General Electric Microwave Touch Pad

This control panel assembly is the front user interface housing for your appliance. Replace a cracked, loose, or damaged panel to restore a secure fit and dependable access to the controls for everyday operation.

• Holds and aligns the keypad, display, and related switches for proper use
• Provides mounting points for the electronic control components
• Protects internal controls from everyday wear and minor impacts
• Helps address issues like a broken bezel, missing tabs, or a loose/misaligned panel
• Restores a clean, factory look to the user interface area

• Disconnect power at the breaker before servicing
• Remove trim/grille and mounting screws; support the panel to avoid stressing wiring
• Transfer any brackets, switches, and display/board from the original panel, noting wire locations
• Reassemble and test all controls before final mounting

This control panel assembly restores the microwave's user interface—the area you press to select cook options and view the display. Replace a cracked, loose, or unresponsive panel to bring normal controls and appearance back.

• Forms the front user-interface area for selecting functions and viewing time/status
• Provides the fascia and mounting structure for the control components behind the panel
• Helps resolve non-responsive keys, stuck buttons, or damaged/broken panel trim
• Restores proper alignment and a finished look of the control area

• Disconnect power at the breaker before servicing; microwaves contain high-voltage components
• Remove mounting screws, lift off the panel, and label/disconnect wiring harnesses
• Transfer any reusable components (control board, display, brackets/clips) from the old panel as required by your model
• Reinstall, secure fasteners, restore power, and test all keypad functions.

This control panel assembly replaces the front user interface on compatible ranges, providing a stainless-steel surface and mounting for the keypad and display so oven controls function and look complete again. What it does:

• Replaces the appliance's front control surface and secures the keypad and display.
• Restores usable buttons and clear markings when the original panel is cracked, dented, or worn.
• Helps address unresponsive or intermittent button operation caused by a damaged or loose panel.
• Provides a finished stainless-steel appearance and proper mounting for internal control components.

• Disconnect power at the breaker before beginning work; verify the appliance is de-energized.
• Handle the panel and finish carefully to avoid scratches; use proper fasteners and gaskets as shown in the service diagram.
• Removal may require accessing internal panels or removing the oven door—follow the OEM service instructions.

This control panel assembly replaces the front user console on compatible GE ranges and ovens, restoring reliable button and display control for oven functions and temperature settings. It helps bring back normal operation when the console is unresponsive or buttons fail. What it does:

• Houses the user interface for oven controls, including key switches and display area
• Allows selection of bake, broil, timer and other cooking functions
• Restores responsive keypad/buttons and proper command signals to the range control
• Commonly used when buttons are unresponsive, display is dim/blank, or controls act intermittently

• One control panel assembly (console) as shown

• Disconnect power at the breaker before starting; risk of electrical shock if power remains connected
• Basic disassembly of the oven/range front bezel is usually required; handle the display and ribbon cables with care

This part is a control panel assembly that is used on a microwave unit. This particular control panel is white in color and features all of the buttons that control the appliance. It also features a digital display.In the event that any of the buttons on the control panel do not work, this part will need to be replaced. Over time and with use, the text on the buttons may begin to wear off due to normal wear and tear. If this is the case, this part can be replaced so that the text identifying the functions can be seen. It's imperative that the microwave is unplugged from the electrical outlet before attempting to replace this part.This specific control panel assembly is compatible with microwaves that are manufactured by General Electric. It is sold individually and sourced from the manufacturer.

This control panel assembly replaces the front console controls and trim to restore clear touch/key operation and a clean stainless-steel appearance. It provides the user interface and mounting surface for the range/oven control components. What it does

• Houses the touchpads/buttons and display window used to set oven functions and temperatures
• Restores responsive control input when worn, cracked, or cosmetically damaged
• Re-establishes a finished stainless-steel front for a consistent appearance
• Helps resolve intermittent or unresponsive control-panel behavior when the assembly is the faulty component

• One control panel assembly (stainless steel)

• High-level replacement; disconnect power at the breaker before starting to avoid shock
• Installation typically requires removing the oven/range door and trim to access mounting screws and connectors
• Handle wiring harness connections gently and match connector positions when reassembling

This control panel is the user console that houses the oven/range buttons and display, restoring normal operation and allowing program selection and status feedback. It replaces a cracked, unresponsive, or damaged front console. What it does:

• Provides the front keypad and display interface for programming temperatures, timers, and oven functions
• Restores responsive button input and clear status readouts when the original panel is cracked, worn, or non-functional
• Helps resolve issues where controls do not register presses or the display is obscured
• Works as the main user-access point for starting and stopping cycles and setting options

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Handle the panel carefully to avoid bending or damaging the display and connectors
• Some installations require removing the oven console trim and disconnecting wiring harnesses; keep screws and small parts organized

A replacement control panel sub-assembly that restores the appliance's front console interface so the control board, touchpad or display connections sit securely and function correctly. Use when the console housing is cracked, loose, or failing to hold controls. What it does:

• Provides the mounting and connection point for the oven/range control board, touchpad and display components.
• Helps ensure reliable electrical connections between the user controls and main control electronics.
• Commonly replaces a damaged, cracked, or warped console that causes unresponsive buttons, intermittent display issues, or loose controls.
• Supports normal operation of front-panel features once the underlying electronic components are secure.

• One control panel sub-assembly.

• Always disconnect power to the appliance before starting any repair to avoid shock or injury.
• Handle the panel carefully to avoid scratching painted surfaces or damaging clips; some disassembly of the console and removal of knobs or trim may be required.
• Verify connector seating and routing during reassembly to prevent pinched wires or loose connections.
• If control buttons or the display still don't work after installation, the issue may be the touchpad or main control board—test those components separately.

This control panel is the user interface assembly that houses the touchpads/buttons and display used to operate the range/oven. Replacing a damaged or unresponsive panel restores normal control and visible cycle feedback. What it does:

• Provides the buttons/touchpads and display needed to select bake, broil, timers, and other oven functions
• Relays user commands to the oven's main control so cycles start and stop as expected
• Restores visible status/error indicators when the original panel is cracked, faded, or nonresponsive
• Helps resolve common symptoms like unresponsive buttons, missing display segments, or erratic control behavior

• One control panel (user interface assembly)

• Disconnect power at the breaker before beginning any work to avoid shock or injury
• Handle the panel and any attached ribbon/cable with care to avoid damaging fragile connectors or the display
• Basic hand tools are typically needed to remove trim and fasteners; reattach connectors securely before restoring power