Parts for Ge PSC23MSWCSS: 03 - Fresh Food Door Parts

The GE refrigerator water filter is an OEM replacement part responsible for removing impurities and contaminants from the water supply in the refrigerator. The filter is specifically designed to effectively filter out various potentially harmful contaminants. The water filter connects to the water line, ensuring that the water dispensed from the refrigerator's water dispenser or used for ice making is clean, clear, and free from unwanted particles or odors.

The GE refrigerator water filter can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms:

• Foul odor or unpleasant taste in the dispensed water or ice cubes
• Reduced water flow from the dispenser
• Visible discoloration or particles in the water
• Decreased effectiveness in filtering out contaminants
• Filter replacement indicator light or message appearing on the refrigerator display
• Filter lifespan reaching its expiration date

For the same part in white, purchase WR02X13424.

The Fresh Food Door Closure Cam is an OEM replacement part for GE refrigerators. It is a component located inside the fresh food door that works together with the door latch mechanism. The door closure cam has a pivoting arm that engages the latch to securely fasten the door shut when closed. For the same part in white, purchase WR02X10637.

Causes of failure include wear and tear over time from repeated usage, damage due to accidental mishandling of the door, or an impact that causes misalignment of the cam. 

Symptoms of a bad door closure cam include:

• The refrigerator door not closing properly
• A sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal leading to temperature inconsistencies

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This wire Wine & Beverage Rack replaces a damaged or missing shelf in wine and beverage refrigerators to securely hold bottles and maximize usable storage space. It restores proper bottle support and prevents shifting during use. What it does:

• Provides stable support for wine and beverage bottles so they store evenly and don't roll or tip.
• Restores proper spacing and organization inside the cooler or wine compartment.
• Helps prevent contact between bottles and interior surfaces that can cause chips or scratches.
• Fits into the cabinet's existing rails or brackets to recreate the original storage layout.

• One replacement wire wine & beverage rack

• Unplug the appliance or switch off power before reaching into the compartment.
• Slide the rack into the existing rails or brackets; no special tools usually required.
• Handle edges carefully; avoid forcing the rack into position to prevent damage.
• If original rails or clips are damaged, inspect and replace those mounting parts separately.

The Fresh Food Door Gasket is an OEM replacement part for GE refrigerators. It forms an air-tight seal around the fresh food door preventing air and moisture exchange between the refrigerator interior and exterior. The gasket helps to maintain the ideal temperature and humidity levels inside for optimal food storage.

Causes of a bad gasket can include cracks, tears, or worn-away sections compromising the air-tight seal over time. Exposure to heat, moisture, or chemicals during cleaning may also degrade sealing qualities.

Symptoms of a bad gasket include:

• Cool air leaking from around the door
• Interior surfaces becoming wet or frosty
• Difficulty maintaining proper interior temperature settings

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dairy Door is an OEM replacement part for GE refrigerators. It serves as a sealed storage compartment ideal for keeping dairy and other perishable items colder longer. 

Color: clear. Measures about 16 inches wide by 8 inches high.

The dairy door houses precision-engineered vents, seals, and insulation optimized for maintaining a dedicated cold zone of around 33°F. tall shelves and wide doors maximize capacity.

Symptoms of a failing door include:

• Temperature in dairy bin fluctuating outside the normal cold range  
• Seals no longer provide an air-tight barrier to prevent warm air entry
• Warping, cracks, or cosmetic wear developing on door surfaces

Causes may be severe temperature changes over time putting stress on materials, or general wear and tear from repetitive opening/closing motions.

This module snugger is a small retaining piece used in the refrigerator to hold its associated module or component securely in place. Replacing a cracked or missing snugger restores a tight fit, reduces vibration and noise, and supports correct operation.

