Parts for Ge GTD45EASJ2WS: Backsplash, Blower & Motor Assembly Parts

The Timer Knob is an OEM part for GE dryers. It is designed to provide the user with manual control over the timing settings of the dryer’s cycles. This knob is mounted directly on the timer shaft and allows for the selection of various drying times and settings, essential for optimizing the drying process according to the type of laundry being handled.

Symptoms of a bad Timer Knob include:

• The knob failing to engage properly with the timer mechanism, resulting in no change in settings when turned.
• Physical damage such as cracks or breakage that impedes its functionality.
• Difficulty in turning the knob, which may feel stuck or loose.

Causes of a bad timer knob can include normal wear and tear from frequent use, accidental impacts from handling, or material degradation due to environmental factors like heat and humidity.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This backsplash assembly is the dryer's rear control console. It supports and protects the user controls and wiring, restoring a secure fit and clean appearance when the original panel is cracked, warped, or broken.

• Forms the rear control console/backguard of the dryer
• Provides mounting points for user controls and helps protect internal wiring
• Keeps knobs and switches aligned and secure
• Helps resolve: cracked or broken console, loose or recessed controls, rattling/vibration, or difficulty securing the control panel

• Disconnect power; turn off gas supply for gas models
• Remove control knobs and any screws/clips securing the existing console
• Transfer existing controls and hardware to the new backsplash as needed
• Reinstall the console and verify proper control operation before use

The Selector Knob is an OEM replacement part for GE washing machines. Located on the control panel, this knob allows you to select desired wash cycles like normal, delicate or heavy duty.

Causes of a faulty selector knob include wear and tear from repeated twisting motions over many years as well as potential impacts if dropped. Water exposure can also degrade the knob material over time.  

Symptoms of a damaged selector knob include:

• Difficulty rotating the knob or getting it to "catch" cycle positions
• Washer not initiating cycles properly based on knob setting
• Loose knob that wobbles excessively or falls off control panel
• Cracking, flaking or discoloration on the exterior knob surface

This genuine GE knob is compatible with select Hotpoint and RCA washers.

The Dryness Control Board is an OEM part for GE dryers. This part monitors and regulates the drying process to detect the moisture level in the dryer drum. It adjusts the drying time and temperature accordingly, allowing your clothes to dry efficiently while preventing over-drying or under-drying.

A bad dryness control board can occur due to electrical malfunctions, damage, or wear and tear over time. If you notice symptoms such as clothes coming out damp, the dryer running for excessive periods, or error codes related to the drying process, it may be time to replace this part.

Symptoms of a bad dryness control board include:

• Clothes coming out damp
• Dryer running for excessive periods
• Error codes related to the drying process

Restore your GE dryer by replacing the faulty dryness control board with this genuine part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This electronic support control board replaces a failed dryer control module to restore proper cycle selection and electronic functions. It mounts behind the console and routes signals between user controls and the dryer's power components. What it does:

• Receives inputs from the user control and sends commands to the timer, heating element/valve, and motor circuits.
• Helps manage cycle selection, start/stop, and timed functions.
• Works as part of the dryer's control system—does not include service diagnostics or additional modules.

• One support pc board (single control board only)

• Unplug the appliance before starting; disconnect power at the breaker for hard-wired units.
• Handle the board by its edges and avoid touching components to reduce ESD damage.
• Transfer any mounting brackets, harnesses, or shields from the old board if not pre-attached.

The Dryer Push-to-Start Switch is an OEM replacement part for GE dryers. This component is responsible for initiating the drying cycle when pressed, serving as the primary control for starting the dryer's operation.

Symptoms of needing to replace the push-to-start switch include:

• The dryer failing to start or begin the cycle when the switch is pressed
• Intermittent or inconsistent starting issues
• Visible damage or deterioration of the switch itself

Causes of a faulty push-to-start switch can include mechanical wear and tear over time, electrical malfunctions, or physical damage due to impact or mishandling.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dryer models.

This factory screw secures dryer panels and internal components, keeping assemblies tight and aligned so the machine operates safely and without vibration or rattling.

