General Electric Freezer Parts

A 6 x 1/2 inch pan-head Phillips screw used to fasten panels, trim, brackets and small assemblies on appliances. Replacing worn or missing screws restores secure mounting and reduces vibration or rattling. What it does:

• Fastens panels, brackets and trim where a 6 x 1/2 in. pan-head Phillips screw is required.
• Stops loose or rattling parts caused by missing, stripped or corroded screws.
• Provides the correct head profile for a Phillips driver to allow proper torque and seating.
• Used in non-structural fastening points on appliances.

• Always disconnect power and unplug the appliance before beginning repairs.
• Use the correct-size Phillips screwdriver to avoid cam-out and head damage.
• Do not over-tighten; over-torquing can strip threads or deform mating parts.
• Inspect mating threads and replace damaged components before installation.

This clear interior light cover protects the refrigerator lamp while letting bright light illuminate shelves and food. It keeps the bulb shielded and helps maintain even lighting so you can see contents clearly. What it does:

• Covers and protects the interior lamp from spills and direct contact
• Diffuses light for more even illumination inside the compartment
• Helps prevent damage to the bulb from impacts or debris
• Commonly replaces cracked, cloudy, or missing light lenses

• One replacement light cover

• Disconnect power or unplug appliance before replacing the lens
• Remove old cover carefully and snap or screw new cover into place
• Use only the exact replacement to ensure proper fit and safe clearance from the bulb
• If the bulb or socket is damaged, replace those components as well; avoid handling bulbs with bare hands while hot

This DC evaporator fan motor assembly circulates cold air across the evaporator coil to maintain proper refrigerator/freezer temperatures and efficient cooling. Replaces a failed or noisy evaporator fan to restore normal airflow. What it does:

• Spins the evaporator fan blade to move cold air through the evaporator and into the cabinet.
• Helps prevent frost buildup by maintaining airflow across the coil.
• Common symptoms of failure: loud or grinding noise, fan not running, uneven cooling, or warm compartments.
• Works as the airflow drive behind frost buildup and temperature fluctuation issues when the compressor and thermostat are otherwise functioning.

• One evaporator fan motor assembly (DC) as shown.

• Disconnect power at the breaker or unplug the appliance before starting any repairs.
• Access typically requires removing interior panels/evaporator cover and handling evaporator components carefully to avoid coil damage.
• Confirm connector orientation and secure mounting; test operation before reassembling panels.
• If you find ice on the evaporator, fully defrost the compartment and verify no air leaks or drainage issues remain.

This is a bottom door hinge screw that secures the lower hinge assembly to the appliance door, restoring proper alignment and stable door movement. Use it to replace stripped, missing, or damaged hinge hardware. What it does

• Secures the bottom hinge to the door and helps keep the door aligned and level.
• Restores smooth, consistent opening and closing when a worn or missing screw causes sagging or misalignment.
• Prevents further wear to hinge components by maintaining correct hinge positioning.
• Works with original hinge assemblies; use the correct screw to avoid loose or unstable doors.

• Disconnect power to the appliance before performing any door or hinge repairs.
• Support the door while removing/installing the hinge screw to prevent the door from falling or causing injury.
• Use the correct screwdriver or bit to avoid stripping the screw head.
• Replace any additional worn hinge hardware as needed for proper alignment.

This shoulder screw secures components while creating a precise spacer point for proper alignment and movement. Durable hardware replacement for assemblies that rely on a fixed shoulder to control travel and spacing. What it does:

• Acts as a fastener and built-in spacer to position components accurately
• Provides a smooth, cylindrical shoulder for moving parts to bear against
• Prevents over-insertion of screws and helps maintain alignment of panels or linkages
• Common symptom: missing, stripped, or damaged shoulder screw can cause loose parts, misalignment, or rattling

• Disconnect power and follow appliance safety procedures before servicing
• Use the correct driver and avoid overtightening to protect threads and shoulder
• Keep small parts secure during installation to prevent loss or damage

This axle wheel is a replacement drum support component that helps the dryer drum roll smoothly and quietly. Replacing a worn axle wheel restores proper drum alignment and reduces noise or binding during operation. What it does:

• Supports and centers the dryer drum on its axle so the drum turns freely
• Replaces worn or damaged wheel surfaces that cause squeaks, grinding, or rubbing
• Helps prevent drum wobble and uneven wear on the drum seal or rollers
• Works as part of the drum support system to maintain smooth rotation

• One axle wheel

• Disconnect power before starting and work on a cool, empty dryer
• Removing the dryer front or drum may be required to access and replace the wheel
• Inspect other drum support components (rollers, glides, bearings) and replace as needed