Parts for Lg LRMDC2306D/00: Full Convert Drawer Parts

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Replaces cracked, warped, or missing inner freezer tray. Restores flat storage surface in freezer drawer. Direct fit for bottom-mount refrigerators.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

Replace your bottom-mount refrigerator's drawer tray assembly when cracked, broken, or damaged. This structural component holds items in the drawer compartment.

This supporter cover is a replacement internal bracket that helps secure the TV's back or front cover, restoring proper panel alignment and reducing movement. Fits where the cover needs a mounting or support point to sit flush and stable. What it does

• Provides structural support to the TV cover or bezel so panels align correctly.
• Prevents cover flexing or sagging that can cause gaps or rubbing.
• Helps stop rattling or vibration-related noise caused by loose cover panels.
• Restores proper mounting points for screws or clips that hold the cover in place.

• One supporter cover.

• Unplug the TV and place it on a soft, flat surface before beginning.
• Remove the external cover or bezel per the service manual to access the mounting location.
• Keep track of screws/clips; use the same hardware unless replacement is specified.

Reduces food odors in your refrigerator's fresh-food compartment by neutralizing smells at the source. Replace when odor control becomes less effective.

Drawer guide rail for bottom-mount refrigerators. Installs along the drawer sides to help drawers slide smoothly. Replace if cracked, broken, or worn.

Refrigerator drawer cover panel that sits on the front of your crisper or storage drawer. Replace if cracked, broken, discolored, or missing.

Guides your refrigerator drawer for smooth, aligned movement. Replace if drawer sticks, wobbles, or makes noise. Verify fit with your model number.

Replacement crisper drawer assembly for bottom-mount refrigerators. Installs in fresh food section to store vegetables and fruits. Order new if cracked or broken.

Vegetable crisper drawer assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing drawers in the lower fresh food compartment.

This cover assembly replaces the TV's outer housing panel to protect internal components and restore the set's finished appearance. It helps keep circuitry shielded and prevents dust, debris, and accidental contact. What it does:

• Replaces a cracked, dented or missing TV housing panel to restore structural protection and appearance
• Shields PCB and power components from dust and accidental contact
• Stops rattling or vibration caused by a damaged or loose outer cover
• Restores mounting points for trim and back-panel fasteners so the set closes securely

• Disconnect power and place the TV face-down on a soft, protected surface before starting
• Remove exterior screws and any trim pieces to access the old cover; save fasteners unless replacements are provided
• Handle with care to avoid scratching the finish or damaging internal ribbon cables and connectors

Dim or uneven refrigerator lighting? This lamp cover protects and diffuses your interior light. Direct-fit replacement lens, simple installation.

This ferrite magnet is a replacement magnetic element used in compatible appliance assemblies to help secure components and maintain proper alignment. It restores magnetic retention and reduces shifting or misalignment during operation. What it does:

• Provides magnetic retention for panels, assemblies or components that rely on ferrite magnets
• Helps maintain proper alignment and secure closure where magnets are used
• Can reduce noise and vibration related to loose magnetic components
• Useful when a brittle, cracked or weak magnet no longer holds parts in place

• Disconnect power and follow the appliance manufacturer's safety instructions before servicing
• Handle the magnet carefully; ferrite material is brittle and can chip or shatter if dropped or struck
• Keep magnets away from sensitive electronics and credit cards; avoid pinching fingers between strong magnets
• If the original magnet is bonded or embedded, some adhesive or light trim may be needed for proper fit.

Freezer door foam assembly for bottom-mount refrigerators. Replaces damaged, cracked, or worn foam insulation on the freezer door interior panel.

Seals your refrigerator door to maintain temperature and reduce energy loss. Replace when worn, cracked, or causing frost buildup. Confirm fit with model.

Restore a tight door seal and prevent air leaks with this refrigerator door gasket. Replace when you notice frost buildup, condensation, or warm temps inside. Confirm fit with your model number.

Cover cap for bottom-mount refrigerators. Conceals screws or mounting points on interior or exterior surfaces. Replace if cracked, broken, or missing.

