Frigidaire Range / Cooktop / Oven Tube Or Fitting

This tubing is the OEM thermo/safet capillary line used with the temperature sensing/thermal safety assembly. It transfers temperature information to the control so the appliance can maintain proper temperature and protect components. What it does

• Carries temperature feedback from the sensing bulb to the thermostat/thermal safety device
• Allows the control to react to temperature changes and open/close circuits as designed
• A damaged or kinked tube can cause inaccurate temperature sensing or control faults
• Common symptom: temperature not regulated or unit cycling irregularly when sensing line is compromised

• One thermo/safet tubing

• Install only if tubing and fittings match the original; avoid sharp bends or kinks in the line
• Handle the sensing bulb and capillary gently to prevent damage
• Disconnect power before attempting service; follow all safety and grounding procedures

Replace a cracked, corroded, or damaged gas manifold pipe on your range. This tube connects gas supply components and ensures proper gas flow distribution.

Burner tube for cooktop gas burners. Connects gas valve to burner head. Replace if cracked, corroded, or damaged to restore proper gas flow and fit.

Burner tube for gas ranges. Delivers gas from the valve to the burner head. Replace if cracked, corroded, or damaged to restore proper gas flow.

This rigid water fill tube routes water from the supply to the ice maker or dispenser, helping deliver a steady water flow and preventing leaks when properly installed. It restores reliable water delivery for ice production and dispensing. What it does:

• Directs water from the inlet toward the ice maker or dispenser assembly
• Maintains a sealed pathway to prevent drips and leaks
• Helps ensure proper ice maker fill and consistent dispenser flow
• Faulty or cracked tubes can cause leaks, reduced water flow, or no ice production

• One replacement water fill tube

• Disconnect power and shut off the water supply before starting work
• Replace with the exact part to ensure fit and sealing; use new clamps or seals if required
• Inspect nearby fittings and lines for damage and test for leaks after reconnecting water

Gas supply tube for gas ranges. Connects the gas valve to the burner manifold. Replace if tube is bent, cracked, or shows signs of wear or damage.

Gas supply tube for gas ranges. Connects gas line to burner assembly. Replace if tube is cracked, damaged, corroded, or leaking to restore safe operation.