Frigidaire Wall Oven Control Board

This electronic controller is the main control board that manages the appliance's cycles, settings and user commands for reliable operation. Replaces a failed board to restore electronic control and display response. What it does:

• Interprets user inputs and runs programmed cycles and functions.
• Powers and coordinates sensors, timers and actuators.
• Restores normal display, button/knob responsiveness and cycle selection.
• Commonly used when the appliance won't start, displays errors, or behaves unpredictably.

• Disconnect power before starting any repair to avoid shock or damage.
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available.
• Follow OEM service instructions for access and proper connector seating.

This is the electronic clock/timer that controls the oven's timekeeping, display, and cooking functions. A failing control can stop bake or broil from working and make the display or keypad unresponsive.

• Governs oven functions such as bake/broil through internal relays
• Provides the time display, kitchen timer, and programmable settings
• Faulty unit can cause no heat, dead or dim display, unresponsive buttons, or error codes
• Intermittent beeping or failure to start/stop cycles can also indicate a bad control

• Disconnect power at the breaker before servicing—high voltage present
• Take a photo of wire locations; transfer connectors one at a time to the new control
• Handle the board carefully and avoid static discharge; do not touch relay contacts
• After installation, restore power and set the clock before testing oven functions

Electronic clock timer that replaces the oven's front-console clock and timer functions, restoring accurate time display and timed cooking features. Fits common Frigidaire ranges and wall ovens that use a standalone clock/timer assembly. What it does:

• Provides the oven clock display and the user timer/countdown functions.
• Enables timed cook and delay-start operations that rely on the clock/timer.
• Replaces a blank, flickering, or garbled clock display.
• Fixes unresponsive clock/timer buttons or timers that won't count down.

• Disconnect power (unplug or shut off breaker) before servicing the control panel.
• Access typically requires removing the console/control panel and unplugging a wire harness; keep fasteners/trim organized.
• Handle the assembly carefully to avoid static or physical damage to the display and connectors.

This clock timer control assembly operates the oven/refrigerator clock and timer functions so you can set cook times, delay starts, and use timed features reliably. It replaces a faulty timer/control module to restore timed cooking and display functions. What it does:

• Displays and maintains oven/refrigerator time and countdown timer
• Allows setting cook/delay-start and timed bake functions via the control interface
• Restores unresponsive or blank timer/clock displays when the control has failed
• Helps correct issues where timed functions prevent the appliance from starting

• Always disconnect power to the appliance before servicing to avoid shock
• Basic hand tools are typically required; remove control panel trim to access the module
• Handle the control and display lens carefully to avoid scratching or damaging buttons
• Verify wiring harness connectors match before final assembly; do not force connectors

This is a replacement refrigerator water filter cartridge that helps reduce taste and odor from your drinking water and ice for cleaner, better-tasting results. Ideal for refrigerators that use an inline/cartridge-style filter. What it does:

• Filters chlorine taste and odor to improve water and ice flavor
• Helps reduce common particulates and sediments from the water flow
• Restores normal water dispensing performance when the original filter is exhausted
• Commonly replaced when water tastes off, ice smells, or water flow is reduced

• Replace with the refrigerator powered off or water supply shut off when possible
• Follow refrigerator manufacturer instructions for proper seating, alignment, and filter reset
• Flush several gallons of water through the dispenser after installation to clear air and loose carbon fines
• Dispose of the used cartridge according to local regulations

This electronic clock timer replaces the control module that manages oven clock, timer and timed cooking features so your range keeps time and uses delayed or cook-time functions reliably. What it does

• Controls the oven clock and kitchen-timer display so time and countdowns are visible.
• Enables delayed start and cook-time functions used for timed baking/roasting.
• Does not include mechanical knobs or separate keypads unless specified on the product page.

• One clock/timer control module as shown.

• Disconnect power to the appliance before beginning any service to avoid electrical shock.
• Handle the display and glass panel carefully to avoid scratching or cracking.
• Verify connector orientation and seat wiring harness fully; match part number before installation.

This electronic clock timer assembly provides the oven clock, minute-timer and timed-cook control functions so you can set the time, use the kitchen timer and run timed bake/clean cycles. Designed as a direct replacement for worn or nonworking console clocks. What it does:

• Displays clock time and controls minute-timer functions used for short reminders and countdowns
• Enables timed bake and timed clean cycles so the oven will start and stop at set times
• Replaces a blank, flickering, or non-displaying clock module
• Restores timer or delayed-start behavior when the original control fails

• One clock timer assembly

• Disconnect power to the appliance before starting any repair to avoid shock hazard
• Handle the control and display lens carefully to avoid scratching or damaging the face
• Verify connector orientation and secure all wire harnesses; do not force connectors

This electronic clock timer assembly controls oven timing functions and displays time for baking and self-clean cycles. It replaces a worn or non-responsive oven timer to restore timed cook and clock features. What it does:

