Parts for Ge JGB720EEJ2ES: Gas & Burner Parts

Converts your gas range from natural gas to liquid propane. Includes orifices and components needed for safe fuel changeover. Order if converting to LP.

Converts your gas range to liquid propane for high-altitude use. Ensures proper gas flow, easy ignition, and stable flames in low-pressure conditions. Confirm fit with your model number before ordering.

Convert your gas range for proper operation above 2000 feet elevation. This high altitude kit adjusts air-fuel mixture for optimal performance at altitude.

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

This small cooktop bracket secures designated components beneath the cooktop surface, keeping them properly positioned and stable. Replace a damaged or missing bracket to restore alignment and reduce movement or rattling during use.

• Provides mounting support for specific under-top components, per model design
• Helps maintain proper alignment and stability of cooktop parts
• Replace when visibly bent, cracked, or corroded

• Disconnect power; for gas models, also shut off gas and allow the unit to cool
• Remove surface components as required (grates/caps/heads for gas; elements/panels for electric) to access under the top
• Lift or remove the cooktop as directed in your model's service information and secure the new bracket with existing hardware
• Reassemble, verify alignment, and for gas units check for leaks if any gas connections were disturbed

This is a medium-sized surface burner base (also called an orifice holder or injector) that supports and positions the burner on the cooktop. It ensures proper gas flow and flame alignment for the burner. Replace this part if your burner sits unevenly, has an irregular flame pattern, or if the original base is cracked or damaged.

Burners won't light or igniters click constantly? This igniter switch and wiring harness assembly restores spark ignition on gas range surface burners.

Gas range burners not lighting evenly or weak flames? The manifold pipe distributes gas from the valve to each burner. Moderate DIY repair for most models.

This is a surface burner base with a built-in gas injector for a cooking range. The base supports the burner cap and head while the injector meters the gas flow to produce the correct flame size. Replace this component if you experience uneven flames, difficulty igniting the burner, or if the base is cracked or corroded.

Protective cover that slips over the gas valve shaft to shield valve components from spills, food debris, and moisture. Replace if cracked or missing.

Fix weak or uneven flames with this burner orifice holder. Secures the gas orifice to ensure proper alignment and consistent ignition on your range.

Fixes burner not lighting or uneven flame. This orifice holder secures the gas burner orifice for proper alignment and stable flame on your gas range.

Weak or uneven flame from your gas range burner? The orifice holder secures the gas spud for proper alignment and consistent fuel delivery to burners.

Replace your gas range oven orifice holder if burners won't light or you're converting between LP and natural gas. Simple socket wrench repair for most DIYers.

Uneven flames or weak ignition? This orifice holder secures your gas range burner orifice for proper alignment and consistent gas flow to the burner.

Fix uneven flames or burner ignition issues with this gas range bake burner tube. Delivers gas from valve to burner for proper heating and baking.

Carries gas from the pressure regulator to the burner valve manifold on your gas range. Replace if the tube is damaged, cracked, or leaking to restore safe fuel flow.

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

Fix uneven browning or weak broiling with this oven broil burner. Restores high-temperature top-down cooking for proper searing and browning.

Insulation pad that wraps around the burner box assembly beneath the cooktop. Replace if torn, compressed, disintegrated, or missing to restore heat protection.

Weak or uneven flames on your gas range? A clogged or damaged orifice spud restricts gas flow to the burner. Simple replacement restores proper flame size.

LP gas orifice spud for converting gas range burners from natural gas to propane. Replace if missing, damaged, or switching fuel types on cooktop.

Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.

Burner won't light or flame is uneven? This orifice spud secures the gas orifice for consistent flow and proper ignition. Simple DIY fix for range burners.

Burner won't ignite or flame is uneven? This surface burner valve regulates gas flow to each burner for precise temperature control on your gas range.

Fix a burner that won't ignite or produce gas with this surface burner valve. Controls gas flow to individual burners on your gas range or cooktop.

Gas burner won't light or heats unevenly? This burner valve controls gas flow to your cooktop. Moderate DIY repair requiring stovetop disassembly.

Burner won't light or flame won't adjust? This surface burner valve regulates gas flow to restore precise flame control on your gas range cooktop.

Fix burners that won't spark or ignite with this range electrode and harness assembly. Restores proper ignition on all gas burners. DIY-friendly repair.

Fix stiff knobs or poor flame control on your gas range. This surface burner valve assembly regulates gas flow for smooth ignition and consistent heat.

Oven won't heat or ignite? A failing igniter is the most common cause. This glow bar igniter heats up and draws current to open the gas valve. Easy DIY fix.

Fix a gas oven that won't heat or takes too long to preheat by replacing a weak or cracked igniter. This hot surface igniter lights the burner reliably.

Restores proper gas flow when burners won't light or flame is weak. This supply tube connects the valve to the burner for reliable ignition and heat.

Burner deflector guard for gas ranges. Installs around burner assembly to direct heat and protect components. Replace if cracked, warped, or missing.

This broil shield protects the oven interior above the broiler, helping direct heat and shielding the oven cavity from intense broiling temperatures for safer, more consistent broiling results. Durable metal construction resists warping. What it does:

• Shields the oven top and components from direct broiler heat to prevent damage and discoloration
• Helps maintain more even broiling by directing heat where food is placed
• Reduces the risk of flare-ups reaching wiring or insulation behind the oven liner
• Restores proper clearance between the burner and oven liner for safe operation

• One broil shield

• Disconnect power (and gas, if applicable) and allow the oven to cool completely before starting
• Remove oven racks and access the broiler area to unfasten and replace the shield using basic hand tools
• Inspect mounting tabs and surrounding liner; replace any damaged clips or screws as needed

Package of 12

Secures the thermostat assembly to your gas range or oven frame. Replace this mounting screw if it's stripped, missing, or damaged during repairs.

Secures the gas valve assembly to the frame of your range. Replace this bracket if it's bent, broken, or missing to properly mount the valve components.