Frigidaire Wall Oven Parts

The Surface Burner Cap is an OEM part for Frigidaire ranges. It fits over the surface burner, providing a protective cover while ensuring proper gas flow and flame distribution.

A bad surface burner cap can be caused by wear and tear, damage, or improper cleaning. When the burner cap becomes faulty, it can result in issues such as uneven flames, inefficient heating, or difficulty in maintaining a consistent temperature.

Symptoms of a bad surface burner cap include:

• Uneven or flickering flames
• Difficulty in reaching desired temperatures
• Excessive gas odor during burner operation

Replace your faulty surface burner cap with this genuine OEM Frigidaire part to restore your cooktop. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This is a smoothtop assembly intended for use with ranges by major manufacturers. This component is located on top of the stove and protects the wiring and heating elements on the interior. The smoothtop assembly is made of strong glass. This part can become damaged and may be unsafe for use. If this happens, the smoothtop assembly will need to be replaced.A set of basic tools will be needed to replace this part. Work gloves can also be useful for preventing injuries from broken glass. First, turn off the range. Unplug it from the wall and make sure it is cool to the touch. Open the oven to remove the screws that hold the smoothtop assembly in place. Pick it up and disconnect the heating elements and wires. Next, install the new smoothtop assembly and hook back up the internal components. Plug in the appliance before use.This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold on an individual basis. The smoothtop assembly is made to be used with ranges, ovens, and stoves created by Ikea, Frigidaire, and Crosley.

This black glass smooth top is the flat cooking surface that covers and protects the range's heating elements, restoring a clean, level work area for cookware and improving the cooktop's appearance. What it does:

• Replaces cracked, chipped or shattered glass to restore a safe cooking surface
• Provides a smooth, easy-to-clean flat surface for pots and pans
• Protects internal burners and heating elements from spills and debris
• Helps cookware sit level for even contact with heating elements

• Disconnect power to the appliance before starting; handle glass with care and wear cut-resistant gloves
• Removal often requires lifting out burner components and removing trim; keep fasteners and brackets for reassembly
• Inspect and reuse existing gaskets or mounting hardware unless damaged

NOTE: The factory has removed the catalyst (honeycomb) from this tube adapter. The catalyst is no longer available.

This electronic clock timer controls oven timing functions and displays time, letting you set bake/clean cycles and timed cooking for consistent results. Replaces a worn or non-responsive oven clock to restore timed operations and display. What it does:

• Provides digital time display and timing control for bake, broil, and self-clean cycles
• Enables timed cooking/start or stop functions and delayed start features
• Replaces a clock that is blank, unresponsive, or losing time
• Works with the oven's control assembly to register user inputs and run programmed cycles

• Disconnect power at the breaker before removing the old control to avoid shock
• Handle the display and circuit board carefully; avoid touching electronics or connectors
• Ensure connectors are fully seated and mounting screws are secure before restoring power

This smooth top cooktop glass assembly replaces a cracked or damaged cooktop surface to restore a flat, easy-to-clean cooking area and proper cookware contact. It fits select electric range models and restores appearance and function. What it does:

• Covers and protects the range's heating elements while providing a smooth cooking surface
• Restores even cookware contact for efficient heating when the underlying elements are working
• Helps prevent debris from falling into the range cavity and simplifies cleanup
• Commonly used when the glass is cracked, chipped, or heavily scratched

• Handle with care; glass can be heavy and break if dropped — use gloves and eye protection
• Verify power is disconnected at the breaker before starting any work
• Installation usually requires removing the range top trim and disconnecting wiring to access mounting points; follow OEM instructions
• If underlying heating elements or supports are damaged, replace them as needed for safe operation

A safety thermostat that monitors and limits temperature at the range/stove backguard to help prevent overheating. Replaces a failed safety limiter to restore proper temperature control and safety operation. What it does:

• Acts as a temperature-limiting safety device for the range backguard assembly.
• Opens the circuit when temperatures exceed safe limits to prevent overheating.
• Commonly replaced when the oven or control fails to maintain temperature or shuts off unexpectedly.
• Helps address overheating, intermittent heating, or safety-trip symptoms tied to the backguard area.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Access may require removing the backguard panel and control housing; keep track of fasteners and wire routing.
• Verify electrical connections are secure and intact; replace only with correct part number.

This is a replacement screw used to secure appliance panels and components. It restores proper fastening so panels, trim, or assemblies stay tight and reduce vibration or rattling. What it does

• Fastens panels, brackets, or trim to the appliance chassis
• Helps stop loose or vibrating panels and trim pieces
• Restores proper alignment where a missing or stripped screw causes gaps or movement
• Use when the original screw is missing, damaged, or corroded

• One replacement screw as shown

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep removed screws in a safe place; this screw matches the original before installation

This harness assembly is the appliance wiring connector bundle that carries power and signals between controls and components, restoring proper electrical connections for normal operation. What it does:

• Routes power and control signals between the control board and key components
• Replaces damaged, burned, or loose wiring that can cause intermittent operation
• Helps resolve symptoms like unresponsive controls, failure to start, or component loss of power
• Restores factory wiring layout and connector fit for reliable connections

• Disconnect power before starting; confirm power is off at the breaker
• Compare connectors and wire colors to the old harness before removal
• Route and secure harness to avoid heat or pinch points; use existing clips/mounts

This electronic control board manages a refrigerator's temperature and user interface, restoring proper control of cooling cycles, displays, and timed features. Replace a faulty board to regain reliable electronic control and consistent temperature regulation. What it does:

• Regulates compressor and fan cycles to help maintain set temperatures
• Interprets user inputs from the console or touchpad
• Controls display indicators and diagnostic/error signals
• Can stop or restart timed functions when the board fails

• Disconnect power to the appliance before starting any repair
• Handle the board by edges and avoid static discharge; use an ESD strap if available
• Some panel or console removal is required; keep screws and connectors organized

This adhesive seal tape is a replacement sealing strip used to restore a tight seal on appliance doors and panels, helping reduce air leaks and improve temperature control. It's a simple repair for worn or damaged seal edges. What it does:

• Provides a flexible, adhesive sealing surface to close gaps between door/panel and cabinet
• Helps reduce air or moisture leakage that can cause temperature loss or inefficient operation
• Restores worn or deteriorated sealing surfaces without replacing the entire gasket
• Compatible with applications where a narrow adhesive sealing strip is required

• Clean and dry the mounting surface thoroughly before applying for best adhesion
• Measure and trim the tape to fit; press firmly along the full length to ensure contact
• Allow adhesive to set per ambient conditions before closing the door or returning to service

This single replacement control knob restores safe, precise control of your appliance's settings. It fits standard control stems to replace a cracked, worn, or missing knob so you can turn burners or temperature dials smoothly. What it does:

• Replaces a damaged or missing control knob so you can select heat or function settings reliably.
• Provides a secure grip and clear pointer alignment for accurate setting selection.
• Stops slipping or spinning on the control shaft when the original knob is worn.
• Helps eliminate intermittent contact or incomplete turns caused by broken knobs.

• Disconnect power to the appliance before servicing to avoid injury.
• Pull the old knob straight off the control stem; press the new knob onto the stem until fully seated.
• Align the pointer on the knob with the control indicator for correct settings.
• If the knob does not seat properly or the control shaft is damaged, do not force—inspect the shaft and replace damaged components as needed.

This is a 10-24 x 1/2 inch machine screw used to secure temperature probes, thermistor brackets, shields and drawer/box components. It provides a simple, reliable fastener for small appliance assemblies. What it does:

• Secures probe or thermistor brackets to the appliance chassis or housing
• Holds shielding or small drawer/box parts in place to prevent movement or rattling
• Helps maintain correct sensor positioning so temperature readings stay stable
• Common replacement when a stripped, corroded, or missing screw causes loose parts or vibration

• One 10-24 x 1/2 in. screw

• Use the matching 10-24 threaded hole; avoid over-tightening to prevent stripping or cracking nearby plastic
• If replacing a corroded screw, inspect mating threads and components for damage before reuse
• Turn off and unplug the appliance or disconnect power before accessing internal components