Plastic cover cap for refrigerators. Snaps onto shelves, hinges, or trim to conceal screws and mounting hardware. Replace if cracked, broken, or missing.

Decorative door trim handle for refrigerator doors. Replaces scratched, cracked, or worn trim pieces to restore a finished look and easier grip.

Decorative trim cover that fits over your refrigerator door handle. Replace if cracked, discolored, or missing to restore your handle's appearance.

Covers and protects the refrigerator door hinge assembly. Replace this cap if cracked, missing, or worn to restore a finished appearance and keep hinges clean.

Replace a cracked, loose, or missing freezer door handle on your bottom-mount refrigerator. Restores secure grip and factory appearance to the door.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

If your refrigerator door rattles, won't close evenly, or shows condensation, this door foam insulation assembly restores proper fit and seal.

This case assembly for the home bar area replaces the molded housing that supports the bar dispenser components and provides a finished interior opening. Restores secure mounting and proper alignment for the bar access area. What it does

• Replaces the molded housing that surrounds the home bar access, ensuring components sit securely
• Helps stop rattling, misalignment, and gaps around the bar opening
• Restores proper fit and finish for the bar area to prevent air leaks and moisture intrusion
• Supports attached parts such as liners, trim, or dispensing components

• High-level replacement — remove power and empty the area before servicing
• Handle panels and trim carefully to avoid cracking plastic; use appropriate trim tools
• Use existing fasteners unless new hardware is explicitly included

Cushions and limits refrigerator door movement to prevent slamming. Replace this stopper if cracked, worn, or missing to protect cabinet and hinges.

Replaces worn, cracked, or non-responsive control panel buttons on your refrigerator. Restores tactile feedback and proper panel appearance.

Seals the refrigerator door to keep cold air in and warm air out. Replace if worn, torn, or moldy to restore proper temperatures and efficiency.

Replace your worn home bar door gasket to restore an airtight seal and maintain proper cooling. Prevents cold air loss and condensation. Confirm fit with your model.

Restores your refrigerator's exterior appearance and protects internal components. Replace when cracked, dented, or missing to maintain proper seal. Confirm fit with your model number.

Replacement inner door bin for bottom-mount refrigerators. Restores storage space for bottles, jars, and condiments when original is cracked, broken, or missing.

Replacement door basket for bottom-mount refrigerators. Snaps into inner door rails to hold condiments, bottles, and jars. Replaces cracked or missing bins.

Refrigerator door basket assembly mounts inside the door to hold bottles, jars, and condiments. Replace if cracked, broken, or missing to restore storage.

Replacement door basket assembly for refrigerator doors. Restores storage for bottles, jars, and condiments. Replaces cracked, broken, or missing bins.

Door stopper assembly for bottom-mount refrigerators. Prevents door from swinging too far or slamming. Replace if cracked, broken, or missing.

Replacement door stopper for refrigerators. Cushions door closure to prevent slamming and reduce noise. Install if your original is cracked, broken, or missing.

Hinge-mounted stopper that controls your refrigerator door's opening angle. Replace if cracked, broken, or missing to restore smooth movement.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replace a worn, broken, or missing refrigerator door handle. This assembly mounts to the fridge door to restore a secure grip and finished appearance.

This connector rail is a small replacement connector used to join or secure the wiring/harness along the appliance rail, helping maintain proper electrical routing and stable connections for reliable operation. What it does:

• Provides a secure connection point along a mounting rail to keep wiring harnesses routed and supported
• Helps prevent wires from snagging, rubbing, or becoming disconnected during use or door movement
• Reduces strain on terminals and harness ends by keeping wiring aligned and restrained
• Commonly replaced when cracked, broken, or when the connector no longer holds the harness securely

• One connector rail

• Disconnect power to the appliance before inspecting or replacing wiring components
• Replace only the listed connector;
• Use basic hand tools and avoid stretching or pinching the harness when installing
• If you find damaged wiring or terminals, repair or replace those parts before restoring power

Slide rail that guides and supports refrigerator drawers for smooth opening and closing. Replace if worn, bent, cracked, or causing noisy operation.