• Provides digital clock display and user inputs for timed baking and delay-start
• Controls oven timing functions used by bake, broil and self-clean cycles
• Commonly replaces units that show no display, incorrect time, or fail to start timed cycles
• Interfaces with the oven control to signal cycle start/stop and countdown completion

• Disconnect power to the appliance before starting any repair
• Access typically requires removing the control panel; handle glass displays and connectors carefully
• Verify harness connectors and mounting orientation before final assembly

This electronic clock timer assembly controls the oven clock and timed cooking functions so you can set cook times, delays and use the timer/countdown features. It replaces a faulty control module to restore timer and display operation. What it does:

• Shows and keeps the oven clock time; allows setting delayed start and timed cook cycles
• Operates the oven's timer/countdown features and audible alerts
• Responds to front-panel touch pads/buttons for programming and control
• Common symptom: blank or unresponsive display, clock not keeping time, or timer functions not working

• One electronic clock timer/control assembly

• Disconnect power to the appliance before starting any work to avoid shock
• Handle the display and control board carefully; avoid touching circuit traces and use anti-static precautions if available
• Installation typically requires removing the control panel or console

This electronic clock timer controls oven timing functions and displays time, letting you set bake/clean cycles and timed cooking for consistent results. Replaces a worn or non-responsive oven clock to restore timed operations and display. What it does:

• Provides digital time display and timing control for bake, broil, and self-clean cycles
• Enables timed cooking/start or stop functions and delayed start features
• Replaces a clock that is blank, unresponsive, or losing time
• Works with the oven's control assembly to register user inputs and run programmed cycles

• Disconnect power at the breaker before removing the old control to avoid shock
• Handle the display and circuit board carefully; avoid touching electronics or connectors
• Ensure connectors are fully seated and mounting screws are secure before restoring power

This electronic control board manages a refrigerator's temperature and user interface, restoring proper control of cooling cycles, displays, and timed features. Replace a faulty board to regain reliable electronic control and consistent temperature regulation. What it does:

• Regulates compressor and fan cycles to help maintain set temperatures
• Interprets user inputs from the console or touchpad
• Controls display indicators and diagnostic/error signals
• Can stop or restart timed functions when the board fails

• Disconnect power to the appliance before starting any repair
• Handle the board by edges and avoid static discharge; use an ESD strap if available
• Some panel or console removal is required; keep screws and connectors organized

This electronic controller board manages the appliance's cycles and user interface, restoring normal operation when the original control is faulty. Replace a damaged controller to regain reliable control and consistent cycle performance. What it does:

• Receives inputs from the user interface and sensors and sends commands to motors, valves, and heaters
• Regulates cycle timing, mode selection, and display functions
• Common symptoms: unresponsive controls, no display or error codes, cycles won't start or advance

• One electronic control board

• Disconnect power to the appliance before diagnosing or replacing the board
• Handle the board carefully; avoid static discharge and touching contacts
• Verify wire harness connectors and mounting locations match before final installation
• If you see burned components or connector damage, replace associated harnesses.

This main electronic control board regulates core appliance functions and restores reliable operation when the original board fails. It replaces a malfunctioning control module to help return the appliance to normal cycling and user control. What it does

• Manages primary electronic functions such as compressor/fan cycling, defrost control, and user interface signals.
• Processes button/console inputs and sends commands to subsystems for normal operation.
• Common symptoms it can resolve: blank or unresponsive display, no cooling or intermittent cooling, or erratic cycles.
• Does not include mechanical components—addresses electrical/control-related failures only.

• Disconnect power before removing the old board and again before installing the replacement.
• Handle the board carefully and avoid static discharge; ground yourself or use an antistatic wrist strap.
• Note connector positions and mounting locations; transfer any brackets or standoffs from the old board as needed.

This electronic control board manages a range of appliance functions, replacing a failed or damaged main control to restore user controls and cycle sequencing. It provides reliable command and timing for the unit's features. What it does:

• Receives user inputs and runs the appliance's control programs and timed cycles
• Switches relays and signals to heaters, motors, valves, and lights as required
• Can cause symptoms such as unresponsive controls, incorrect cycles, intermittent operation, or error codes when faulty
• Restores normal electronic control and sequencing when installed correctly

• One replacement electronic control board

• Disconnect power before beginning work to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Follow the appliance service manual for proper wiring and mounting

This electronic control board regulates the refrigerator's functions and user interface, restoring normal cycle control and temperature management when the original board fails. Fits select Frigidaire refrigeration models and replaces the factory controller. What it does

• Manages compressor, fan, defrost and other timed cycles to maintain proper cooling.
• Communicates with the user interface and sensors to set and hold temperature settings.
• Can resolve symptoms like unresponsive controls, incorrect temperature, constant running, or erratic cycling.
• Helps stop display errors or fault codes caused by a failed control board.

• Disconnect power before starting work to avoid shock or damage.
• Handle the board by edges and avoid static discharge; wear an anti-static wrist strap if available.
• Reassemble panels and restore power, then test all functions and settings.