Frigidaire Range / Cooktop / Oven Knob, Dial & Button

Color: White.

The Surface Element Knob is an OEM part for Frigidaire electric ranges. It is the rotary dial located on the stovetop control panel that users turn to select cooking zones and temperature settings. The ergonomic knob features raised markings and a secure fit to reliably select between Off, Low, Medium, and High heat levels. 

Symptoms of a bad surface element knob include:

• Loose, wobbly, or difficult-to-turn knob movement  
• Worn, missing, or illegible heat level markings
• Failure to engage the correct surface element or temperature
• The knob constantly turns on its own

Causes can be normal wear and tear over time high heat exposure warping plastic parts. Petrochemical spills may also degrade knob operation.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The Electric Range Knob is an OEM replacement part for Frigidaire electric ranges and ovens. It is a crucial component that allows users to control and set the desired temperature or function of the range's burners or oven.

Causes of a bad electric range knob can include wear and tear from frequent use, accidental impact or dropping, or exposure to high temperatures that can cause warping or cracking of the knob material.

Symptoms of a faulty Electric Range Knob include:

• Difficulty in turning or adjusting the knob
• Knob feeling loose or wobbly on the control shaft
• Knob markings or indicators becoming worn or illegible
• Knob breaking or cracking, posing a potential safety hazard

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore electric range models.

This control knob replaces a damaged or missing knob on your cooking appliance, restoring smooth, accurate adjustment of settings. Refresh worn controls for better usability and a clean, finished look. What it does:

• Attaches to the control shaft to select heat or function settings
• Helps resolve issues like a cracked knob, stripped insert, or a knob that falls off
• Restores smooth turning and proper alignment when adjusting settings
• Replaces a knob that won't turn or is difficult to grip

• One control knob

• Disconnect power at the breaker; ensure all controls are in the OFF position and surfaces are cool
• Pull the old knob straight off the control shaft
• Align the flat/D-shaped shaft orientation and press the new knob on firmly until seated
• Do not force; verify pointer alignment and smooth operation after installation

This replacement control knob restores a secure, accurate feel to your appliance's controls. When a knob cracks, strips, or goes missing, this part lets you adjust settings smoothly and confidently again.

• Attaches to the control stem to turn the switch or valve
• Enables selecting and adjusting heat or function settings
• Common fix for knobs that are cracked, stripped, wobbly/loose, or missing
• Helps ensure the control engages and indexes properly

• Disconnect power; shut off gas if applicable before servicing
• Pull the old knob straight off—avoid prying sideways to prevent stem damage
• Align the new knob with the control stem (match the flat/D shape) and press firmly
• Test that the control turns and clicks/indexes correctly

This surface burner knob mounts to the cooktop control shaft so you can turn the burner on and choose the heat level. Replace a broken or stripped knob to restore safe, accurate control and a clean, finished look.

• Attaches to the burner valve or surface element switch shaft
• Provides on/off and heat-level selection
• Replaces knobs that are cracked, missing, loose, or stripped
• Helps keep settings aligned for consistent results

• Allow the cooktop to cool; switch off power at the breaker or shut off gas
• Pull the old knob straight off the control shaft—do not pry on the panel
• Align the new knob with the shaft shape and push straight on until fully seated
• If the shaft is worn or damaged, the valve or switch may require service

This replacement control knob lets you turn the range's control shaft to set burner or oven temperature. Swapping a cracked or loose knob restores a secure grip and accurate, easy selection of settings.

• Attaches to the control stem to adjust heat levels or oven temperature
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps when the knob falls off or spins without engaging the control
• Restores proper feel and alignment of settings on the control panel

• Ensure the appliance is off and cool before servicing
• Pull the old knob straight off the stem; do not twist or pry with tools
• Align the new knob with the stem orientation and press firmly until fully seated
• If the knob won't seat, inspect the control stem for wear or damage before forcing

Color: Black

The Knob is an OEM part for Frigidaire ranges. The knob attaches directly to the surface element switch and allows for easy adjustment of settings with a simple turn.