Restores smooth drawer operation in your refrigerator. Replace when drawers stick, sag, or don't glide properly. Verify fit with your model number.

Decorative cover cap for bottom-mount refrigerators. Replaces cracked, broken, or missing caps on door handles, hinges, or trim areas.

Replacement door bar for bottom-mount refrigerators. Installs on the interior door to hold items in place. Order a new one if cracked or broken.

Ice maker won't eject ice cubes? This drive gear transfers motor power to rotate the ejector arm and harvest ice. Simple repair restores ice production.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

Replace a cracked or broken cover support bracket in your bottom-mount refrigerator. Secures the internal cover panel in place. Direct fit part.

Replace your refrigerator's center hinge assembly to restore proper door alignment and ensure smooth operation. Fits select bottom-mount models. Verify compatibility.

Center hinge assembly connects refrigerator doors for smooth operation. Replace if cracked, broken, or causing door misalignment on your bottom-mount unit.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

Handle bar for bottom-mount refrigerator doors. Replaces cracked, broken, or missing handle bars. Installs on door exterior for secure grip.

Upper door hinge assembly for refrigerators. Mounts at the top of the cabinet to support the door. Replace if cracked, broken, or worn for proper alignment.

Secures and aligns your refrigerator door for smooth opening and proper sealing. Replace if door sags or closes unevenly. Verify fit with your model number.

Secures and aligns the top refrigerator door for smooth opening and proper sealing. Replace when door sags or won't close properly. Verify fit with your model.

Replaces damaged duct vent cap assembly on your refrigerator. Install when cap is cracked, broken, or missing to restore proper airflow. Verify fit with your model number before ordering.

Lever spring for bottom-mount refrigerators. Provides tension for internal lever mechanisms. Replace if broken, stretched, or missing to restore proper fit.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

If your refrigerator lever won't return to position or feels loose, this lever return spring restores proper tension for smooth operation. Direct-fit part.

Water funnel assembly for bottom-mount refrigerators. Directs water flow in the ice and water dispenser system. Replace if cracked or damaged.

Replacement door hinge spring for refrigerators. Provides tension for smooth door opening and secure closure. Replace if door sags or won't stay closed.

Fix a non-responsive or broken dispenser button with this push-style lever. Restores tactile feedback and control input. Simple snap-in replacement.

Internal bracket assembly that mounts and secures the door handle to your refrigerator door. Replace if the bracket is cracked, broken, or stripped threads.

Fix your refrigerator not cooling properly with this evaporator coil assembly. Restores proper refrigeration when frost buildup or warm temps occur.

Fix inconsistent cooling or temperature issues in your refrigerator. This thermistor assembly monitors temps so your control board cycles properly.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

If your refrigerator has uneven cooling or fan noise, the fan guide may be damaged. This part channels airflow properly and prevents blade rubbing.

Replacement drip tray for bottom-mount refrigerators. Installs beneath the unit to catch condensation. Replace if cracked, missing, or worn out.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Replacement drain tray assembly for bottom-mount refrigerators. Collects defrost water beneath the unit. Replace if cracked, warped, or missing.

Protective front cover panel for refrigerators. Installs on the exterior to conceal components. Replace if cracked, broken, or missing.

Front cover assembly for bottom-mount refrigerators. Installs on the exterior or control area. Replace if cracked, broken, or cosmetically damaged.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

Fix refrigerator not cooling, temperature fluctuations, or display errors with this main control board. Moderately challenging repair for bottom-mount models.

If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

Rail connector for refrigerator drawers. Secures and aligns drawer rails to the cabinet frame. Replace if cracked, broken, or missing for proper support.

Connector piece that joins drawer rail sections in your refrigerator. Replace if cracked, broken, or missing to properly support and align drawers.

The Magnet Switch is an OEM part for LG refrigerators. It plays an important role in monitoring the position of the refrigerator door. 