• Fastens sheet-metal panels, brackets, or trim to the dryer cabinet/frame
• A loose or missing screw can cause panel vibration, noise, or misalignment
• Helps restore stability after service or when original hardware is lost
• Typical symptoms include rattling, loose panels, or gaps in trim

• Unplug the dryer before servicing
• Keep track of original screw locations and lengths; replace like-for-like
• Start screws by hand to avoid cross-threading, then snug—do not overtighten
• If threads are damaged, inspect mating hole or clip before installing

This rotary switch is the user control that selects heat/settings for the appliance, restoring reliable selection and responsive control of cycles or temperature settings. It replaces a worn or non-responsive selector control. What it does:

• Switches between user-selected settings or heat levels when the control knob is turned
• Restores proper electrical contact for consistent operation and accurate selection
• Common symptom: knob turns but appliance does not change setting or cycle
• Common symptom: intermittent operation or loss of selected function

• One rotary selector switch

• Disconnect power to the appliance before servicing to avoid shock hazard
• Access typically requires removing the console or control panel; keep fasteners organized
• Verify knob alignment and any retaining clip or harness connector seating during reassembly

This rotary switch is a direct-replacement selector used to change appliance settings—restores proper selection and reliable control of cycles, temperatures or speeds. Ideal when the control dial does not respond or shifts inconsistently. What it does:

• Selects operating settings when the control knob is turned
• Routes power/signals to the chosen function or temperature range
• Replaces worn or intermittently working selector contacts
• Helps resolve symptoms like no response when turning the knob, settings that don't change, or inconsistent operation

• Disconnect power before servicing to prevent shock or injury
• Access may require removal of the control panel; retain screws and hardware
• Transfer the existing control knob and any mounting hardware
• Secure connections; test function before full reassembly

This variable buzzer provides audible alerts for cycle end, timers, and error notifications on compatible GE appliances. It restores clear, adjustable-tone beeps that signal user and diagnostic events. What it does

• Produces variable-tone audible signals for timers, end-of-cycle notices, and alerts
• Replaces a failed, intermittent, or silent buzzer to restore audible feedback
• Works with the appliance control board to emit distinct tones for different events
• Helps identify audible error codes when troubleshooting

• One buzzer assembly

• Disconnect power to the appliance before beginning any service
• Access typically requires removing the control panel or console; handle panels and clips gently
• Match the connector and mounting location to the original part before installing

The Timer is an OEM part for GE dryers. It controls the drying cycles by regulating the length of time that power is directed to the heating element and the drum motor. This ensures your clothes are dried for the appropriate amount of time based on the selected cycle.

You should replace this timer if it becomes faulty. Causes of a bad timer can include electrical failures, worn-out internal gears, or damage from power surges.

Symptoms of a bad Timer include:

• The dryer not starting or stopping mid-cycle
• The timer not advancing
• The dryer running continuously or shutting off too soon

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This factory screw fastens appliance panels, brackets, and internal components. Replacing missing or damaged hardware restores a secure fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable operation.

• Secures panels, brackets, and assemblies as designed for your model
• Replaces missing, stripped, or corroded hardware
• Helps resolve loose panels, vibration/rattling, or misalignment
• Maintains proper fit and function of mounted components

• Disconnect power; shut off gas and water before service
• Match to the original screw and location; order the quantity your model requires
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Refer to your model's parts diagram or service information for exact placement

This genuine replacement wire harness routes power and signals between a range of appliance's control and electrical components to restore reliable connections and proper operation. What it does:

• Transfers power and control signals between controls, switches, and motors or sensors
• Replaces damaged or frayed wiring that causes intermittent operation or component failure
• Helps resolve symptoms such as no power to a circuit, intermittent function, or unresponsive controls
• Maintains factory routing and connector fit for a secure, vibration-resistant connection

• Disconnect power (unplug or shut off breaker) before starting any repair
• Handle connectors gently; match connector shapes and pin counts before installing
• Route and secure the harness using existing clips or ties to avoid heat or moving-part contact

