Parts for Ge ZISB36DCA: 06 - Fresh Food Section Parts

This part has been discontinued by the manufacturer and is no longer available.

The Light Switch is an OEM replacement part for GE refrigerators. It controls the interior light, turning it on when the refrigerator door is opened and off when the door is closed. This ensures proper illumination for visibility when accessing the refrigerator's contents.

A malfunctioning light switch can result from wear and tear, electrical issues, or damage caused by repeated use. Over time, the internal mechanism may fail, or the housing can crack, leading to improper operation.

Symptoms of a bad light switch include:

• Interior light not turning on when the door is opened
• Light staying on even when the door is closed
• Flickering or inconsistent light operation
• Difficulty pressing or releasing the switch

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This screw fastens appliance panels and components to keep assemblies secure and reduce movement or vibration. A simple replacement part that restores proper fit and helps stop rattling or loose parts. What it does

• Secures panels, brackets, or components to the appliance frame
• Restores proper alignment and reduces vibration or rattling caused by missing or stripped screws
• Provides a direct, OEM-compatible replacement for worn or lost fasteners
• Used anywhere a matching screw is specified on the original equipment

• One screw

• Disconnect power or unplug the appliance before starting any repair
• Use the correct driver bit to avoid stripping the head
• Thread carefully and tighten until snug; avoid over-tightening which can strip threads or crack panels
• Keep removed screws so you can match length and thread if replacing multiple hardware pieces

This pack contains twelve replacement screws used to fasten appliance panels, trim, and components. They restore secure mounting and help stop rattling, loose panels, and gaps for a safer, quieter appliance. What it does:

• Secures exterior and interior panels, brackets, and trim pieces
• Restores proper fit where missing or stripped screws cause movement or noise
• Helps maintain appliance alignment and prevents parts from vibrating loose
• Used for general-purpose repairs on compatible GE appliances

• Disconnect power or unplug the appliance before performing any internal repairs
• Use the correct screwdriver bit and avoid overtightening to prevent stripping threads
• Keep remaining screws in a labeled container for future service
• If a screw does not seat easily, stop and verify correct fit to avoid damage

This water line cover protects and conceals the refrigerator's water supply tubing behind the lower kickplate for a finished look and reduced risk of accidental snagging. Durable plastic shields tubing from contact and helps keep the area tidy. What it does:

• Covers and protects the refrigerator water supply line from accidental pulls or abrasion
• Keeps the tubing out of sight for a neater appearance
• Helps reduce noise from loose tubing contact with other components
• Supports proper routing of the water line to the ice maker/water dispenser

• One water line cover

• Disconnect power and shut off the water supply before servicing
• Remove the kickplate or access panel per the owner's manual to reach mounting points
• Align cover with the routing area and secure with existing clips or fasteners; do not force or modify

MXRC SmartWater Filter reduces lead, cysts, taste and odor, chlorine, sediment, and turbidity in your water and ice. It should be replaced every 6 months or 300 gallons for optimal performance. This filter fits in older Hotpoint and GE Monogram refrigerator models starting with: ZIS36, ZIS42, ZIS48, ZISB36, ZISB42, ZISB48, ZISS36, ZISS42, ZISS48, ZISW36, ZISW42, ZISW48. It can be replaced by using the MWFP filter and the ADAPTER. Dimensions: 6" x 4".

Replacement screw that secures panels and internal components, helping stop rattles and keep parts aligned. Use it to replace stripped, rusted, or missing fasteners and restore a secure fit. What it does:

• Secures panels, trim, or internal parts to prevent movement and vibration.
• Replaces worn, corroded, or missing screws that cause loose panels or rattling.
• Restores proper alignment for doors, covers, and mounted components.
• Provides a simple hardware fix that helps maintain safe, stable operation.

• Always disconnect power to the appliance before accessing internal components.
• Use the correct screwdriver or bit to avoid stripping the head; apply firm but controlled torque.
• Verify screw length, head style, and thread type match the original before installation.
• If threads are damaged, replace with a matching OEM screw rather than over-tightening.

This rear wheel assembly replaces a worn or broken refrigerator drawer roller to restore smooth, stable movement and proper drawer alignment. It helps prevent sticking, scraping, and uneven wear on the drawer track. What it does:

• Replaces a damaged rear roller so the drawer opens and closes smoothly
• Keeps the drawer aligned and prevents it from binding or tilting
• Reduces scraping and uneven wear on the drawer and track
• Supports normal load on the rear of the drawer for stable operation

• Remove drawer contents and slide the drawer out according to your appliance manual before starting
• Inspect the front and rear tracks; replace only the damaged roller(s) and test drawer movement after installation
• Use basic hand tools; avoid forcing parts
• No special wiring or electronic handling required; follow general safety precautions

Freezer side control knob.

