the old trim
• Align the new trim with the shelf/frame and press until fully seated and secure
• Do not force parts together; inspect the shelf/frame for damage before reassembly

This adjustable freezer shelf replaces a damaged or missing shelf to restore organized storage and keep items from shifting. It fits inside the freezer compartment and provides a stable, repositionable surface for frozen goods. What it does:

• Replaces bent, broken or missing freezer shelving so food can be stored securely
• Allows height adjustment to accommodate taller or stacked items
• Helps maintain even airflow around stored items by keeping contents organized
• Reduces items falling or shifting when the door is opened

• Slide shelf into the designated cabinet rails or clips until seated; avoid forcing
• Confirm correct shelf orientation and secure support locations before loading
• Wear gloves to protect hands from sharp edges during handling

This slide-out freezer shelf restores smooth access and sturdy storage in the freezer compartment. Replace a cracked, missing, or hard-to-move shelf to keep frozen foods supported, organized, and within easy reach.

• Provides a gliding storage surface in the freezer compartment
• Supports and organizes frozen foods for easier access to items in back
• Restores proper fit and sliding action when the original shelf is damaged or binding
• Typical signs you need this part: cracked/broken or missing shelf, sticking or uneven slide

• Empty the shelf and remove any obstructing bins or baskets
• Align rear tabs/pegs with the freezer slots or rails, then lower the front into place
• Ensure the shelf seats fully and slides smoothly before reloading food
• Handle edges carefully; consider wearing cut-resistant gloves

This replacement freezer wire basket restores organized storage and easy access to frozen foods. It snaps into existing shelf supports to keep loose items contained and make loading and unloading simpler. What it does:

• Holds and contains frozen foods and packaged items to prevent shifting
• Restores usable storage space when the original basket is broken or missing
• Keeps small or loose items grouped for easier access
• Helps maintain an orderly freezer so items are easier to find

• Install on the appropriate shelf supports or rails; verify correct orientation before seating
• No special tools typically required; lift and engage the basket into place
• Handle carefully to avoid bending the wire or damaging adjacent components

The Handle is an OEM replacement part for GE refrigerators. It is the outer component that allows for opening and closing access to the refrigerator or freezer compartment drawer.

Causes of a bad handle can include normal wear over time as handles experience constant friction from opening and closing.

Symptoms of a bad handle include:

• Loose, sagging, or unstable grip that does not feel secure
• Broken, cracked, or disconnected parts
• Chipped or faded surfaces affecting the appearance
• Difficulty or inability to open the drawer

This GE replacement part is specifically designed to provide a long-lasting replacement. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This support slide secures and guides a refrigerator freezer basket so it opens and closes smoothly. It replaces worn or broken slides to restore proper basket movement and prevent sagging or jamming. What it does:

• Guides the basket along its track for smooth in-and-out motion
• Supports basket weight to prevent tilting or sagging
• Replaces worn, cracked, or damaged slides that cause sticking or misalignment
• Helps reduce noise from a loose or unstable basket

• Disconnect power to the appliance before beginning repair
• You may need to remove the basket to access the slide; keep fasteners for reassembly
• Install by aligning the slide in its track and securing any clips or screws as required

This left-side basket support slide holds and guides a refrigerator's slide-out basket, restoring smooth movement and proper alignment so the basket opens and closes without sagging or binding. What it does:

• Supports the left side of a slide-out refrigerator basket or drawer
• Guides the basket along its track for smooth, controlled sliding
• Prevents sagging, misalignment, or catching when opening or closing the basket
• Helps maintain even spacing and stable basket seating during use

• One left-side support slide

• Disconnect power and remove food/ice from the area before starting
• Typical installation involves removing the drawer, aligning the slide, and securing it in the existing mounts or clips
• Use basic hand tools; do not force parts into position—verify proper seating and smooth operation before reassembly

This left-side slide and bracket assembly supports a refrigerator shelf or drawer slide, restoring smooth, stable movement and proper alignment. It replaces a damaged or worn left slide bracket to help drawers and shelves operate correctly. What it does:

• Provides a mounting point and sliding track for a left-side shelf or drawer
• Restores smooth in-and-out motion when the original bracket is cracked, bent, or broken
• Prevents shelf or drawer from sagging, catching, or becoming misaligned
• Works with the matching right-side slide/bracket to ensure balanced operation

• Basic hand tools may be needed; follow manufacturer instructions for safe removal and replacement
• Power down and empty the shelf/drawer before starting to avoid injury or damage
• Inspect mating hardware and the matching right-side bracket for wear and replace both if needed to ensure proper alignment

This right-hand slide and bracket assembly supports and guides a refrigerator drawer so it opens and closes smoothly. Replaces a worn or damaged slide to restore alignment and reduce sticking or wobbling of the drawer. What it does:

• Provides guided support for the right-side refrigerator drawer or bin
• Replaces broken, bent, or worn slide hardware that causes sticking or misalignment
• Helps restore smooth, quiet operation and proper drawer seating
• Prevents drawer sag and reduces binding when opening or closing

• Disconnect power to the appliance before starting any repair.
• Remove drawer/bin per the appliance manual to access mounting points; retain fasteners unless new ones are specified.
• Inspect mating slide and bracket on the cabinet for damage and clean mounting surfaces before installing.
• Use basic hand tools; check alignment and smooth operation before returning the drawer to service.

This lid bumper cushions your washer lid where it meets the top panel, softening closure and protecting the finish. Replacing worn or missing bumpers reduces slamming and rattles for a quieter, smoother close.

• Cushions contact between the lid and top panel to reduce slamming noise
• Protects painted/enamel surfaces from chips and scratches at contact points
• Helps the lid sit level and minimizes vibration or rattling
• Replace if the bumper is missing, cracked, flattened, or hardened

• Disconnect power to the washer before servicing.
• Open the lid and locate the bumper(s) at the front corners (on the lid underside or top panel lip).
• Pull the old bumper straight out; clean the mounting hole.
• Press the new bumper firmly into the hole until fully seated and flush; test lid closure.