The magnet switch works together with a magnet installed in the door gasket to detect when the door is opened or closed. It communicates this information to the control board which uses it to manage temperatures and fan speeds accordingly. 

Causes of a bad magnet switch can include wear and tear over time, physical damage, or failure of internal components. 

Symptoms of a bad magnet switch include:

• Improper cooling and freezing performances 
• Inability to detect when the door is opened
• Erratic temperature fluctuations
• Errors codes relating to door sensors

This genuine OEM LG magnet switch restores the door monitoring functions of your refrigerator. It is also compatible with Sears/Kenmore refrigerator models.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

Fix frost buildup in your refrigerator with this defrost heater sheath. Restores proper defrost cycles and prevents ice accumulation. DIY repair.

Illuminates refrigerator interior when door opens. Replace when light dims, flickers, or fails to restore bright visibility. Verify fit by model number.

Replace a damaged or non-functioning refrigerator power cord assembly. Restores electrical connection when your fridge won't turn on or power on.

Refrigerator not cooling or lights flashing? This main control board manages power and operations. Intermediate repair, typically 30-45 minutes.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

The Ice Maker Assembly kit is an OEM replacement part for LG refrigerators. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid. It then automatically ejects the ice and refills to continue the process until the ice storage bin is full.

Causes of failure can be mineral buildup affecting moving parts, wear from the motor over many harvest cycles, or damage to internal wiring from door mishandling.

Symptoms of a problematic ice maker include:

• Incomplete or below-normal ice production
• Ice cubes appearing oddly shaped or cloudy
• Strange noise or vibrations heard from inside the freezer
• Dispenser not functioning or unresponsive

This part is also compatible with some models from Sears/Kenmore.

Ice maker not producing ice or making small, malformed cubes? This ice maker assembly fixes inconsistent ice production. Moderately difficult repair.

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.

Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.

Fan grille assembly cover for bottom-mount refrigerators. Protects fan and directs airflow. Replace if cracked, broken, or clips are damaged.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

Ice bucket assembly collects and dispenses ice from your refrigerator. Replace if cracked, broken, or ice won't dispense properly. Verify fit with model number.

Rubber cap for bottom-mount refrigerators. Covers and protects screws, bolts, or openings. Replace if cracked, missing, or worn to restore appearance.

Fix a dispenser that won't activate or feels stuck with this refrigerator dispenser lever. Direct replacement part for bottom-mount models. Easy repair.

This is a complete ice maker assembly that includes the ice maker module and auger motor used to produce and dispense ice. It mounts inside the freezer compartment and automates the ice-making cycle from filling to ejecting ice into the storage bin. Replace this assembly if your refrigerator stops making ice, produces undersized or misshapen cubes, or if the dispenser auger motor no longer turns to push ice through the chute.

The Water Tank is an OEM part for LG refrigerators. It is responsible for storing and supplying water to the refrigerator's internal dispenser and ice maker. Made from food-grade plastic, the water tank is designed to hold water in a safe, sealed container.

Causes of a bad water tank can include cracks that develop over time, possibly from repeated fillings and drainings of the tank which lead to stress fractures. Mineral or sediment buildup may also cause issues.

Symptoms of a faulty water tank include:

• Leaks or water spillage inside the refrigerator 
• Inconsistent or disrupted water supply to the dispenser/icemaker
• Irritating noises from water sloshing around a damaged tank

This OEM LG part is also compatible with Sears/Kenmore refrigerator models. Proper installation of this replacement part will restore full water functionality.

Plastic water supply tube for bottom-mount refrigerators. Connects water line to dispenser or ice maker. Replace if cracked, leaking, or broken.

Pipe holder bracket for bottom-mount refrigerators. Secures refrigerant or water lines in place. Replace if cracked, broken, or missing to prevent lines from sagging or vibrating.

This is a polyethylene (PE) plastic tube with a 1/4" outer diameter used to carry water within the refrigerator, typically connecting the water inlet valve to the ice maker or water dispenser. It provides a flexible, food-safe pathway for water flow. Replace this tubing if you notice leaks, cracks, kinks, or reduced water flow to the ice maker or dispenser.