Causes of a bad range knob can be normal wear and tear over time, exposing the knob to excessive heat, or accidental damage from impact.

Symptoms of a bad range knob include:

• Loose, wobbly or difficult to turn fitment
• Cracked, broken or missing pieces
• Control functions that do not work as intended
• Inaccurate temperature readings
• Knob that falls off or does not stay securely attached

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Replace a worn or missing control knob and restore precise, dependable setting selection on your appliance. This knob press-fits onto the control shaft to provide a secure grip and smooth, consistent operation.

• Attaches to the control shaft on the front panel
• Lets you turn the control to select heat, temperature, or function settings
• Common symptoms: cracked hub or stripped insert; knob wobbles, slips, falls off, or won't turn the control

• Disconnect power before servicing; shut off gas supply
• Pull the old knob straight off; align the flat/D-shape on the new knob with the shaft and press fully into place
• Do not use excessive force or tools; avoid bending the control/valve stem

This replacement control knob restores smooth, precise adjustment of your appliance's control when the original is cracked, stripped, or missing. A fresh knob improves grip and pointer visibility so settings are easy and accurate to select.

• Attaches to the control shaft to adjust the setting
• Common symptoms: cracked or broken knob, slips or won't turn the control, falls off, faded indicator/graphics
• Restores proper alignment and feel for reliable operation
• Direct, push-on style replacement on applicable models

• Disconnect power; if servicing a gas appliance, also shut off the gas supply
• Pull the old knob straight off the shaft
• Align the new knob with the shaft and press it on fully until seated
• Verify smooth operation and correct pointer alignment before use

Color: white. Measures about 2 inches in diameter.

This replacement control knob restores a secure, easy-to-read interface for adjusting your appliance's settings. It lets you smoothly turn the control shaft to select heat or function when the original knob is cracked, stripped, or missing. What it does:

• Attaches to the control shaft to turn functions on/off and adjust settings
• Provides a firm grip and clear pointer for accurate selection
• Common symptoms include a cracked knob, worn or missing indicator, loose/wobbly fit, slipping, or falling off
• Helps ensure the control returns to and indicates Off correctly when fully seated

• One control knob

• Allow the appliance to cool; for safety, disconnect power or shut off gas if applicable
• Pull the old knob straight off the control shaft—do not twist the shaft
• Align the keyed/flat side of the hub with the shaft and press the new knob on until fully seated
• Verify the pointer aligns with Off and turns smoothly; transfer any reusable insert/adapter from the original knob if your model uses one
• Some models use position-specific knobs; match markings and part number to your original

Color: White

The Control Knob is an OEM part for Frigidaire cooktop. It functions as the interface to select cooktop burner settings or oven temperature/function options. 

Located on the surface of the range control panel, the knob directly controls gas valves via the electronic control board behind the panel. Turning it selects precise flame levels or bake/broil temperatures with a click into place.

Causes of a bad control knob can include worn drips from steam cleaning, loosened mounting clips from normal rotating wear, or cracks from accidental impact. 

Symptoms of a bad control knob include: 

• Burners or oven not responding to setting adjustments
• Knob easily coming loose or off the control shaft 
• Flames not igniting or staying lit at selected levels

Replacing the knob with a genuine Frigidaire part ensures dependable inputs to the control system. This supports accurate, safe range operation. Compatible with Electric and Gas ranges from Electrolux, Gibson, Kelvinator and Kenmore as well.

This replacement control knob restores smooth, positive control of your range settings. It fits over the control shaft so you can turn burners or oven functions on and accurately set heat levels, with a clear position indication.

• Attaches to the control shaft to operate burners or oven functions and adjust settings
• Replaces cracked, stripped, or missing knobs
• Helps when the knob falls off, spins without adjusting, or is hard to turn
• Restores clear pointer alignment and a solid, secure feel

• Pull the old knob straight off the shaft; avoid prying on the control panel
• Align the flat/D-shaped opening with the shaft and press firmly until fully seated
• Disconnect power before accessing or servicing any controls behind the panel

Color: Black