This orange jumper harness routes signals and power between wiring harness sections to restore proper electrical continuity. It's a direct-fit replacement that helps clear connection faults and re-establish reliable component communication. What it does:

• Provides a clean, color-coded connection between harness points to maintain circuit continuity
• Replaces damaged or brittle wiring that can cause intermittent operation or loss of function
• Prevents open circuits and improves connector seating for reliable appliance performance
• Used where a short harness run or jumper is required to bridge terminals

• Unplug the appliance or disconnect power before beginning work
• Match wire colors and connector shapes to the original; ensure connectors are fully seated
• Inspect surrounding wiring and connectors for heat or damage and replace if needed

The Blower Wheel is an OEM component specifically designed for GE dryers. It is responsible for circulating air during the drying cycle, directing airflow through lint and clothes to remove moisture. The plastic blades of the blower wheel push air through the dryer and out the vent when the motor is running. 

Symptoms of a bad blower wheel include:

• Slow or inefficient drying times even on low moisture loads    
• Strange noises from inside the dryer cabinet      
• Excessive vibrations felt through the dryer door or cabinet
• Bent or cracked blower wheel blades

Causes can include normal wear and tear over time, accidents that damage the blades, or failures in the secure mounting of the blower wheel.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This replacement motor strap secures the dryer's drive motor to its mounting bracket so the motor and blower stay aligned and stable, helping reduce vibration and noise for smoother operation. What it does:

• Holds the drive motor firmly to the base/bracket
• Maintains proper alignment of the motor and blower wheel to prevent rubbing
• Helps reduce vibration, rattling, and related noise
• Typical signs of failure: increased vibration, rattling, scraping from the blower area, or a motor that feels loose inside the cabinet

• Includes 1 motor strap

• Disconnect power; for gas dryers, also shut off gas supply
• Access the motor assembly; note the strap's routing/orientation before removal
• Support the motor while releasing the strap to avoid stressing wiring and mounts
• After securing the strap, rotate the drum/blower by hand to verify free movement before reassembly

This motor strap secures the appliance motor to the cabinet, keeping the motor stable during operation to reduce vibration and noise. Use this replacement to restore proper motor positioning and support in compatible models. What it does:

• Holds the motor firmly in place to prevent movement or shifting during use
• Helps reduce vibration and associated noise caused by a loose motor
• Maintains correct motor alignment so belts and linkages run smoothly
• Commonly used when a worn or broken strap allows motor sag or misalignment

• One motor mounting/retaining strap

• Disconnect power to the appliance before beginning any work
• Inspect mounting points and fasteners; replace any damaged hardware as needed
• Secure strap to the motor and cabinet using the original mounting holes and recommended hardware

This motor support is the stamped metal bracket that secures the dryer motor and blower assembly, keeping components aligned for smooth operation. It restores proper motor mounting and reduces noise from loose or misaligned parts. What it does:

• Holds the dryer motor and blower housing in the correct position to prevent wobble or misalignment
• Helps maintain proper blower alignment for effective air movement
• Supports safe, reliable motor operation when the original bracket is bent, cracked, or worn

• Disconnect power (unplug electric or shut off gas and breaker) before beginning repair
• Access requires opening the dryer cabinet and removing the drum and/or front panel on many models
• Inspect related components (motor mounts, blower wheel, idler, belt) and replace if damaged

The Belt Drive is an OEM replacement part for GE dryers. It is responsible for transferring power from the motor to the drum. A bad belt drive can be caused by normal wear and tear over time, as well as excessive load or strain on the dryer drum. 

Symptoms of a bad belt drive include:

• The dryer drum not spinning or rotating.
• Unusual noises coming from the dryer during operation.
• The drum not tumbling smoothly or consistently.
• The belt appearing frayed, cracked, or broken.

Causes of a faulty Belt Drive can include normal wear and tear over time, excessive tension or stretching, or physical damage from improper installation or foreign objects.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This idler arm, also called a belt tensioner arm, supports the idler pulley that keeps the dryer's drive belt tight so the drum rotates smoothly. Replacing a worn arm helps eliminate noise and belt tracking issues.

