Tommy L Hilton Head Island , SC July 04, 2019 Appliance: General Electric Laundry Center GTUP270EM1WW Lights on washer are lit and will not turn off. Washer will not turn on Remove the 2 screws that hold on the front cover just above the washer, the control board is in front of you. Remove the 2 small screws that secure the board, they are star screws, very small ones, do not drop them, for they will fall into the washer tub. Take a picture of the wiring harness, press the 2 tabs on each side of the board, left and right side, the board will pop out. replace the wiring harness, wiring harness has tabs that hold them in place. Also, check the magnetic lid switch, wiring connector is in a bad spot and will break. Read More... 7 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
James D Miami , FL March 28, 2015 Appliance: Model GTUN275GMWW The washing machine of my ge washer/dryer combo quit working It is 3 years old. I called the seller, they sent a tech a week later, he told me the control card was bad. They called me to say they didn't have it in stock, but they would order one and let me know when it arrives. Est. delivery time is 3-4 weeks. (seriously) I searched the internet for the card. Lots of suppliers, but Appliance parts pros was the cheapest. I ordered the card, it was received the next day. (3 different delivery options, I took the middle one) Popped the cover, swapped the card, and my machine is working again. Two days. I'll receive the quote from the seller in 3 more weeks. I'll be more than happy to let them know they are a little too slow. NOTE: GE has two models of the big washer/dryer combo. One is electronic, the other mechanical. Do yourself a big favor and go with the mechanical. Thanks to APP, BTW. Impressive service - easy to find, easy to order. Read More... 6 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Jessica Z Valencia , CA March 13, 2016 All of the status light were flashing and the washer was dead After consulting with the friendly staff at AppliancePros we determined it was the control board. I ordered the part it arrived in 2 days 5 minutes to replace it and washer back in service. Thank you apliance parts pros... Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Lori L Phoenix , AZ October 27, 2019 My GE stackable washer had no power no lights no error code I ordered the main control board, watched a video and took a chance that a 62-year-old woman could handle this repair & I was successful! The only glitch was that it had a very small star-shaped screw holding the board to it's the bracket that I couldn't see until I took the whole bracket off which added a little time to the repair but all in all it was a very smooth repair. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Paul L Braintree , MA October 01, 2022 Control board. It was very easy to fix. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers