Parts for Ge GTD45EASJ2WS: Front Panel & Door Parts

Black plug button that covers unused control openings on your dryer control panel. Replace when cracked, broken, missing, or worn to restore a finished look.

Captures lint and debris during drying to prevent exhaust buildup and fire hazards. Replace when torn, ripped, or damaged. Confirm fit with your model.

Replaces the main exterior front panel on your dryer. Restores the visible surface when the original is cracked, dented, or discolored. White finish.

Lint trap duct slides provide smooth operation for your dryer's lint screen. Replace if slides are cracked, broken, or filter doesn't glide properly.

The Trap Duct Assembly is an OEM replacement part for GE dryers. This assembly provides the ducting and pathway to direct lint from the dryer drum to the lint trap. It plays a crucial role in efficiently removing lint and preventing blockages. 

Causes of a bad trap duct assembly can include cracks or breaks in the ducting material, crushing or collapsing of the duct, or loose connections that allow lint to bypass the trap. 

Symptoms of a bad trap duct assembly include:

• Increased drying times as lint is not properly exhausted 
• Lint building up inside the dryer instead of collecting in the trap
• Vibrating or rattling noises from loose or damaged ducting
• Reduced airflow leading to inefficient drying performance

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models. Replace yours today for optimal lint removal and dryer operation.

Supports the front of the dryer drum for smooth rotation. Replace if drum wobbles, makes noise, or clothes have black marks. Verify fit with your model.

Illuminates your dryer drum for better visibility when loading and unloading clothes. Replace when burned out or flickering. Verify fit with your model.

Dryer bearing slides enable smooth drum rotation. Replace when hearing squeaking or rumbling sounds during cycles. Confirm fit with your model number.

The Dryer Bearing Slide (2-Pack) is an OEM replacement part for GE dryers. These slides are installed on the front panel of the dryer and support the drum as it rotates. They help reduce friction and wear, ensuring smooth and quiet operation during drying cycles. This pack includes two bearing slides, which are commonly used together in the dryer assembly.

Over time, bearing slides can wear down due to regular use, heat, and friction. When they become worn or damaged, the drum may no longer rotate smoothly, which can affect the dryer's performance and increase noise levels.

Symptoms of bad dryer bearing slides include:

• A loud squeaking or scraping noise during operation
• Difficulty rotating the drum manually
• Clothes taking longer to dry due to improper drum movement
• Visible wear or thinning on the existing slides

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Supports the front of the dryer drum as it rotates, reducing friction and noise. Replace if you hear squeaking or grinding sounds during operation.

This complete microwave oven door assembly restores the oven's sealed cooking chamber and user access, helping stop heat or steam leaks and providing a secure, functional door surface. Use it to replace a cracked, bent, or non-closing door. What it does:

• Replaces the full microwave door so the oven seals and operates safely
• Restores the outer panel, inner trim and viewing area for normal use
• Helps resolve symptoms like a broken or cracked door, poor closure, rattling, or visible damage
• Re-establishes proper door alignment and latch engagement when installed correctly

• Disconnect power and unplug the appliance before beginning any repair
• Handle glass and trim carefully; wear gloves and eye protection if glass is cracked
• Installation may require removal of surrounding trim or control panel—retain all screws and fasteners

Dryer door pops open during cycle or won't stay closed? Replace the door latch. This part secures the door to the cabinet. Easy 5-minute DIY fix.

Replaces broken, cracked, or sagging dryer door hinges. Mounts to the door frame for smooth opening and closing. Sold individually, screws not included.

Fix intermittent power issues or component failure in your dryer with this socket assembly connector. Restores secure electrical connections to appliance wiring.

Fix a dryer that won't start, keeps running with door open, or stops mid-cycle. This door switch replacement is a common DIY repair taking 15-30 minutes.

A replacement shield switch that helps the oven/microwave detect door position so the unit runs only when the door is closed. Restores reliable door sensing and user safety by replacing a worn or damaged switch. What it does

• Acts as the door-position sensing switch to allow operation only when the door is properly closed
• Stops intermittent or failed start issues caused by a worn or faulty door switch
• Helps correct symptoms like oven/microwave not starting, stopping mid-cycle, or inconsistent door detection
• Works as the plug-in electrical switch used in the door/shield assembly

• Disconnect power at the breaker or unplug the appliance before starting any repair
• Access may require removing the door or control/vent panels
• Handle small metal parts and electrical connectors carefully; avoid bending terminals
• Test door operation and proper function after installation

If your dryer won't start or the door won't latch securely, the door strike may be worn or broken. This part ensures proper door closure. Easy DIY fix.

The Door Strike is an OEM part for GE dryers. This component is crucial for ensuring that the dryer door latches properly when closed. It interacts with the door catch mechanism to secure the door during operation, preventing it from opening unexpectedly, which ensures the dryer operates safely and efficiently.

Symptoms of a failing Door Strike include:

• The dryer door not staying closed during a cycle
• Difficulty in closing the dryer door or getting it to latch properly
• The dryer not starting because the door switch is not engaged
• Visible damage or wear on the door strike

Causes of a bad door strike can include wear and tear from regular use, physical damage from slamming the door or mishandling, and misalignment caused by repeated opening and closing.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: If the door catch is also needed, use part number WE1M1011.

This harness high-limit assembly connects the oven/dryer high-limit thermostat to the control system to help protect against overheating. It replaces a damaged or worn high-limit wiring harness to restore proper thermal cutoff signaling. What it does:

• Routes electrical connections between the high-limit thermostat/thermal cutoff and the appliance control
• Allows the high-limit device to open the circuit when temperatures exceed safe limits
• Common symptom: appliance fails to heat or repeatedly trips a thermal cutoff
• Common symptom: visible damaged/frayed wires or loose connector fit at the high-limit

• One high-limit harness assembly as shown

• Disconnect all power (unplug or shut off breaker) before starting service
• Use basic hand tools; ensure connectors are fully seated and insulated

Dryer door won't latch or stay closed? This strike plate mounts at the door opening to catch the latch securely. Easy DIY repair for reliable closing.

Dryer door won't stay closed or pops open during cycle? This mounting plate anchors the door strike for secure latching. Quick DIY fix with video guide.

Secures dryer panels, brackets, and internal assemblies. Replace missing, stripped, or damaged screws to restore proper alignment and prevent vibration.

Accessory rack that installs inside your dryer drum to safely dry shoes and delicate items. Replace if damaged, broken, or missing from your unit.