• Maintains proper belt tension by positioning the idler pulley against the drive belt
• Helps prevent belt slippage, squealing, and premature belt wear
• Supports smooth, consistent drum rotation during cycles
• Typical failure symptoms include squeaking/chirping, burning rubber smell, belt coming off, or the drum not turning

• Disconnect power; for gas dryers, also shut off the gas supply
• Access the idler assembly by removing the front or lower access panel
• Release belt tension and note the belt routing; reinstall pulley and spring as removed, then re-tension the belt
• Manually rotate the drum to verify belt tracking before reassembly and testing

The Idler Pulley is an OEM component specifically designed for GE dryers. As part of the drum assembly, the idler pulley helps drive the rotation of the drying drum. It works closely with the belt and motor pulley to spin the drum and tumble clothes during the drying cycle.

Causes of a bad idler pulley can include wear and tear of moving parts over time, loose or worn belts that cause added strain, or damage from sticking or jamming during operation. 

Symptoms of a bad idler pulley include:

• The dryer drum not spinning or tumbling clothes
• Loud grinding or squealing noises coming from inside the dryer 
• The belt slipping off the pulleys
• Vibration or shaking during use

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This exhaust blower gasket seals the joint between the dryer's blower outlet and exhaust duct. It helps maintain proper airflow and contain lint and heat, supporting efficient drying and preventing leaks into the cabinet or laundry area. What it does:

• Seals the blower-to-exhaust connection to prevent air and lint leaks
• Helps maintain designed airflow through the drum and vent system
• Can reduce warm air or lint escaping inside the cabinet

• 1 gasket

• Disconnect power; for gas dryers, shut off gas and disconnect the supply. Allow the dryer to cool.
• Access the blower housing/exhaust duct; remove panels as needed.
• Remove the old gasket and any residue; clean mating surfaces and lint before installing.
• Seat the new gasket evenly and reassemble; avoid overtightening fasteners and ensure the home vent is clear.

This blower housing assembly directs airflow from the dryer motor to the drum and exhaust, restoring proper venting and drying performance. It replaces a damaged or cracked housing to help the dryer move air efficiently. What it does:

• Channels airflow from the motor to the lint filter and exhaust duct
• Supports the blower wheel and maintains correct blower clearance
• Helps prevent air leaks that can cause poor drying or overheating
• Commonly replaced when the housing is cracked, warped, or excessively worn

• One blower housing assembly as shown

• Disconnect power before beginning any repair; ensure the dryer is unplugged or its breaker is off
• Removal may require access panels and disconnection of the blower wheel and motor mounting hardware
• Inspect and clean nearby lint and venting while the dryer is disassembled

This exhaust duct directs hot, moist air from the dryer's blower housing to the external vent. Replacing a cracked or leaking duct restores proper airflow, helps prevent lint leaks, and supports consistent drying performance. What it does:

• Routes exhaust air from the blower housing to the rear outlet and home vent
• Maintains a sealed airflow path for efficient drying and moisture removal
• Helps keep lint contained within the exhaust stream to the vent system
• Common failure symptoms: longer dry times, warm air or lint escaping, or visible cracks/damage to the duct

• 1 exhaust duct

• Unplug the dryer and shut off gas supply for gas models; allow the appliance to cool. Wear cut-resistant gloves.
• Remove the necessary panels to access the duct per your model's service information.
• Transfer and reuse existing screws and any foam seals/gaskets if not supplied; seat the duct fully and tighten fasteners evenly for an airtight fit.
• Vacuum lint from the cabinet and confirm the external vent hose is clear and securely attached before testing.

This Thermostat is an OEM part for GE dryers. As a critical component in regulating the dryer's temperature, this thermostat ensures that the machine operates within a safe and efficient heat range. It monitors and controls the heat level, preventing the dryer from overheating while maintaining optimal drying conditions.