Connects water tubing inside your refrigerator to supply the ice maker and water dispenser. Replace if cracked, leaking, or unable to hold tubing securely.

Fix a refrigerator that's not dispensing water or making ice with this water inlet valve assembly. Controls water flow to dispenser and ice maker.

The Filter assembly,water is an OEM component specifically designed for LG refrigerator water filters. This assembly contains activated carbon blocks that remove impurities from the water supply as it flows through. 

Causes for replacement include normal filter exhaustion from heavy water use, or accidental damage. LG recommends changing the filter every 6 months for optimum performance.

Causes of a bad water filter assembly include:  

• Impurities detected in taste tests of dispensed water
• Slimy or unappealing buildup in water lines or dispenser area  
• Error codes or functionality issues with the dispenser

This OEM LG part is also compatible with select Sears/Kenmore refrigerators.

Fix ice maker overflows, water leaks, or no water to dispenser. This inlet valve controls water flow from your supply line. DIY-friendly repair.

Fix no ice, slow water flow, or leaking issues with this refrigerator water inlet valve. Controls water supply to ice maker and dispenser.

Fix no water or ice issues with this refrigerator water valve assembly. Controls water flow to icemaker and dispenser. Moderate DIY repair in 30-45 minutes.

Plastic trim cap that snaps over exposed fasteners and mounting posts on your refrigerator. Replace if cracked, broken, missing, or discolored.

Fix water dispenser leaks or no ice with this inline water connector tube. Joins refrigerator water lines to restore secure flow. Simple repair.

Water line tube connector for bottom-mount refrigerators. Replaces cracked, leaking, or broken connectors that secure water supply tubing connections.

Fix water leaking from your refrigerator's filter area with a new filter head assembly. Solves filter connection issues and slow water flow. DIY repair.

Removes impurities and contaminants for clean, fresh-tasting water and ice. Replace every 6 months or when water flow decreases. Verify fit with your model.

This pipe holder is a small plastic clip that secures tubing and small pipes inside the appliance, helping keep lines organized and preventing rubbing or disconnection. It restores proper routing and reduces vibration-related noises. What it does:

• Holds and secures water, drain, or refrigerant tubing to prevent sagging and chafing
• Keeps lines routed away from moving parts to reduce wear and noise
• Helps maintain proper tube alignment to avoid strain on fittings
• Commonly replaced when the original clip is cracked, broken, or missing

• Disconnect power and water before working on the appliance
• Inspect surrounding tubing and fittings for damage when replacing the clip
• Typically installs as a push-fit or snap-on clip; use gentle pressure and avoid forcing
• Replace broken or brittle clips to prevent tubing damage or leaks

Replacement door hinge assembly for your refrigerator. Installs on the cabinet to support the door. Replace if cracked, bent, or worn for proper alignment.

Molded door shelf cover for the home bar compartment. Replaces cracked, broken, or missing covers. Installs on the refrigerator door for a finished look.

Secures and supports refrigerator door pivot for proper alignment and smooth operation. Replace when door sags, seals poorly, or binds. Confirm fit with model.

The Lever Cover is an OEM part for LG refrigerators. This cover fits neatly over the freezer door lock mechanism, protecting its internal lever and hardware.

Causes of a bad lever cover can include damage from regular opening and closing of the freezer door over time. Accidental impacts or heavy impacts from moving the refrigerator could also crack or weaken the plastic material.

Symptoms of a bad lever cover include:

• Exposure of the lock mechanism that allows dust and debris to enter
• Improper shielding of lock parts leading to potential jamming issues
• Cracking or breakage of the plastic allowing outside contaminants inside

This OEM LG part is also compatible with some Kenmore models.

Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.

Roller component for the ice dispenser door handle on bottom-mount refrigerators. Replaces broken, worn, or missing rollers. Ensures smooth handle operation.

Seals the ice bank door to prevent warm air from melting ice and causing clumping. Replace if ice melts, refreezes into clumps, or frost forms around the bin.

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.