• Secures the related module or assembly to prevent shifting
• Helps maintain proper alignment for reliable performance
• Reduces rattles and wear from vibration or movement
• Typical signs it's needed: part is broken or missing, components feel loose, or you hear rattling

• Disconnect power to the refrigerator before servicing
• Note the original orientation and location; take a photo for reference
• Reuse existing fasteners or clips if applicable; avoid overtightening
• After installation, confirm the part holds the assembly firmly and that movement is smooth where intended

This module shelf secures the appliance's control or module assembly inside the freezer, keeping electronics stable and protected for reliable operation. It replaces a cracked or missing support and restores proper component positioning. What it does:

• Holds and supports the control/module assembly or related electronics inside the freezer compartment
• Prevents module shifting that can cause loose wiring or intermittent connections
• Helps maintain proper airflow around components by keeping parts in their intended position
• Reduces rattle and vibration noise from loose internal modules

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Access may require removing interior shelves, drawers, or a rear access panel—refer to your model's service instructions
• Handle electronic modules and connectors carefully; avoid pulling on wiring

This replacement trim fits the dairy compartment on the refrigerator door. It restores a clean, finished look and proper fit of the butter/dairy bin so contents stay organized and the area opens and closes smoothly.

• Attaches to the front edge of the dairy/butter bin on the fresh food door to provide a finished, secure fit
• Replaces cracked, warped, or missing trim that can cause gaps, rattling, or a loose dairy compartment
• Helps keep small items from sliding out when opening/closing the door
• Built to match the original mounting points for straightforward replacement

• Disconnect power to the refrigerator before servicing
• Open the fresh food door; release tabs or remove any retaining screws to take off the old trim
• Align the new trim with the mounting points and snap in or reinstall existing hardware
• Handle plastic tabs carefully and avoid overtightening screws

The Module Shelf Insert is an OEM part for GE refrigerators. It's designed to enhance the versatility and organization within your fridge by providing an additional layer of storage on existing shelves. This insert allows for the separation of items, making it easier to organize and access your refrigerated goods. 

Causes for a Module Shelf Insert to become problematic can stem from overloading it with heavy items, accidental damage from moving items in and out of the fridge, or the natural wear and tear that comes with regular use. 

Symptoms of a bad Module Shelf Insert include:

• Difficulty fitting or staying in place on the refrigerator shelf.
• Cracks or damage that compromise its ability to hold items securely.
• Warping that prevents it from sitting flat or properly dividing the shelf space.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This replacement screw fastens refrigerator components securely, restoring a tight, rattle-free fit when original hardware is missing, stripped, or corroded. Use it to secure panels, brackets, or trim and keep parts properly aligned.

• Secures panels, brackets, covers, or trim in place
• Helps maintain correct alignment of components and hardware
• Reduces vibration and rattling caused by loose or missing screws
• Replaces lost, rusted, or stripped screws

• Unplug the refrigerator and turn off water supply if working near water components
• Match thread and length to the removed fastener; hand-start threads to avoid cross-threading
• Tighten snugly; do not overtighten into plastic or thin sheet metal
• Keep track of any spacers or washers reused from the original assembly

This door thimble is the bushing that lines the upper hinge on your refrigerator door, supporting the hinge pin so the door swings smoothly, stays aligned, and helps reduce squeaks and wear.

• Provides a smooth bearing surface for the upper hinge pin
• Helps keep the door level and properly aligned with the cabinet
• Reduces friction and noise when opening and closing
• Replace if cracked, worn, or missing, which can cause door sagging, scraping, or poor closing

• Disconnect power and remove items from the door before servicing
• Support the door; remove the upper hinge cover and screws
• Lift the door off the hinge pin and remove the worn bushing from the hinge bracket
• Press the new thimble fully into place, reinstall the door, and verify proper alignment and seal

This door lower hinge bushing installs in the bottom of the refrigerator door and rides on the hinge pin to create a smooth pivot point. Replacing a worn bushing restores proper door alignment, quieter movement, and reliable sealing.

• Provides a bearing surface between the lower hinge pin and the door
• Helps maintain door height and alignment for consistent gasket contact
• Common symptoms: door sagging or rubbing, squeaks, hard opening/closing, or door not closing flush
• Reduces hinge friction and wear at the bottom pivot

• Disconnect power; if applicable, turn off water to the door
• Remove door contents, support the door, and remove lower hinge hardware; lift door straight up
• Pull the old thimble from the door bottom and press the new bushing fully into place
• Reinstall the door, tighten hardware, and verify alignment and gasket seal