Fresh food side control knob.

Power saver switch housing cover.

This lower freezer light housing secures the light assembly and lens in the freezer compartment, providing a stable mount and directing illumination where you need it. It restores a finished interior and keeps the bulb properly positioned. What it does

• Holds the lower freezer light bulb and lens in place to maintain interior illumination
• Protects the bulb from contact with stored items and prevents rattling or misalignment
• Helps ensure consistent light coverage so the freezer interior is easier to see
• Can resolve symptoms like a loose or broken light housing, rattling inside the freezer, or a misaligned bulb/lens

• One lower freezer light housing (36")

• Disconnect power to the appliance before servicing to avoid electrical shock
• Use proper screws and do not overtighten to avoid cracking the housing

The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments. 

All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster. 

Symptoms of a burnt out refrigerator light bulb include:

• Dim or no light illuminating inside refrigerator shelves  
• Shadows and dark spots making it difficult to find items
• Higher utility costs from leaving the door open to see inside

This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models. 

Fresh food side control knob shaft.

Freezer side control knob shaft.

This actuator arm connects to the fresh-food air damper to move the damper door and help direct cold air into the refrigerator compartment. Replaces a worn or broken arm to restore damper movement and airflow control. What it does:

• Moves the fresh-food air damper door when the damper motor or actuator rotates
• Helps regulate airflow into the refrigerator compartment for proper cooling distribution
• Commonly replaces cracked, broken, or detached arms that cause stuck or misaligned dampers
• Works with the existing damper assembly and actuator motor to transfer motion

• One actuator arm for the fresh-food damper

• High-level replacement: access the damper assembly inside the refrigerator, remove fasteners/clips, swap the arm, and reassemble
• Verify power is disconnected before starting work to avoid electrical shock or motor activation
• Handle plastic parts gently to avoid cracking; confirm alignment of the arm on the actuator shaft before securing
• If damper motor or gears are damaged, replace those components as needed—this arm only restores the mechanical link

Fresh food side bottom door hinge.

Fresh food side top door hinge.

This base shaft is the support shaft that helps the washer's tub or drum stay aligned and rotate smoothly. Replacing a worn shaft restores proper drum support and reduces noise, wobble, and uneven operation. What it does:

• Provides a stable pivot and support for the tub/drum during operation
• Transfers rotational force from the drive components to the drum assembly
• Prevents excessive wobble, vibration, and metal-on-metal contact when intact
• Worn or damaged shafts can cause noise, drum misalignment, or premature bearing wear

• Disconnect power and water supply before servicing; follow all safety precautions
• Replacement typically requires removing the cabinet and drum assembly for access
• Inspect adjacent bearings, seals, and mounting hardware and replace if worn
• Use appropriate tools and follow the OEM service manual

This shear pin secures the washer agitator to the drive shaft and protects the transmission by designed failure when the agitator binds. It's a small, low-cost part that prevents costly gear or motor damage. What it does:

• Locks the agitator to the drive shaft so the washer can agitate and spin
• Designed to break (shear) if the agitator is jammed, preventing transmission or motor damage
• Commonly replaced when the agitator spins freely or the washer won't agitate
• Small part that restores proper mechanical coupling between agitator and drive

• One shear pin

• Disconnect power and water before starting any repair
• Access usually requires removing the agitator; follow your model's service instructions
• Verify shaft and agitator mating surfaces for wear or damage and replace if needed

This part has been discontinued by the manufacturer and is no longer available.

Fresh food side hinge cover.

This fresh food damper control regulates the amount of cold air that enters the refrigerator compartment from the freezer. Replacing a worn or stuck damper helps restore consistent temperatures and reduce warm spots or unintended freezing.

• Regulates airflow from the freezer into the fresh food section based on the temperature setting
• Helps maintain stable refrigerator temperatures across shelves and bins
• Common signs of failure: refrigerator warm while freezer is cold; food freezing in fresh food; no change when adjusting the control; stuck or broken damper door
• Correct low or no airflow from the diffuser/air tower in the refrigerator compartment

• Disconnect power before servicing; use proper safety gear
• Access the damper behind the fresh food air diffuser or control cover; retain screws and trim
• Transfer any original brackets, linkage, or seals to the new damper; the door moves freely and seals align
• Restore power and airflow changes when the control is adjusted

Fresh food side case trim.

This is the right side shelf slide. For left side use WR72X258.

This is the left side shelf slide. For right side use WR72X259.