The need to replace the thermostat can arise from a variety of issues, including electrical problems, wear and tear, or a malfunction due to overheating. A failing thermostat can significantly impact the dryer's performance and safety.

Symptoms of a faulty Thermostat include:

• The dryer not heating up properly or overheating.
• Clothes taking longer than usual to dry.
• The dryer shuts off prematurely or not starting.
• Inconsistent heating leads to unevenly dried clothes.
• Potential safety hazards if the dryer overheats.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This is a genuine GE replacement screw used to secure appliance panels and components, restoring proper fit and reducing vibration or rattling. A simple fastener that helps keep assemblies aligned and functioning safely. What it does:

• Secures panels, brackets, and small components in place
• Prevents noise from loose parts and maintains structural alignment
• Restores proper fastening after repairs or wear
• Matches OEM fit for reliable replacement

• Disconnect power to the appliance before accessing internal parts
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully and tighten until snug; do not overtighten to prevent damage
• Replace any damaged or missing fasteners with the same OEM part for best results

This plate motor drives the microwave/oven turntable, keeping the glass tray rotating for even cooking and heating. Replaces a worn or failed motor to restore tray rotation and reduce uneven heating. What it does:

• Turns the glass turntable so food cooks evenly
• Stops rotation or hesitates when motor fails or wears out
• May make buzzing, grinding, or intermittent noises before failing
• Prevents the turntable from rotating if the motor no longer engages

• One replacement plate (turntable) motor

• Disconnect power before servicing to avoid shock; verify unit is fully powered off
• Remove the turntable glass and roller guide to access the motor underneath the oven/microwave floor
• Typical install requires removing interior fasteners and unplugging the motor connector; retain hardware for reassembly

Includes 12 screws.

This replacement screw secures appliance panels and internal components per your model's hardware list. Replace lost or stripped screws to keep assemblies tight, reduce vibration and rattles, and maintain proper alignment.

• Fastens brackets, covers, and sheet-metal panels as specified in the parts diagram
• Restores proper fit when an original screw is missing, stripped, or damaged
• Helps eliminate rattling or vibration from loose hardware
• Keeps components safely in place during operation

• Disconnect power to the appliance before servicing
• Match length, head style, and thread to the original; install in the same location/quantity
• Start threads by hand to avoid cross-threading; tighten with the correct driver
• Do not overtighten, especially into plastic or thin sheet metal

This GE Motor Drive and Pulley is an OEM part for GE dryers. The motor drive powers the drum, and the pulley system ensures proper tension and alignment of the belt. 

The need for replacement can arise from various factors such as prolonged use, electrical issues, or mechanical wear and tear. A failing motor drive and pulley can significantly impact the dryer's performance.

Symptoms of a malfunctioning Motor Drive and Pulley include:

• The dryer drum struggles to turn or doesn't turn at all.
• Unusual noises like humming or grinding during operation.
• The dryer stops unexpectedly during a cycle.
• Overheating of the dryer motor.
• The dryer takes longer than usual to dry clothes.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Start Button is an OEM replacement part for GE dryers. It is the push interface that allows users to initiate wash cycles.

Causes of failure relate to cracks forming from chronic pressing, mineral buildup obstructing contacts, or loosened wires detaching connections over time.

Symptoms involve:

• Inability to activate the drying function regardless of settings
• Display lights functioning but drum failing to rotate
• Door remaining locked requiring manual override

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore model dryers.

The MOTOR & BLOWER ASSEMBLY is an OEM part for GE dryers. It contains both the drive motor that tumbles the dryer drum as well as the blower motor that circulates air through the heating system. This dual-component assembly works together to simultaneously tumble clothes while pushing heated air into the dryer cylinder.

Causes of a bad motor and blower assembly can include failures of either the drive motor or blower motor. Wiring issues or damaged components internal to the assembly housing can also impact performance.  

Symptoms of a bad motor & blower assembly include:

• The dryer drum not spinning or tumbling clothes
• Inadequate or no airflow through the dryer 
• Dryer not heating or cycles taking excessively long
• Loud buzzing or grinding noises from internal motors

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.